Hello.
eth0 now is up after boot. I have resolved the configuration of the
isc-dhcp-server, it has needed 'INTERFACES="eth0"' in
'etc/default/dhcp3-server'.
But LAN still not works and the output of ethtool is the same as
before: ..., Speed: Unknown, Duplex: Unknown,..., Link detected: no.
Now i get in /var/log/syslog:
...
Nov 17 23:41:04 Venus kernel: [ 3114.982968] forcedeth 0000:00:14.0:
eth0: no link during initialization
Nov 17 23:41:04 Venus avahi-daemon[2937]: New relevant interface
eth0.IPv4 for mDNS.
Nov 17 23:41:04 Venus avahi-daemon[2937]: Registering new address
record for 192.168.0.1 on eth0.IPv4
Nov 17 23:41:04 Venus kernel: [ 3114.984643] ADDRCONF(NETDEV_UP): eth0:
link is not ready
Nov 17 23:41:04 Venus aspray[3900]: WARNING: Initialising interface
eth0 which does not have link
Nov 17 23:42:17 Venus dhcpd: Wrote 0 leases to leases file.
...
and this
:~# ip link
1: lo: ..
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN mode DEFAULT qlen 1000
link/ether 00:13:8f:6c:67:24 brd ff:ff:ff:ff:ff:ff
Anyone have a idea which could help ?
Bye
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/b0fae160d9cc1d1d429608a2dc6f5...@andaluciajunta.es
