I recently set up two 9 gig scsi drives on my machine. Discovered
that an attempt to copy data from one array to another results in
"I/O error. Attempt to access beyond end of device". Data copies
to/from either raid array to/from a non-raid partition work properly.
Googling found references to a similar problem in the 2.2 kernels
but not the 2.4 series.
Running Debian Woody and the mdadm daemon.
------------------/etc/raidtab---------------------------------
raiddev /dev/md0
raid-level linear
nr-raid-disks 2
chunk-size 32
persistent-superblock 1
device /dev/sda2
raid-disk 0
device /dev/sdb2
raid-disk 1
raiddev /dev/md1
raid-level 1
nr-raid-disks 2
nr-spare-disks 1
chunk-size 32
persistent-superblock 1
device /dev/sda1
raid-disk 0
device /dev/sdb1
raid-disk 1
device /dev/hda11
spare-disk 0
--------------------------------------------------------------------
All partitions in arrays set to Linux Raid Autodetect with ext3 FS.
--------------------------/etc/fstab--------------------------------
/dev/hda6 / ext3 errors=remount-ro 0 1
/dev/hda12 none swap sw 0 0
proc /proc proc defaults 0 0
/dev/fd0 /mnt/floppy auto user,noauto 0 0
/dev/scd0 /mnt/cdrom iso9660 ro,user,noauto 0 0
/dev/md0 /mnt/home auto user,rw 0 0
/dev/md1 /mnt/sda2 auto user,rw 0 0
/dev/hda1 /mnt/win_c auto user,rw 0 0
/dev/hda5 /mnt/win_d auto user,rw 0 0
/dev/hda7 /mnt/hda7 auto user,rw 0 0
/dev/hda8 /mnt/hda8 auto user,rw 0 0
/dev/hda9 /mnt/hda9 auto user,rw 0 0
/dev/hda10 /mnt/hda10 auto user,rw 0 0
#10.0.0.11 /mnt/jorgen nfs user,rw 0 0
^^^^^^My home server, named after Jorgen Von Strangle
----------------Partition info----------------------------------------
/dev/sda1: 1 gig
/dev/sda2: 7.5 gig
/dev/sdb1: 1 gig
/dev/sdb2: 7.5 gig
/dev/hda11: 1 gig
---------------------Output of dmesg--------------------------------
Linux version 2.4.18-386 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian
prerelease)) #2 Sun Apr 14 10:38:08 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 63472
zone(0): 4096 pages.
zone(1): 59376 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=306
Initializing CPU#0
Detected 474.979 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 946.99 BogoMIPS
Memory: 245332k/253888k available (895k kernel code, 8172k reserved, 233k data, 192k
init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002
CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
CPU: Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:01.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.10 (20020120) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2616 blocks [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
Freeing initrd memory: 2616k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 192k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Journalled Block Device driver loaded
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS530
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD600BB-00CAA1, ATA DISK drive
hdc: SAMSUNG CD-R/RW SW-248F, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [7297/255/63] p1 p2 < p5 p6 p7 p8 p9 p10 p11
p12 >
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 248968k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
PCI: Found IRQ 11 for device 00:09.0
eth0: Lite-On PNIC-II rev 37 at 0xe000, 00:A0:CC:E6:F9:83, IRQ 11.
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 12 for device 00:0d.0
sym53c8xx: at PCI bus 0, device 13, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875 detected
sym53c875-0: rev 0x3 on pci bus 0 device 13 function 0 irq 12
sym53c875-0: ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.3c-20010512
Vendor: QUANTUM Model: XP39100W Rev: LXY4
Type: Direct-Access ANSI SCSI revision: 02
Vendor: QUANTUM Model: XP39100W Rev: LYK8
Type: Direct-Access ANSI SCSI revision: 02
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SAMSUNG Model: CD-R/RW SW-248F Rev: R601
Type: CD-ROM ANSI SCSI revision: 02
es1371: version v0.30 time 10:44:51 Apr 14 2002
PCI: Found IRQ 10 for device 00:0b.0
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xe400 irq 10
es1371: features: joystick 0x0
ac97_codec: AC97 codec, id: 0x5452:0x4123 (TriTech TR A5)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xd00df000, IRQ 5
usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: USB new device connect on bus1/1, assigned device number 2
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: USB device 3 (vend/prod 0x46d/0xc402) is not claimed by any active driver.
