On 7/27/20 3:40 PM, Nicolas George wrote: > Georgi Naplatanov (12020-07-27): >> https://linux.die.net/man/1/scanimage >> >> "The -d or --device-name options must be followed by a SANE device-name >> like 'epson:/dev/sg0' or 'hp:/dev/usbscanner0'. A (partial) list of >> available devices can be obtained with the --list-devices option (see >> below). If no device-name is specified explicitly, scanimage reads a >> device-name from the environment variable SANE_DEFAULT_DEVICE. If this >> variable is not set, scanimage will attempt to open the first available >> device. " > > Thanks. > > Unfortunately, it does not work: for GUI tools, this environment > variable pre-selects the device in the device selection dialog, but it > does not make it appear if it is not detected (?!???@!%@?!!!?). > > Also, it works for only one scanner. >
Hi, I'm not sure how you share the scanner(s) - with saned or if those are some kind of network scanners. In case you share these scanners with saned then this article may be helpful for you. https://feeding.cloud.geek.nz/posts/setting-up-a-network-scanner-using-sane/ My understanding is that you have to add scanners' IP addresses in /etc/sane.d/net.conf Kind regards Georgi
