Mon, 11 Aug 2014 05:44:18 +0000
Any tips on using SEM India DNA-A201 modem in bridge mode?
Modem has adsl and ppp commands. No man pages.
All attempts lead to dangling IP address (wan IP) reachable only from
localhost.
====
> adsl
Usage: adsl start [--up] [--mod <a|d|l|t|2|p|e|m>] [--lpair <(i)nner|(o)uter>]
[--trellis <on|off>] [--snr <snrQ4>] [--bitswap <on|off>]
[--sesdrop <on|off>] [--sra <on|off>]
[--CoMinMgn <on|off>] [--i24k <on|off>] [--phyReXmt <on|off>]
adsl stop
adsl connection [--up] [--down] [--loopback] [--reverb]
[--medley] [--noretrain] [--L3] [--diagmode] [--L0]
[--tones]
adsl configure [--mod <a|d|l|t|2|p|e|madsl>] [--lpair <(i)nner|(o)uter>]
[--trellis <on|off>] [--snr <snrQ4>] [--bitswap <on|off>]
[--sesdrop <on|off>] [--sra <on|off>]
[--CoMinMgn <on|off>] [--i24k <on|off>] [--phyReXmt <on|off>]
bert [--start <#seconds>] [--stop] [--show]
adsl afelb [--time <sec>] [--tones] [--signal <1/2/8>]
adsl qlnmntr [--time <sec>] [--freq <msec>]
adsl inm [--start <BB_THRESH 10*dB> <INMAITO> <INMIATS>]
[--stop] [--show]
adsl nlnm [--show ] [--setThld <Thld_Num_Tones>]
adsl diag [--logstart <nBytes>] [--logpause] [--logstop]
[--loguntilbufferfull <nBytes>] [--loguntilretrain <nBytes>]
adsl info [--state] [--show] [--stats] [--SNR] [--QLN] [--Hlog]
[--Hlin] [--HlinS] [--Bits]
[--linediag] [--reset] [--vendor] [--cfg]
adsl --version
adsl --help
====
> ppp
Usage: ppp config <port.vpi.vci> [<connection id>] <up|down>
ppp --help
connect or disconnect ppp
====
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/CALM+MZQt6mQMNTyP31xTCS+APMZ6OGY9EwJ92est9=+2y5g...@mail.gmail.com