hub.c: USB new device connect on bus1/1/1, assigned device number 4
usb.c: USB device 4 (vend/prod 0x43d/0x7c) is not claimed by any active driver.
hub.c: USB new device connect on bus1/1/2, assigned device number 5
usb.c: USB device 5 (vend/prod 0x43d/0x7b) is not claimed by any active driver.
Real Time Clock Driver v1.10e
usb.c: registered new driver usb_mouse
input0: Logitech Trackball on usb1:3.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver usblp
usb.c: ignoring set_interface for dev 5, iface 0, alt 0
printer.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0
printer.c: v0.8:USB Printer Device Class driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: linear personality registered as nr 1
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 2, lun 0
sym53c875-0-<1,*>: FAST-5 WIDE SCSI 10.0 MB/s (200.0 ns, offset 16)
SCSI device sda: 17781520 512-byte hdwr sectors (9104 MB)
/dev/scsi/host0/bus0/target1/lun0: p1 p2
sym53c875-0-<2,*>: FAST-5 WIDE SCSI 10.0 MB/s (200.0 ns, offset 16)
SCSI device sdb: 17781520 512-byte hdwr sectors (9104 MB)
/dev/scsi/host0/bus0/target2/lun0: p1 p2
[events: 00000004]
[events: 00000004]
md: autorun ...
md: considering scsi/host0/bus0/target2/lun0/part2 ...
md: adding scsi/host0/bus0/target2/lun0/part2 ...
md: adding scsi/host0/bus0/target1/lun0/part2 ...
md: created md0
md: bind<scsi/host0/bus0/target1/lun0/part2,1>
md: bind<scsi/host0/bus0/target2/lun0/part2,2>
md: running: <scsi/host0/bus0/target2/lun0/part2><scsi/host0/bus0/target1/lun0/part2>
md: scsi/host0/bus0/target2/lun0/part2's event counter: 00000004
md: scsi/host0/bus0/target1/lun0/part2's event counter: 00000004
md0: max total readahead window set to 124k
md0: 1 data-disks, max readahead per data-disk: 124k
md: updating md0 RAID superblock on device
md: scsi/host0/bus0/target2/lun0/part2 [events: 00000005]<6>(write)
scsi/host0/bus0/target2/lun0/part2's sb offset: 658560
md: scsi/host0/bus0/target1/lun0/part2 [events: 00000005]<6>(write)
scsi/host0/bus0/target1/lun0/part2's sb offset: 995904
md: ... autorun DONE.
[events: 00000006]
[events: 00000006]
[events: 00000006]
md: autorun ...
md: considering ide/host0/bus0/target0/lun0/part11 ...
md: adding ide/host0/bus0/target0/lun0/part11 ...
md: adding scsi/host0/bus0/target2/lun0/part1 ...
md: adding scsi/host0/bus0/target1/lun0/part1 ...
md: created md1
md: bind<scsi/host0/bus0/target1/lun0/part1,1>
md: bind<scsi/host0/bus0/target2/lun0/part1,2>
md: bind<ide/host0/bus0/target0/lun0/part11,3>
md: running:
<ide/host0/bus0/target0/lun0/part11><scsi/host0/bus0/target2/lun0/part1><scsi/host0/bus0/target1/lun0/part1>
md: ide/host0/bus0/target0/lun0/part11's event counter: 00000006
md: scsi/host0/bus0/target2/lun0/part1's event counter: 00000006
md: scsi/host0/bus0/target1/lun0/part1's event counter: 00000006
md: RAID level 1 does not need chunksize! Continuing anyway.
