I just intalled this.
I do not know what to do with it.
Here is an ifconfig
eth0 Link encap:Ethernet HWaddr 00:50:BF:5A:A2:02
inet addr:10.200.1.1 Bcast:10.200.1.254 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1535 errors:0 dropped:0 overruns:0 frame:0
TX packets:1497 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:339738 (331.7 KiB) TX bytes:145129 (141.7 KiB)
Interrupt:10 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:27 errors:0 dropped:0 overruns:0 frame:0
TX packets:27 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1716 (1.6 KiB) TX bytes:1716 (1.6 KiB)
ppp3 Link encap:Point-to-Point Protocol
inet addr:80.178.82.15 P-t-P:212.199.28.249 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:112 (112.0 b) TX bytes:217 (217.0 b)
Note: first time I ever saw the ppp3 item here--might be thefirewall. I have
not seen this again. Connection was down at the time. I pon'ed and did this:
ifconfig ppp0
ppp0 Link encap:Point-to-Point Protocol
POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:128 (128.0 b) TX bytes:0 (0.0 b
My ADSL model is 10.0.0.138
Assigned IP is 10.200.1.1
submask assigned is 255.0.0.0
network got assigned 10.200.1.0
broadcast assigned 10.200.1.154
gateway 10.0.0.138
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
