Dear Gurus, I have copied over my home directory to a new drive which is a raid 1 software raid. I added the corresponding correct information to /etc/mdadm/mdadm.conf.
ARRAY /dev/md1 level=raid1 num-devices=1 UUID=69547109-c527-6986-fab9-5ff707241177 and i replaced the old drive entry in /etc/fstab with the new information /dev/md1 /home ext3 defaults 0 2 however the boot from grub fails and drops me into a partial state because the device /dev/md1 is not existent. I can manually create mknod /dev/md1 b 9 1 and then mdadm -A /dev/md1 and then mount it but this is clearly wrong. What do I do to enable my system to boot normally with this new configuration?? ie what tells the boot process to create /dev/md1 and assemble the raid? thanks Mitchell -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