md1: max total readahead window set to 124k
md1: 1 data-disks, max readahead per data-disk: 124k
raid1: spare disk ide/host0/bus0/target0/lun0/part11
raid1: device scsi/host0/bus0/target2/lun0/part1 operational as mirror 1
raid1: device scsi/host0/bus0/target1/lun0/part1 operational as mirror 0
raid1: raid set md1 active with 2 out of 2 mirrors
md: updating md1 RAID superblock on device
md: ide/host0/bus0/target0/lun0/part11 [events: 00000007]<6>(write)
ide/host0/bus0/target0/lun0/part11's sb offset: 995904
md: scsi/host0/bus0/target2/lun0/part1 [events: 00000007]<6>(write)
scsi/host0/bus0/target2/lun0/part1's sb offset: 8225152
md: scsi/host0/bus0/target1/lun0/part1 [events: 00000007]<6>(write)
scsi/host0/bus0/target1/lun0/part1's sb offset: 7887808
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on md(9,0), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on md(9,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
reiserfs: checking transaction log (device 03:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,10), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb-uhci.c: $Revision: 1.275 $ time 10:45:48 Apr 14 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 10:45:48 Apr 14 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
[drm] Initialized sis 1.0.0 20010503 on minor 0
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.1
PPP BSD Compression module registered
PPP Deflate Compression module registered
------------------/var/log/messages-----------------------------------
Dec 1 16:19:12 Riverwillow kernel: NCR53c406a: no available ports found
Dec 1 16:19:12 Riverwillow kernel: sym53c416.c: Version 1.0.0
Dec 1 16:19:12 Riverwillow kernel: sym53c8xx: at PCI bus 0, device 13, function 0
Dec 1 16:19:12 Riverwillow kernel: sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
Dec 1 16:19:12 Riverwillow kernel: sym53c8xx: 53c875 detected
Dec 1 16:19:12 Riverwillow kernel: sym53c875-0: rev 0x3 on pci bus 0 device 13
function 0 irq 12
Dec 1 16:19:12 Riverwillow kernel: sym53c875-0: ID 7, Fast-20, Parity Checking
Dec 1 16:19:12 Riverwillow kernel: ncr53c8xx: at PCI bus 0, device 13, function 0
Dec 1 16:19:12 Riverwillow kernel: ncr53c8xx: IO region 0xe800[0..127] is in use
Dec 1 16:19:12 Riverwillow kernel: Failed initialization of WD-7000 SCSI card!
Dec 1 16:19:12 Riverwillow kernel: IBM MCA SCSI: Version 3.2
Dec 1 16:19:12 Riverwillow kernel: IBM MCA SCSI: No Microchannel-bus present -->
Aborting.
Dec 1 16:19:12 Riverwillow kernel: This machine does not have any IBM
MCA-bus
Dec 1 16:19:12 Riverwillow kernel: or the MCA-Kernel-support is not
enabled!
Dec 1 16:19:12 Riverwillow kernel: megaraid: v1.11 (Aug 23, 2000)
Dec 1 16:19:12 Riverwillow kernel: aec671x_detect:
Dec 1 16:19:12 Riverwillow kernel: 3ware Storage Controller device driver for Linux
v1.02.00.008.
Dec 1 16:19:12 Riverwillow kernel: 3w-xxxx: tw_findcards(): No cards found.
Dec 1 16:19:12 Riverwillow kernel: scsi0 : sym53c8xx-1.7.1-20000726
Dec 1 16:19:12 Riverwillow kernel: scsi : 1 host.
Dec 1 16:19:12 Riverwillow kernel: Vendor: QUANTUM Model: XP39100W Rev:
LXY4
Dec 1 16:19:12 Riverwillow kernel: Type: Direct-Access ANSI
SCSI revision: 02
Dec 1 16:19:12 Riverwillow kernel: Detected scsi disk sda at scsi0, channel 0, id 1,
lun 0
Dec 1 16:19:12 Riverwillow kernel: Vendor: QUANTUM Model: XP39100W Rev:
LYK8
Dec 1 16:19:12 Riverwillow kernel: Type: Direct-Access ANSI
SCSI revision: 02
Dec 1 16:19:12 Riverwillow kernel: Detected scsi disk sdb at scsi0, channel 0, id 2,
lun 0
Dec 1 16:19:12 Riverwillow kernel: scsi : detected 2 SCSI disks total.
