On Mon, 07 May 2012 11:40:14 +0200, dagecko wrote: > The onboard ethernet controler works fine with the latest 2.6 kernel > available from the squeeze AMD 64, but does not work anymore on the > latest 3.x kernel from wheezy. > > The controler is recognized like this (lspci): > > 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) > > Below is the relevant part from dmesg at boot time on a kernel 3.2:
(...) This looks good. > Below is the relevant part from dmesg, when trying to get an IP on > system with a kernel 3.2 running, with: > > $ ifconfig eth0 down > $ ifconfig eth0 up > $ dhclient eth0 > > [ 404.449202] r8169 0000:02:00.0: eth0: link down > [ 404.449271] r8169 0000:02:00.0: eth0: link down > [ 404.449810] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 407.220919] r8169 0000:02:00.0: eth0: link up > [ 407.221558] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 417.352083] eth0: no IPv6 routers present > [ 803.808083] ------------[ cut here ]------------ > [ 803.808095] WARNING: at > /build/buildd-linux-2.6_3.2.15-1-amd64-EOdTQR/linux-2.6-3.2.15/debian/build/source_amd64_none/net/sched/sch_generic.c:255 > dev_watchdog+0xe9/0x148() > [ 803.808102] Hardware name: MS-7640 > [ 803.808105] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out (...) You got a kernel oops. You better report it because we (plain users) can't do much with that other than testing with another kernel or loading another driver which is not always desiderable/possible :-) It can be related to this: https://bugzilla.kernel.org/show_bug.cgi?id=14962 Greetings, -- Camaleón -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
