On Mon, 2012-12-10 at 17:25 -0600, John Hasler wrote: > Mark writes: > > Any ideas guys? > > You may find that pressing down or prying up on that part of the board > works as well as does the dryer. Inspect the suspicious area of the > MOBO carefully with a magnifying glass and then fix the crack or bad > solder joint.
+1 Use a chopstick to press. The OP should be experienced with soldering multi-layer boards. Surface-mounted device aren't an issue, but solder joints might be plated-through by vias http://upload.wikimedia.org/wikipedia/commons/thumb/5/57/Via_Types.svg/220px-Via_Types.svg.png . Without experiences the vias can lose their connections. Hth, Ralf -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1355350976.2651.23.camel@q
