On Thu, 13 Nov 2003 13:26:22 -0500, Bill Benedetto <[EMAIL PROTECTED]> wrote in message <[EMAIL PROTECTED]>:
> >>> Rafael Quintanilla writes: > > Rafa> I recently installed debian from a Knoppix 3.3 > Rafa> catalan. The problem is that I want to have a 1024*768 > Rafa> resolution (BTW my monitor is a 15" SyncMaster 551S, > Rafa> samsung, with a recommeded refresh vertical rate of 85 > Rafa> Hz). I obtain only a 800x600 resolution (see attached > Rafa> file XF86Config-4_old.txt). ..lose the "vsync=85" bit, boot "knoppix screen=1024x768". > I just had an issue like this as well. I used the XF86Config-4 > file from Knoppix and couldn't get the resolution that I wanted. ... > In order to fix it, I just removed all of the ModeLine's and let > XFree86 do its work. > > I decided to remove them based on the XFree86-Video-Timings-HOWTO > which said: > > This HOWTO is effectively obsolete. Current (4.0.1 and up) versions > of XFree86 compute optimal modelines from the resolution you ..I beg to differ, I can afford to fry my card to find optimums, the damned thing can do 235MHz but is capped to 162MHz, and hangs 1/3 "out the left window". Yeah, a cooked 20"'er. > specify in the Modes section of your X configuration file. -- ..med vennlig hilsen = with Kind Regards from Arnt... ;-) ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
