On Sat, 17 Feb 2018, Gene Heskett wrote:
~ # cat /etc/resolv.conf
search rogerprice.org
nameserver 8.8.8.8
Does the resolv.conf still contain that data?
Yes
On Sat, 17 Feb 2018, Gene Heskett wrote:
debian.proxad.net is 212.27.32.6. If you ping that?
Yes, works great even from a rock64 out in the garage.
Do a "sudo route -n" and see if you get a valid gateway, "UG" address.
Then describe your hardware arrangement precisely please
On Sat, 17 Feb 2018, Gene Heskett wrote:
On Saturday 17 February 2018 19:48:20 Rodary Jacques wrote:
I had this kind of problem with free (i.e. proxad) repository which
isn't any more (bust was in 2016) on the mirror list, and had to
replace it with <http://ftp.fr.debian.org/debian/> -not a ftp server-
in /etc/apt/sources.list. Salut. Jacques
debian.proxad.net pings just fine from a stretch install on an arm64
machine:
rock64@rock64:/media/slash/home/rock64$ ping debian.proxad.net
PING debian.proxad.net (212.27.32.66) 56(84) bytes of data.
64 bytes from debian.proxad.net (212.27.32.66): icmp_seq=1 ttl=50 time=107 ms
...
4 packets transmitted, 4 received, 0% packet loss, time 3003ms
Something is wrong with his gateway, or dns.
Thanks for all your comments, I repeated my attempt to install as follows:
Hardware: EeePC1201K (AMD Athlon 1000MHz, 1Gbyte)
External CD/DVD reader Samsung SE-S084.
Router: TP-Link 450M Wireless N Gigabit Model No. TL-WR1043ND. No IPv6
"Graphical expert install"
1. Configure the keyboard (AZERTY)
2. Detect and mount CD-ROM
3. Load installer components from CD
[X] choose-mirror
4. Detect network hardware
Missing firmware files are: rt2680.bin Load? [X] No
5. Configure the network
enp0s4: Silicon Intergrated Systems [SiS] 190 Ethernet Adapter
wlp2s0: Ralink Corp: RT3090 Wireless 802.11n 1T/1R PCIe (wireless)
6. Choose enp0s4 as primary
7. Auto-configure networking? Yes
IPv6 + DHCP, set hostname and domain name.
8. Ctl-Alt-F3 to /dev/tty3
~ # route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 10.218.0.1 0.0.0.0 UG 0 0 0 enp0s4
10.218.0.0 * 255.255.255.0 U 0 0 0 enp0s4
9. ~ # ip address
...
3: enp0s4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 ...
link/ether 20:cf:30:10:43:fd brd ff:...
inet 10.218.0.100/24 scope global enp0s4
...
10. ~ # ping -c3 debian.proxad.net
PING debian.proxad.net (212.27.32.66): 56 data bytes
64 bytes from 212.27.32.66: seq=0 ttl=57 time=38.838 ms
...
3 packets transmitted, 3 packets received, 0% packet loss
11. Ctl-Alt-F5 Graphical install
Choose a mirror of the Debian archive
http, debian.proxad.net
12. Ctl-Alt-F4
Last line shows EeePC hung on
choose-mirror[4246]: DEBUG: command: wget --no-verbose
http://debian.proxad.net/debian/dists/stretch/Release -O - | grep -E
'^(Suite|Codename|Architectures):'
13. Ctl-Alt-F3 to /dev/tty3
ping ftp.fr.debian.org is successful, but
hangs on command wget --no-verbose
http://ftp.fr.debian.org/debian/dists/stretch/Release -O - | grep -E
'^(Suite|Codename|Architectures):'
14. I repeated 13 with more verbosity:
wget http://ftp.fr.debian.org/debian/dists/stretch/Release -O - | grep -E
'^(Suite|Codename|Architectures):'
--2018-02-18 20:50:31--
http://ftp.fr.debian.org/debian/dists/stretch/Release
Resolving ftp.fr.debian.org... 212.27.32.66, 2a01:e0c:1:1598::2
Connecting to ftp.fr.debian.org|212.27.32.66|:80... Connected
HTTP request sent, awaiting response
... 15 minutes go by ...
Read error (Connection timed out) in headers.
Retrying
It looks as if the network setup in the EeePC is correct, but wget fails.
Any suggestion would be very welcome, Roger
