On 28/04/14 08:13 PM, Miles Fidelman wrote: > Well, > > My personal experience with WD drives is that Raw_Read_Error_Rate is the > best indicator of drive degradation. In your case, it's 0, which is fine. > >> UPDATED WHEN_FAILED RAW_VALUE >> 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always >> - 0 > > But...... It looks like your drive has never actually run any tests: >> SMART Self-test log structure revision number 1 >> No self-tests have been logged. [To run self-tests, use: smartctl -t] >> Good catch. I had noticed that SMART monitoring was not enabled when I was upgrading the BIOS on this box - so it was enabled just today. > > Looks to me like the first thing you have to do is actually RUN some tests. > > Try: > - smartctl -s on -A /dev/<whatever> > > > Miles Fidelman >
Thanks. Will get it running right away. KS -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/[email protected]
