i have a HP Deskjet 1000 J110 series which is seen by lsusb and configured using cups - no problem. It is shown in lsusb as - Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 15d9:0a4f Trust International B.V. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 014: ID 0fce:6180 Sony Ericsson Mobile Communications AB Bus 004 Device 013: ID 03f0:8811 Hewlett-Packard Bus 004 Device 004: ID 1bcf:0c31 Sunplus Innovation Technology Inc. SPIF30x Serial-ATA bridge Bus 004 Device 002: ID 0411:01ea BUFFALO INC. (formerly MelCo., Inc.) Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1a2c:0c21 China Resource Semico Co., Ltd Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I also have a HP Deskjet 1050A All-in-One Printer which is NOT seen by lsusb. what can i do to make it be seen please? hp say it is debian-compatible. it is not shown in lsusb as - Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 15d9:0a4f Trust International B.V. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 014: ID 0fce:6180 Sony Ericsson Mobile Communications AB Bus 004 Device 004: ID 1bcf:0c31 Sunplus Innovation Technology Inc. SPIF30x Serial-ATA bridge Bus 004 Device 002: ID 0411:01ea BUFFALO INC. (formerly MelCo., Inc.) Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1a2c:0c21 China Resource Semico Co., Ltd Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub I've run 'hp-setup -i' as root and it fails to find any device at all for a printer. Can anyone suggest some way of getting this new printer to work under debian testing please? Thanks Sharon. -- A taste of linux = http://www.sharons.org.uk/index.html efever = http://www.efever.blogspot.com/ efever = http://sharon04.livejournal.com/ Debian testing, Fluxbox 1.3.5, LibreOffice 4.0.3.3, Registered Linux user 334501
