Tom H wrote:
On Fri, Oct 18, 2013 at 12:35 PM, Miles Fidelman
<[email protected]> wrote:
Steffen Dettmer wrote:
I'd like to configure multiple IP addresses to a VLAN tagged interface. I
tried
auto eth3.107
iface eth3.77 inet static
address 10.0.5.15
netmask 255.255.255.0
iface eth3.77 inet static
address 10.0.5.16
netmask 255.255.255.0
but I get an error message that ifup tries to configure the VLAN
interface twice, but the addresses are set.
for what it's worth, my (working, for years) /etc/network/interfaces file
looks like this:
auto lo eth0 eth0:1 eth0:2 eth0:3 eth0:4 eth0:5 eth0:6 eth0:7 eth0:8 eth0:9
eth0
:10 eth0:11 eth0:12 eth0:13 eth0:14 eth0:15
iface eth0 inet static
address 207.154.13.48
netmask 255.255.255.224
network 207.154.13.32
broadcast 207.154.13.63
gateway 207.154.13.33
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 209.59.0.18 209.59.0.2
dns-search neighborhoods.net
iface eth0:1 inet static
address 207.154.13.49
netmask 255.255.255.224
broadcast 207.154.13.63
eth0:1 is an alias.
ummm... no, eth0:1 is a virtual interface riding on top of a physical
one (eth0 being the physical interface).
--
In theory, there is no difference between theory and practice.
In practice, there is. .... Yogi Berra
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
Archive: http://lists.debian.org/[email protected]
