And good time of day to you, Sthu. On Thursday, January 24, 2013 23:55, "Sthu Deus" <sthu.d...@gmail.com> said:
> Good time of the day, Craig. > > If You want to set Your own rules, You can write it to a file where You > want to hold it, then You can put a script w/ execution bit set in > > /etc/network/if-pre-up.d > > that will read those files. > > As soon as the interface comes up, Your rules will come up too (in case > it is correct - otherwise the defaults will be used). > > > Sthu. I'm afraid I wasn't clear in what I was asking for. I am fairly familiar with iptables and how to enable my own rules at start up. I am just curious to know where the existing rules came from. Something I installed created a set of rules for the virtual network, and I would like to know what caused that and what causes them to be enabled. $ sudo iptables -L -n --line-numbers Chain INPUT (policy ACCEPT) num target prot opt source destination 1 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53 2 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 3 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67 4 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:67 Chain FORWARD (policy ACCEPT) num target prot opt source destination 1 ACCEPT all -- 0.0.0.0/0 192.168.221.0/24 state RELATED,ESTABLISHED 2 ACCEPT all -- 192.168.221.0/24 0.0.0.0/0 3 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 4 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 5 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) num target prot opt source destination Thanks, Craig Sent - Gtek Web Mail -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1359120356.51796...@webmail.gtek.biz
