Ramon Hofer <ramonhofer <at> bluewin.ch> writes:

> 
> On Thu, 05 Jan 2012 08:38:05 -0500, Celejar wrote:
> 
> > On Thu, 5 Jan 2012 00:32:02 +0000 (UTC) Ramon Hofer
> > <ramonhofer <at> bluewin.ch> wrote:
> > 
> >> I'm using Squeeze with 2.6.32-5-686 and I'm trying to configure my
> >> Thinkpad X61s to act as WLAN Access Point. It has an Intel 4965
> >> chipset:
> >> 
> >> # lspci
> >> 03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or
> >> AGN [Kedron] Network Connection (rev 61)
> > 
> > ...
> > 
> >> Maybe the controller can't be used in master mode? Here's the output of
> >> # iw phy phy0 info
> >> http://pastebin.com/LCbYFghh
> >> 
> >> It says on lines 20ff:
> >>    Supported interface modes:
> >>             * IBSS
> >>             * managed
> >>             * monitor
> >> 
> >> As far as I understand this is a problem as there should also be master
> >> listed?
> > 
> > According to Wikipedia, the iwlwifi drivers indeed do not support master
> > mode:
> > 
> > http://en.wikipedia.org/wiki/Comparison_of_open-Now the wiki tell that
iwlwifi support Master Mode: 

http://en.wikipedia.org/wiki/Comparison_of_open-source_wireless_drivers

but I try and it seems to not work 
------------------------
iw phy phy0 info | less
....
        Supported interface modes:
                 * IBSS
                 * managed
                 * monitor
        software interface modes (can always be added):
                 * monitor
.....


------------------------

even if the output of iw command show something about 
AP and AP/VLAN for TX and RX frames:

        Supported TX frame types:
                 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 ....
                 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0....
                 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 ....
                 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0....
                 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x....
                 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x...
                 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60..
        Supported RX frame types:
                 * IBSS: 0xb0 0xc0 0xd0
                 * managed: 0x40 0xd0
                 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * mesh point: 0xb0 0xc0 0xd0
                 * P2P-client: 0x40 0xd0
                 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0



using the last firmware available for iwlwifi:

# modinfo iwl4965
filename:      
/lib/modules/3.6-6.slh.3-aptosid-amd64/kernel/drivers/net/wirel
ess/iwlegacy/iwl4965.ko
firmware:       iwlwifi-4965-2.ucode
alias:          iwl4965
license:        GPL
author:         Copyright(c) 2003-2011 Intel Corporation <i...@linux.intel.com>
version:        in-tree:
description:    Intel(R) Wireless WiFi 4965 driver for Linux
srcversion:     5ACB01E1C39795670D74138
alias:          pci:v00008086d00004230sv*sd*bc*sc*i*
alias:          pci:v00008086d00004229sv*sd*bc*sc*i*
depends:        iwlegacy,cfg80211,mac80211
intree:         Y
vermagic:       3.6-6.slh.3-aptosid-amd64 SMP preempt mod_unload modversions 
parm:           swcrypto:using crypto in software (default 0 [hardware]) (int)
parm:           queues_num:number of hw queues. (int)
parm:           11n_disable:disable 11n functionality (int)
parm:           amsdu_size_8K:enable 8K amsdu size (int)
parm:           fw_restart:restart firmware in case of error (int)


there is someone who know why? and how to activate the AP or AP/VLAN mode? 

regards

Massimo





> source_wireless_drivers#Driver_capabilities
> > 
> > :( My T61 also has that card ...
> 
> That's too bad 
> 
> But I was able to use my old Thinkpad T43 as a AP 
> 
> Regards
> Ramon
> 





-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/loom.20121114t182839...@post.gmane.org

Reply via email to