On 25 December 2013 11:30, Sietse Achterop <s.achte...@rug.nl> wrote:
> Dear List, > > Using Wheezy, version 7.3, with the 3.11 kernel from wheezy-backports, > I have an exteral USB sound device from Sweex, see > http://www.sweex.com/nl/assortiment/sound-vision/sound-cards/sc016/ > > lsusb says: > Bus 003 Device 004: ID 0d8c:0102 C-Media Electronics, Inc. CM106 Like > Sound Device > This hardware seems OK, because under Windows it is working properly. > > The problem is that no signal is seen from the line-in input. > The microphone input (and output) work ok. > I can set the settings from System Settings->Sound. > The microphone-led on the device shows that the setting is changed on the > device. > (I am using pulseaudio, so it can also use pavucontrol) > > The question of course is, why are signals on line-in not seen? > What could wrong? > > Thanks in advance, > Sietse > > > As a start from a terminal run alsamixer, hit F6 to select device and check the line-in level. -- *rob*
