Thanks Bob, I'll update /etc/smartd.conf as you recommended. The output currently looks ok:
*** ... === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED ... SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 173 173 033 Pre-fail Always - 2 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 464 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 068 068 000 Old_age Always - 14064 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 464 160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 51539607552 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 30 193 Load_Cycle_Count 0x0012 023 023 000 Old_age Always - 776233 194 Temperature_Celsius 0x0002 171 171 000 Old_age Always - 32 (Min/Max 16/48) 195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 20 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 14025 - # 2 Extended offline Completed without error 00% 14024 - *** fsck seems to run fine on boot too. It still seems like a big coincidence that the word airdrawndagger appeared there as this machine never in it's life saw that wifi. Although The smart TV it's connected to via HDMI did... Is it too paranoid to consider some kind of malware from another machine on the network? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/1434287.BRldXdCveZ@dragonfly
