On Tuesday 06 February 2018 05:42:53 Michelle Konzack wrote: > ######### Do not Cc: me, I am on THE LIST and I do not need > ########## ######### messages twice which make it very hard to > answer. ########## > > > Am DATE hackte AUTHOR in die Tasten: [email protected] > > > This is all? No "lo" stanza? Hm. > > it is: > > auto lo > iface lo inet loopback > > > In that case, it looks more or less correct. Issuing "ifup -a" > > should bring up your enp0s25 interface. Does it? > > Yes, it is up. > > The problem since Jessie is, that my PostgreSQL instances (I have 4) > and the nfs mounts plus VPN are ALWAYS started before the network and > exit with errors. > > I have to start ALL services by hand in order! > > If PostgreSQL can not start, then NO USER can log into the systenm! > > > But in this case it isn't clear what is triggering your DHCP > > client. > > I have already deinstalled the isc-dhcp-client. > > > Nothing else in some subdirectory /etc/network/interfaces.d? > > No. > > I have now moved the config for ethernet to > > /etc/network/interfaces.d/enp0s25 > > So the content of the files show > > ----[ /etc/network/interfaces > ]----------------------------------------- # This file describes the > network interfaces available on your system # and how to activate > them. For more information, see interfaces(5). > > source /etc/network/interfaces.d/* > > # The loopback network interface > auto lo > iface lo inet loopback > ---------------------------------------------------------------------- IF lack of a gateway "UG" entry in route -n is the problem, try this.
> ----[ /etc/network/interfaces.d/enp0s25 > ] > auto enp0s25 > iface enp0s25 inet static > address 192.168.0.202 > netmask 255.255.255.0 > gateway 192.168.0.1 > network 192.168.0.0 > > allow-hotplug enp0s25 ^^^^^^^^^^^^^^^^^^^^^ Doesn't the above line belong ABOVE the iface line? It has been in every example I've looked at. I am not using that line as its static, not dhcpd. I just went thru around 3 days of screwing around with a 'static' setup on an arm64 rockchip, could not get it to take a gateway assignment so I couldn't go anyplace out of my home network, until I added this last line to /etc/network/interfaces.d/eth0: up route add default gw 192.168.xx.1 The usual gw assignment seems to be broken in stretch, but now it works as shown by a route -n. And has continued to work over several reboots. [...] -- Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene>