Dec 1 16:19:12 Riverwillow kernel: sym53c875-0-<1,*>: FAST-5 WIDE SCSI 10.0 MB/s (200
ns, offset 16)
Dec 1 16:19:12 Riverwillow kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors=
17781520 [8682 MB] [8.7 GB]
Dec 1 16:19:12 Riverwillow kernel: sym53c875-0-<2,*>: FAST-5 WIDE SCSI 10.0 MB/s (200
ns, offset 16)
Dec 1 16:19:12 Riverwillow kernel: SCSI device sdb: hdwr sector= 512 bytes. Sectors=
17781520 [8682 MB] [8.7 GB]
Dec 1 16:19:12 Riverwillow kernel: Partition check:
Dec 1 16:19:12 Riverwillow kernel: sda: sda1 < sda5 sda6 >
Dec 1 16:19:12 Riverwillow kernel: sdb: sdb1 < sdb5 sdb6 >
Dec 1 16:19:12 Riverwillow kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10
hda11 hda12 >
------major snippage here. hope I didn't delete useful info-----------
Dec 1 11:30:59 Riverwillow kernel: md: autorun ...
Dec 1 11:30:59 Riverwillow kernel: md: considering ide/host0/bus0/target0/lun0/part11
...
Dec 1 11:30:59 Riverwillow kernel: md: adding ide/host0/bus0/target0/lun0/part11 ...
Dec 1 11:30:59 Riverwillow kernel: md: adding scsi/host1/bus0/target2/lun0/part5 ...
Dec 1 11:30:59 Riverwillow kernel: md: adding scsi/host1/bus0/target1/lun0/part5 ...
Dec 1 11:30:59 Riverwillow kernel: md: created md0
Dec 1 11:30:59 Riverwillow kernel: md: bind<scsi/host1/bus0/target1/lun0/part5,1>
Dec 1 11:30:59 Riverwillow kernel: md: bind<scsi/host1/bus0/target2/lun0/part5,2>
Dec 1 11:30:59 Riverwillow kernel: md: bind<ide/host0/bus0/target0/lun0/part11,3>
Dec 1 11:30:59 Riverwillow kernel: md: running:
<ide/host0/bus0/target0/lun0/part11><scsi/host1/bus0/target2/lun0/part5><scsi/host1/bus0/target1/lun0/part5>
Dec 1 11:30:59 Riverwillow kernel: md: ide/host0/bus0/target0/lun0/part11's event
counter: 00000019
Dec 1 11:30:59 Riverwillow kernel: md: scsi/host1/bus0/target2/lun0/part5's event
counter: 00000019
Dec 1 11:30:59 Riverwillow kernel: md: scsi/host1/bus0/target1/lun0/part5's event
counter: 00000019
Dec 1 11:30:59 Riverwillow kernel: md: RAID level 1 does not need chunksize!
Continuing anyway.
