Beco wrote: > Bob Proulx wrote: > > First verify your sources.list file. I didn't see where you said what > > version of Debian you were using. Stable Wheezy, Testing Jessie, or > > Unstable Sid. Whatever. Make sure it is consistent.
I should have asked, can you post your sources.list file? I see in your message that you are running Wheezy 7. (But I can't say Stable since you have added many destabilizing things.) > > $ apt-show-versions | grep -v uptodate > > Nice command. It shows me I still have "squeeze" on my system. Unless you have cleaned then old libs may still be hanging around and they will only be used by the old Squeeze part of the system. Probably need to do some cleaning. The 'apt-get autoremove' tool is a good start for it. I also like 'deborphan'. > I'm not quite sure what to do with this response: > > # apt-show-versions | grep -v uptodate > > deb-multimedia-keyring 2012.05.10-dmo3 newer than version in archive > live-initramfs 2.0.15-1 newer than version in archive > vlc-nox/wheezy upgradeable from 2.0.3-5 to 1:2.0.1-0.6 Ah, yes, there is the problem. You see that the Merillat version has an epoch on the front. The "1:" part. That makes version 1:2.0.1-0.6 newer than 2.0.3-5. But not just that single package. This will be similar across many packages. But it shows the root of the problem. And it is why people have become annoyed that he is doing this. It creates problems for people such as yourself that trip into the pitfall and then have to dig out of it. Meanwhile the work he has done has helped many people for years. I still use some of the his packages and am grateful that they are there. And so I have mixed feelings about it. > libisc62 1:9.7.3.dfsg-1~squeeze8 installed: No available version in archive > libisccc60 1:9.7.3.dfsg-1~squeeze8 installed: No available version in archive These are good examples of old orphaned libraries. Nothing is using them anymore. They can be purged from the system. They don't really hurt anything being there. But they are lint and they confuse the issue so I would purge them. Using deborphan (try 'orphaner') is good to find things like those and clean them out. > skype 4.2.0.11-1 installed: No available version in archive This is an example of something that is never going to be in the free archive because it is a nonfree component that you have manually installed. If you want it then that is just the way things are going to be. > mplayer is uninstalled for now. The only problem I see is vlc. > > # apt-cache policy vlc-nox > vlc-nox: > Installed: 2.0.3-5 > Candidate: 1:2.0.1-0.6 > Version table: > 1:2.0.1-0.6 0 > 500 http://www.las.ic.unicamp.br/pub/debian-multimedia/ wheezy/main > amd64 Packages > *** 2.0.3-5 0 > 500 http://ftp.br.debian.org/debian/ wheezy/main amd64 Packages > 100 /var/lib/dpkg/status The epoch is why it is trying to install from the Merillat archive. Basically you need to make a choice. Politics between Debian and Merillat have gotten to the point that you really need to decide which camp you are in. Debian has gone the libav route. Merillat has gone the ffmpeg route. You need to decide which you want. If you want to use the Merillat sources then you need to take this problem and anything like it there. If you want to go the Debian sources then you need to remove the Merillat archive and go back to Debian. Or you need to learn how to deal with the problem somehow. But certainly the Debian multimedia developers are not happy about the situation for exactly the problems you have found. They don't want to clean up someone else's mess. I can't blame them. Look at how you were sucked into having this problem! The ffmpeg v. libav problem isn't entirely clear cut to the outsider. I am an outsider. But from what I have read I wish Debian had gone the ffmpeg route. (Can't we all just get along?) But they didn't. So to make my life easier for better or worse I have stuck with the Debian packaging of libav. Which means that while I am using some things from Merillat the multimedia components that depend upon these are not any of them. And so I recommend that you remove the Merillat sources from your sources.list file. Then get your system back into a sane state. I am not saying never use a Merillat package. I am just saying that to get your system cleaned up that you should remove the sources.list and remove all of the packages from there in order to get things back into a sane state. After that then you could selectively pick and choose and probably be okay. But fix your system first. Make sense? > Now this command won't work: > > # apt-get install vlc-nox=1:2.0.1-0.6 That version will force an install from the Merillat archive. And therefore by dependency any problems you have should be taken up with his archive and not Debian's. > The following packages have unmet dependencies: > vlc-nox : Depends: libcdio10 but it is not installable > Depends: libiso9660-7 but it is not installable > Depends: libupnp3 (>= 1.4.3) but it is not installable > E: Unable to correct problems, you have held broken packages. Something broken in the Merillat archive. Or in the configuration of your use of it. But neither of those are Debian. > And now I'm afraid to boot because of this error: > > # apt-get install live-initramfs What is live-initramfs? $ apt-cache show live-initramfs N: Unable to locate package live-initramfs E: No packages found Not a Debian package. > Unpacking live-initramfs (from .../live-initramfs_1.236.2-1_all.deb) ... > dpkg: error processing > /var/cache/apt/archives/live-initramfs_1.236.2-1_all.deb (--unpack): > trying to overwrite '/usr/share/initramfs-tools/hooks/live', which is > also in package live-boot-initramfs-tools 3.0.1-1 Buggy package! Includes files owned by another package. Bad package. No biscuit. > dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) > Processing triggers for initramfs-tools ... > update-initramfs: Generating /boot/initrd.img-3.2.0-4-amd64 > live-boot: core filesystems devices utils memdisk udev wget blockdev. > Errors were encountered while processing: > /var/cache/apt/archives/live-initramfs_1.236.2-1_all.deb > E: Sub-process /usr/bin/dpkg returned an error code (1) I doubt that it actually updated the initrd. What date is on your initrd file? ls -ld /boot/initrd* I bet it will be older and that will show that it was not updated by the above. > Is this ok to boot yet? Or do I need to do something urgent before > attempt to boot? I think you are probably okay. No guarantees though! Your system is generally a little messed up right now. Make sure you have a Debian install disk. The netinst disk is fine. It can be used as a rescue system. I posted this recently about how to use the rescue mode. *IF* you need it. Probably won't need it. But if you do then you can rescue your system. https://lists.debian.org/debian-user/2013/01/msg00218.html Back to solving your problem. I would remove all of the sources except for official debian ones. Here are generic ones using the redirector to automatically select a close up to date mirror for you. deb http://http.debian.org/debian wheezy main contrib non-free deb http://http.debian.org/debian wheezy-updates main contrib non-free deb http://security.debian.org/ wheezy/updates main contrib non-free Then using only those sources I would figure out how to use pinning to force your system back to stable. I _think_ this will do it. Untested! And I am not a pinning expert so if anyone else sees a problem with this and suggests something different that is better. man apt_preferences P >= 1000 causes a version to be installed even if this constitutes a downgrade of the package File /etc/apt/preferences: Package: * Pin: release a=stable Pin-Priority: 1001 Then 'apt-get update' and then 'apt-get upgrade' and then 'apt-get dist-upgrade'. I think that should pull everything back to wheezy stable. This may require some more debugging and problem solving along the way. After getting your system back to a sane state then remove that /etc/apt/preferences file and get back to a normal system. Make sense? Hopefully. Good luck! Please report back on your progress so that we (I!) can learn from it! Bob
signature.asc
Description: Digital signature
