There is desktop box with sid.
sudo lspci|grep -i vga 08:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] So far I have monitor connected via DVI Recently I connected monitor via hdmi output (instead old one) And strange things starts happend. When I tried to play movie with vlc there were hand for few seconds and then monitor "resets", and there were only black rectanle - have to reopen movie. In logs I got something like: alfa kernel: [114324.608912] [drm:cypress_dpm_set_power_state [radeon]] *ERROR* rv770_restrict_performance_levels_before_switch failed alfa kernel: [114335.021950] radeon 0000:08:00.0: ring 5 stalled for more than 10252msec alfa kernel: [114335.021959] radeon 0000:08:00.0: GPU lockup (current fence id 0x000000000002112c last fence id 0x0000000000021130 on ring 5) alfa kernel: [114335.533922] radeon 0000:08:00.0: ring 5 stalled for more than 10764msec alfa kernel: [114335.533931] radeon 0000:08:00.0: GPU lockup (current fence id 0x000000000002112c last fence id 0x0000000000021130 on ring 5) alfa kernel: [114336.047455] radeon 0000:08:00.0: couldn't schedule ib alfa kernel: [114336.047519] [drm:radeon_uvd_suspend [radeon]] *ERROR* Error destroying UVD (-22)! alfa kernel: [114336.047581] radeon 0000:08:00.0: couldn't schedule ib alfa kernel: [114336.047606] [drm:radeon_uvd_suspend [radeon]] *ERROR* Error destroying UVD (-22)! alfa kernel: [114336.048724] radeon 0000:08:00.0: Saved 23 dwords of commands on ring 0. alfa kernel: [114336.048738] radeon 0000:08:00.0: GPU softreset: 0x00000019 alfa kernel: [114336.048741] radeon 0000:08:00.0: GRBM_STATUS = 0xE0001CA0 alfa kernel: [114336.048744] radeon 0000:08:00.0: GRBM_STATUS_SE0 = 0x80000003 alfa kernel: [114336.048747] radeon 0000:08:00.0: GRBM_STATUS_SE1 = 0x00000007 alfa kernel: [114336.048749] radeon 0000:08:00.0: SRBM_STATUS = 0x200800C0 alfa kernel: [114336.048752] radeon 0000:08:00.0: SRBM_STATUS2 = 0x00000000 alfa kernel: [114336.048755] radeon 0000:08:00.0: R_008674_CP_STALLED_STAT1 = 0x01000000 alfa kernel: [114336.048758] radeon 0000:08:00.0: R_008678_CP_STALLED_STAT2 = 0x00011000 alfa kernel: [114336.048760] radeon 0000:08:00.0: R_00867C_CP_BUSY_STAT = 0x00068404 alfa kernel: [114336.048763] radeon 0000:08:00.0: R_008680_CP_STAT = 0x80878647 alfa kernel: [114336.048766] radeon 0000:08:00.0: R_00D034_DMA_STATUS_REG = 0x44C83D57 alfa kernel: [114336.062121] radeon 0000:08:00.0: GRBM_SOFT_RESET=0x00007F6B alfa kernel: [114336.062283] radeon 0000:08:00.0: SRBM_SOFT_RESET=0x00000100 alfa kernel: [114336.063441] radeon 0000:08:00.0: GRBM_STATUS = 0x00003828 alfa kernel: [114336.063445] radeon 0000:08:00.0: GRBM_STATUS_SE0 = 0x00000007 alfa kernel: [114336.063447] radeon 0000:08:00.0: GRBM_STATUS_SE1 = 0x00000007 alfa kernel: [114336.063450] radeon 0000:08:00.0: SRBM_STATUS = 0x200800C0 alfa kernel: [114336.063453] radeon 0000:08:00.0: SRBM_STATUS2 = 0x00000000 alfa kernel: [114336.063456] radeon 0000:08:00.0: R_008674_CP_STALLED_STAT1 = 0x00000000 alfa kernel: [114336.063458] radeon 0000:08:00.0: R_008678_CP_STALLED_STAT2 = 0x00000000 alfa kernel: [114336.063461] radeon 0000:08:00.0: R_00867C_CP_BUSY_STAT = 0x00000000 alfa kernel: [114336.063463] radeon 0000:08:00.0: R_008680_CP_STAT = 0x00000000 alfa kernel: [114336.063466] radeon 0000:08:00.0: R_00D034_DMA_STATUS_REG = 0x44C83D57 alfa kernel: [114336.063479] radeon 0000:08:00.0: GPU reset succeeded, trying to resume alfa kernel: [114336.088752] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). alfa kernel: [114336.088885] radeon 0000:08:00.0: WB enabled alfa kernel: [114336.088890] radeon 0000:08:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 alfa kernel: [114336.088893] radeon 0000:08:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c alfa kernel: [114336.089607] radeon 0000:08:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 alfa kernel: [114336.106128] [drm] ring test on 0 succeeded in 1 usecs alfa kernel: [114336.106140] [drm] ring test on 3 succeeded in 2 usecs alfa kernel: [114336.282680] [drm] ring test on 5 succeeded in 1 usecs alfa kernel: [114336.282694] [drm] UVD initialized successfully. alfa kernel: [114336.325529] [drm] ib test on ring 0 succeeded in 0 usecs alfa kernel: [114336.325592] [drm] ib test on ring 3 succeeded in 0 usecs alfa kernel: [114337.073849] [drm] ib test on ring 5 succeeded this is quite reproductible. Can I make anything about it? When I back to DVI monitor everthing work without errors. KJ -- http://stopstopnop.pl/stop_stopnop.pl_o_nas.html
