On Thu, Jul 26, 2012 at 1:37 PM, Doug <[email protected]> wrote: > On 07/26/2012 12:58 AM, lina wrote: >> >> Hi, >> >> I have a SanDisk 16GB card >> >> (http://www.play.com/Electronics/Electronics/-/3184/2451/-/30026998/SanDisk-Ultra-16GB-SDHC-Memory-Card/Product.html), >> >> once insert it into the slot, it showed me: >> >> Jul 26 12:41:47 debian kernel: [94880.765117] mmc0: Resetting controller. >> Jul 26 12:41:47 debian kernel: [94880.783153] mmc0: Card removed >> during transfer! >> Jul 26 12:41:47 debian kernel: [94880.783163] mmc0: Resetting controller. >> Jul 26 12:41:47 debian kernel: [94880.787329] mmc0: error -123 whilst >> initialising SD card >> Jul 26 12:42:31 debian kernel: [94924.588304] sdhci: Switching to 1.8V >> signalling voltage failed, retrying with S18R set to 0 >> Jul 26 12:42:39 debian kernel: [94932.607544] mmc0: error -110 whilst >> initialising SD card >> Jul 26 12:42:48 debian kernel: [94941.003529] mmc0: error -110 whilst >> initialising SD card >> Jul 26 12:42:48 debian kernel: [94941.831354] sdhci: Switching to 1.8V >> signalling voltage failed, retrying with S18R set to 0 >> Jul 26 12:42:56 debian kernel: [94949.919027] mmc0: error -110 whilst >> initialising SD card >> Jul 26 12:43:13 debian kernel: [94966.303499] mmc0: error -110 whilst >> initialising SD card >> >> dmesg results showed me: >> [94880.783163] mmc0: Resetting controller. >> [94880.787329] mmc0: error -123 whilst initialising SD card >> [94924.588304] sdhci: Switching to 1.8V signalling voltage failed, >> retrying with S18R set to 0 >> [94932.607544] mmc0: error -110 whilst initialising SD card >> [94941.003529] mmc0: error -110 whilst initialising SD card >> [94941.831354] sdhci: Switching to 1.8V signalling voltage failed, >> retrying with S18R set to 0 >> [94949.919027] mmc0: error -110 whilst initialising SD card >> [94966.303499] mmc0: error -110 whilst initialising SD card >> >> >> The card is healthy, I have a USB card reader, so no problem, >> >> [95739.464470] usb 2-1.2: new full-speed USB device number 6 using >> ehci_hcd >> [95739.480565] hub 2-1:1.0: unable to enumerate USB device on port 2 >> [95739.720215] usb 2-1.2: new high-speed USB device number 7 using >> ehci_hcd >> [95739.813751] usb 2-1.2: New USB device found, idVendor=14cd, >> idProduct=125c >> [95739.813761] usb 2-1.2: New USB device strings: Mfr=1, Product=3, >> SerialNumber=2 >> [95739.813767] usb 2-1.2: Product: Mass Storage Device >> [95739.813772] usb 2-1.2: Manufacturer: Generic >> [95739.813776] usb 2-1.2: SerialNumber: 125C20100726 >> [95739.814603] scsi4 : usb-storage 2-1.2:1.0 >> [95740.812191] scsi 4:0:0:0: Direct-Access Mass Storage Device >> PQ: 0 ANSI: 0 CCS >> [95740.816024] sd 4:0:0:0: [sdb] 31116288 512-byte logical blocks: >> (15.9 GB/14.8 GiB) >> [95740.816702] sd 4:0:0:0: [sdb] Write Protect is off >> [95740.816712] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 >> [95740.817368] sd 4:0:0:0: [sdb] No Caching mode page present >> [95740.817381] sd 4:0:0:0: [sdb] Assuming drive cache: write through >> [95740.820973] sd 4:0:0:0: [sdb] No Caching mode page present >> [95740.820985] sd 4:0:0:0: [sdb] Assuming drive cache: write through >> [95740.822154] sdb: sdb1 >> [95740.824325] sd 4:0:0:0: [sdb] No Caching mode page present >> [95740.824328] sd 4:0:0:0: [sdb] Assuming drive cache: write through >> [95740.824330] sd 4:0:0:0: [sdb] Attached SCSI removable disk >> >> >> I wonder, is it possible to read without the card reader. >> >> Thanks with best regards, >> >> > You can get an external card reading adapter that plugs into a > usb port. I have one called "TOPRAM. I don't remember where I got it, > but there are probably a slew of them available, At any rate, it works > great. I took some pictures of my dog with a Panasonic Lumix camera, > put the SD card from the camera into the TOPRAM adapter, and it > read perfectly in PCLOS.I opened the picture files in GIMP. (The > TOPRAM adapter says usb2.0, but it seems to be plenty fast enough > for this purpose.) > > I don't know if it's necessary, but I clicked on the adapter/card combo > in Dolphin before doing anything else. I understand that this mounts > whatever you click on. It also lets you figure out what /dev it may be > called, or you can copy the files to a local pictures directory and then > address them from there. This is actually what I did, since I wanted to > save the pictures anyway. If one of them turns out to be a clunker, > you can always delete it.
Thanks, I have card reader. If I can use the slot directly, which will be great. just wonder how, > --doug > > -- > Blessed are the peacekeepers...for they shall be shot at from both sides. > --A.M. Greeley > > > -- > To UNSUBSCRIBE, email to [email protected] with a subject > of "unsubscribe". Trouble? Contact [email protected] > Archive: http://lists.debian.org/[email protected] > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/cag9cjmkaaugxv1q6st2ud8ekkqj-u0cfz7qam+f0vsw7+ph...@mail.gmail.com