Dec 1 11:30:59 Riverwillow kernel: md0: max total readahead window set to 124k
Dec 1 11:30:59 Riverwillow kernel: md0: 1 data-disks, max readahead per data-disk:
124k
Dec 1 11:30:59 Riverwillow kernel: raid1: spare disk
ide/host0/bus0/target0/lun0/part11
Dec 1 11:30:59 Riverwillow kernel: raid1: device scsi/host1/bus0/target2/lun0/part5
operational as mirror 1
Dec 1 11:30:59 Riverwillow kernel: raid1: device scsi/host1/bus0/target1/lun0/part5
operational as mirror 0
Dec 1 11:30:59 Riverwillow kernel: raid1: raid set md0 active with 2 out of 2 mirrors
Dec 1 11:30:59 Riverwillow kernel: md: updating md0 RAID superblock on device
Dec 1 11:30:59 Riverwillow kernel: md: ide/host0/bus0/target0/lun0/part11 [events:
0000001a]<6>(write) ide/host0/bus0/target0/lun0/part11's sb offset: 995904
Dec 1 11:30:59 Riverwillow kernel: md: scsi/host1/bus0/target2/lun0/part5 [events:
0000001a]<6>(write) scsi/host1/bus0/target2/lun0/part5's sb offset: 995840
Dec 1 11:30:59 Riverwillow kernel: md: scsi/host1/bus0/target1/lun0/part5 [events:
0000001a]<6>(write) scsi/host1/bus0/target1/lun0/part5's sb offset: 995840
Dec 1 11:30:59 Riverwillow kernel: md: ... autorun DONE.
Dec 1 11:31:23 Riverwillow kernel: kjournald starting. Commit interval 5 seconds
Dec 1 11:31:23 Riverwillow kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on md(9,0),
internal journal
Dec 1 11:31:23 Riverwillow kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 1 11:32:04 Riverwillow kernel: attempt to access beyond end of device
Dec 1 11:32:04 Riverwillow kernel: 08:01: rw=0, want=2147483588, limit=1
Dec 1 11:32:04 Riverwillow kernel: md: could not read
scsi/host1/bus0/target1/lun0/part1's sb, not importing!
Dec 1 11:32:04 Riverwillow kernel: md: could not import
scsi/host1/bus0/target1/lun0/part1!
Dec 1 11:32:04 Riverwillow kernel: md: autostart scsi/host1/bus0/target1/lun0/part1
failed!
Dec 1 11:34:07 Riverwillow kernel: md: marking sb clean...
Dec 1 11:34:07 Riverwillow kernel: md: updating md0 RAID superblock on device
Dec 1 11:34:07 Riverwillow kernel: md: ide/host0/bus0/target0/lun0/part11 [events:
0000001b]<6>(write) ide/host0/bus0/target0/lun0/part11's sb offset: 995904
Dec 1 11:34:07 Riverwillow kernel: md: scsi/host1/bus0/target2/lun0/part5 [events:
0000001b]<6>(write) scsi/host1/bus0/target2/lun0/part5's sb offset: 995840
Dec 1 11:34:07 Riverwillow kernel: md: scsi/host1/bus0/target1/lun0/part5 [events:
0000001b]<6>(write) scsi/host1/bus0/target1/lun0/part5's sb offset: 995840
Dec 1 11:34:07 Riverwillow kernel: md: md0 stopped.
Dec 1 11:34:07 Riverwillow kernel: md: unbind<ide/host0/bus0/target0/lun0/part11,2>
Dec 1 11:34:07 Riverwillow kernel: md: export_rdev(ide/host0/bus0/target0/lun0/part11)
Dec 1 11:34:07 Riverwillow kernel: md: unbind<scsi/host1/bus0/target2/lun0/part5,1>
Dec 1 11:34:07 Riverwillow kernel: md: export_rdev(scsi/host1/bus0/target2/lun0/part5)
Dec 1 11:34:07 Riverwillow kernel: md: unbind<scsi/host1/bus0/target1/lun0/part5,0>
Dec 1 11:34:07 Riverwillow kernel: md: export_rdev(scsi/host1/bus0/target1/lun0/part5)
Dec 1 11:34:34 Riverwillow kernel: attempt to access beyond end of device
Dec 1 11:34:34 Riverwillow kernel: 08:01: rw=0, want=4, limit=1
Dec 1 11:35:13 Riverwillow kernel: Kernel logging (proc) stopped.
Dec 1 11:35:13 Riverwillow kernel: Kernel log daemon terminating.
Dec 1 11:35:13 Riverwillow exiting on signal 15
Dec 1 11:36:58 Riverwillow syslogd 1.4.1#10: restart.
----------------------------------------------------------------------
Any info would be appreciated.
Larry
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
