On Tue, Dec 4, 2012 at 7:14 PM, John Anderson <j...@janderson.org.uk> wrote:
> On 04/12/12 13:48, Leonid Korostyshevski uttered these pearls of wisdom:: > > > > > > Leonid Korostyshevski <korostyshevski.deb <at> gmail.com > > <http://gmail.com>> writes: > > > > > > > > > > > On Thu, Feb 2, 2012 at 1:46 PM, Bob <spam <at> homeurl.co.uk > > <http://homeurl.co.uk>> wrote: > > > On 02/01/2012 03:48 PM, Leonid Korostyshevski wrote: > > > Hello, list! > > > Have installed Wheezy weekly build 30-01-2012 but cannot log into a > > > fresh system: there is just a noise on a screen instead of a logon > > > screen. Cannot escape to text console, Ctrl+Alt+F1...Fn does not > > works. > > > Ctrl+Alt+PrtScr+B works, though. Also, IMHO it is a good idea to > > enable > > > Ctrl+Alt+Backspace for "testing" distro. > > > Not sure about "recovery" mode naming as a GRUB2 entry. It leads > > to the > > > same noise on screen, not to safe plain VGA CLI environment, as it > > > suppose to be IMHO. "Testing" shouldn't be "stuck with" IMHO :0) > > > Hardware in use - netbook on AMD Brazos (C-60 + ATI 6250). No > > 'lspci' at > > > the moment, sorry. During installation process, 3.1.x.-486 kernel > was > > > chosen. > > > Would you, please, to give an advice how to override Xorg fault? > > > Thanks a lot! > > > LK > > > > > > Hello, list! > > > > After ten month of awaiting, recently have tried to install Wheezy again > > at Acer Aspire One 522 netbook. This time, lspci output is here, took > > from LiveCD Kubuntu 12.10. > > > > $ sudo lspci -knn > > 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 14h > > Processor Root Complex [1022:1510] > > Subsystem: Acer Incorporated [ALI] Device [1025:0543] > > 00:01.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] > > nee ATI Wrestler [Radeon HD 6290] [1002:9807] > > Subsystem: Acer Incorporated [ALI] Device [1025:0543] > > Kernel driver in use: radeon > > Kernel modules: radeon > > 00:01.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI > > Wrestler HDMI Audio [Radeon HD 6250/6310] [1002:1314] > > Subsystem: Acer Incorporated [ALI] Device [1025:0543] > > Kernel driver in use: snd_hda_intel > > Kernel modules: snd-hda-intel > > 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI > > SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] > > Subsystem: Acer Incorporated [ALI] Device [1025:0543] > > Kernel driver in use: ahci > > 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI > > SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] > > Subsystem: Acer Incorporated [ALI] Device [1025:0543] > > Kernel driver in use: ohci_hcd > > 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI > > SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] > > Subsystem: Acer Incorporated [ALI] Device [1025:0543] > > Kernel driver in use: ehci_hcd > > 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI > > SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] > > Subsystem: Acer Incorporated [ALI] Device [1025:0543] > > Kernel driver in use: ohci_hcd > > 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI > > SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] > > Subsystem: Acer Incorporated [ALI] Device [1025:0543] > > Kernel driver in use: ehci_hcd > > 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus > > Controller [1002:4385] (rev 42) > > Subsystem: Acer Incorporated [ALI] Device [1025:0543] > > Kernel driver in use: piix4_smbus > > Kernel modules: sp5100_tco, i2c-piix4 > > 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 > > Azalia (Intel HDA) [1002:4383] (rev 40) > > Subsystem: Acer Incorporated [ALI] Device [1025:0543] > > Kernel driver in use: snd_hda_intel > > Kernel modules: snd-hda-intel > > 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI > > SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40) > > Subsystem: Acer Incorporated [ALI] Device [1025:0543] > > 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 > > PCI to PCI Bridge [1002:4384] (rev 40) > > 00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI > > SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] > > Kernel driver in use: pcieport > > Kernel modules: shpchp > > 00:15.2 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB900 > > PCI to PCI bridge (PCIE port 2) [1002:43a2] > > Kernel driver in use: pcieport > > Kernel modules: shpchp > > 00:15.3 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB900 > > PCI to PCI bridge (PCIE port 3) [1002:43a3] > > Kernel driver in use: pcieport > > Kernel modules: shpchp > > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h > > Processor Function 0 [1022:1700] (rev 43) > > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h > > Processor Function 1 [1022:1701] > > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h > > Processor Function 2 [1022:1702] > > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h > > Processor Function 3 [1022:1703] > > Kernel driver in use: k10temp > > Kernel modules: k10temp > > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h > > Processor Function 4 [1022:1704] > > 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h > > Processor Function 6 [1022:1718] > > 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h > > Processor Function 5 [1022:1716] > > 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h > > Processor Function 7 [1022:1719] > > 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8152 > > v2.0 Fast Ethernet [1969:2062] (rev c1) > > Subsystem: Acer Incorporated [ALI] Device [1025:0543] > > Kernel driver in use: atl1c > > Kernel modules: atl1c > > 07:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 > > Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) > > Subsystem: Lite-On Communications Inc Device [11ad:6631] > > Kernel driver in use: ath9k > > Kernel modules: ath9k > > > > Wheezy have performed a good install without problems (kde4 flavor, > > graphic expert mode, network installation through wpa2 wifi) but after > > restart there is the same picture as a ten months earlier. You may see > > two attached shots of a netbook screen. > > Probably, the failure may be fixed by a conf file editing, or something, > > but the “recovery mode” is demonstrating almost the same picture as a > > “normal” mode. And at the same time, as mentioned above, the install > > itself was made through a “graphic install”. lspci from running Kubuntu > > 12.10 fairly demonstrate 'radeon' driver, which is working with APU C-60 > > AMD ATI 6590 well, both in “live” and “permanent install” modes. > > Rusty English is a bad of mine, so I consider my misunderstanding of the > > words “recovery mode” in Wheezy boot menu as a lost in translation. > > > > Also, have tried Wheezy livecd (from here: > > http://live.debian.net/cdimage/release/current-next/amd64/iso-hybrid/) > > with the same “noisy screen effect” after boot. > > At the same time, CrunchBang Waldorf is running fine in the live mode. > > It is Wheezy-based, right? > > > > If somebody may give an advice, how to fix my AMD ATI APU problem, > > please? I have tried to use Debian bug tracking system to report a bug > > but have not succeeded yet in ecosystem understanding. > > > > Thanks in advance! > > LK > > My similar problem was solved by enabling the non-free repository and > installing the "firmware-linux-nonfree". I think your graphic chip needs > this same firmware to function. > > Regards > John Anderson > > -- > Yesterday is history, tomorrow is a mystery but today is a gift - that > is why it is called the present > Thanks for the answer! Is there a "howto" which describes a process of installing something into a system, which is installed already? I know how to modify a sources.list but that's it. WBR, LK
