Wow a p3 laptop.... can't remember the last time I've seen one those
at all, let along in a full working state. And here I was thinking I
was an old fart with my core2duo laptop :)

I do have to say though its amazing the extra life Linux and
especially debian imo can give an old machine. A very minimal install
+ only essential packages and you can really get things running quick
even on limited resources.

chris

On 1/31/14, Scott Ferguson <scott.ferguson.debian.u...@gmail.com> wrote:
> On 31/01/14 16:31, Robert Crawford wrote:
>> My laptop is a Toshiba Satellite 2400-S251 with Super Savage Video chip.
>> It does have pae built in. 30 gb hd and 512 mb ram.
>>
>> Ubuntu above 12.04.3 has issues with the Savage video chip. Also it
>> won't boot from USB drive.
>
> <gently>
> Debian != Ubuntu
>
> Just warning you that there are significant differences.
>
>>
>> This what worked.,
> <snipped>
>
> This "just works" for me:-
> # apt-get install xserver-xorg-video-savage
>
> Thinkpad T22 w. 512MB of RAM, happily running minimal KDE (on a trimmed
> Debian Wheezy)
>
> $ lspci | grep -i vga
> 01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 13)
> # dmidecode | grep -i 'vendor\|family\|max speed\|maximum total'
>         Vendor: IBM
>         Family: Pentium III
>         Signature: Type 0, Family 6, Model 8, Stepping 10
>         Max Speed: 900 MHz
>
>
> from /var/log/Xorg.0.log:-
> [    49.791] (==) Matched savage as autoconfigured driver 0
> [    49.791] (II) LoadModule: "savage"
> [    49.804] (II) Loading /usr/lib/xorg/modules/drivers/savage_drv.so
> [    49.840] (II) Module savage: vendor="X.Org Foundation"
> [    49.877] (II) SAVAGE: driver (version 2.3.4) for S3 Savage chipsets:
> Savage4,
>         Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
>         Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
>         Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX
> 64,
>         SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
>         SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
>         SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
> [    49.911] (II) SAVAGE(0): Creating default Display subsection in
> Screen section
> [    49.911] (==) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
> [    49.911] (==) SAVAGE(0): RGB weight 565
> [    49.911] (==) SAVAGE(0): Default visual is TrueColor
> [    49.911] (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
> [    49.911] (==) SAVAGE(0): Using XAA acceleration architecture
> [    49.911] (==) SAVAGE(0): Using HW cursor
> [    49.911] (==) SAVAGE(0): Using video BIOS to set modes
> [    49.947] (II) SAVAGE(0): initializing int10
> [    49.955] (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
> [    49.956] (II) SAVAGE(0): VESA BIOS detected
> [    49.956] (II) SAVAGE(0): VESA VBE Version 2.0
> [    49.956] (II) SAVAGE(0): VESA VBE Total Mem: 8192 kB
> [    49.957] (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. M7 BIOS
> [    49.957] (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
> [    49.957] (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
> [    49.957] (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
> [    49.957] (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1
> [    49.957] (--) SAVAGE(0): Chip: id 8c12, "Savage/IX-MV"
> [    49.957] (--) SAVAGE(0): Engine: "MobileSavage"
> [    49.957] (--) SAVAGE(0): AGP card detected
> [    49.957] (==) SAVAGE(0): Using AGP DMA
> [    49.958] (II) SAVAGE(0): Savage3D/MX/IX does not support command DMA.
> [    49.958] (==) SAVAGE(0): Will try only vertex DMA mode
> [    49.958] (==) SAVAGE(0): Using AGP 1x mode
> [    49.958] (==) SAVAGE(0): Using 16 MB AGP aperture
> [    49.967] (==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
> [    49.967] (--) SAVAGE(0): probed videoram:  8192k
> [    51.396] (--) SAVAGE(0): 1024x768 TFT LCD panel detected and active
> [    51.396] (--) SAVAGE(0): - Limiting video mode to 1024x768
> [    51.463] (--) SAVAGE(0): Found 13 modes at this depth:
> [    51.464] (II) SAVAGE(0): <default monitor>: Using hsync range of
> 31.50-47.82 kHz
> [    51.464] (II) SAVAGE(0): <default monitor>: Using vrefresh range of
> 56.00-59.92 Hz
> [    51.464] (II) SAVAGE(0): <default monitor>: Using maximum pixel
> clock of 63.50 MHz
> [    51.464] (II) SAVAGE(0): Estimated virtual size for aspect ratio
> 1.3333 is 1024x768
> [    51.464] (II) SAVAGE(0): Clock range:  10.00 to 250.00 MHz
> etc...
>
> See:-
> http://www.thinkwiki.org/wiki/S3_Savage_IX8
> http://man.flashnux.com/en/debian/6/6.0.1/man4/savage.4.html
>
>
> Kind regards
>
>
> --
> To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmas...@lists.debian.org
> Archive: http://lists.debian.org/52eb45f6.5020...@gmail.com
>
>


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/caknnfz_08tqvbqibj3+urg16f9sw_fxaqjjp2phxv-fueeq...@mail.gmail.com

Reply via email to