venkat wrote: > Mode2 : 1000Nits > Screen output is smudgy all time..
resolution? or how do you connect them to the machine - cable or power source? I don't have experience with 2 LVDS - how do you connect them - curious? LVDS is Low Voltage Differential Signalling output (typically a laptop LCD panel). Available properties: BACKLIGHT - current backlight level (adjustable) By adjusting the BACKLIGHT property, the brightness on the LVDS output can be adjusted. In some cases, this property may be unavailable (for example if your platform uses an external microcontroller to control the backlight). scaling mode - control LCD panel scaling mode When the currently selected display mode differs from the native panel resolution, various scaling options are available. These include Center Simply center the image on-screen without scaling. This is the only scaling mode that guarantees a one-to-one correspondence between native and displayed pixels, but some portions of the panel may be unused (so-called "letterboxing"). Full aspect Scale the image as much as possible while preserving aspect ratio. Pixels may not be displayed one-to-one (there may be some blurriness). Some portions of the panel may be unused if the aspect ratio of the selected mode does not match that of the panel. Full Scale the image to the panel size without regard to aspect ratio. This is the only mode which guarantees that every pixel of the panel will be used. But the displayed image may be distorted by stretching either horizontally or vertically, and pixels may not be displayed one-to-one (there may be some blurriness). The precise names of these options may differ depending on the kernel video driver, (but the functionality should be similar). See the output of xrandr --prop for a list of currently available scaling modes. http://linux.die.net/man/4/intel
