On Sat, 1 Dec 2012 14:19:50 +0000 Roger Leigh <rle...@codelibre.net> wrote:
<snip> > Just make sure that the date is set correctly (run "date" and set it > with "date --set="newdate" if it's wrong). Then run > hwclock --utc --systohc > to set the hardware clock from the system clock in UTC. Look at > /etc/adjtime and you should see UTC on the third line. Use --local > in place of --utc, and it switches it back to LOCAL. I'd definitely > recommend using UTC though. > > </snip> > Regards, > Roger > I have saved your full email as a future reference and it will be a good reference for those who are suffering with the same confusion as mine, before reading your email. Many many thanks for your contribution. I have checked my /etc/adjtime and found [.....] -0.408399 1354206971 0.000000 1354206971 UTC [......] So my system is following the UTC :-) And also set the H/W clock to UTC with "hwclock --utc --systohc" still my H/W clock shows local timezone !!! How can I keep the H/W to UTC then and how can I apply different timezone to different login user ? say someone use german and another different login user use uk timezone. dpkg-reconfigure sure change the H/W timezone to UTC, but also changes local. Once again thanks for your excellent clarifications. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20121203121006.40ff9...@shiva.selfip.org
