Thank you guys! It seems that the problem is now solved.
I purged my dkms package, and re-installed dkms from squeeze backports I purged fglrx-driver, fglrx-control packages, and re-installed them from squeeze-backports. Then, the fglrx.ko was successfully generated. I rebooted the system, and the window is working fine. Maybe I messed up the installation procedure somehow. I probably needed to install dkms from the squeeze-backports before installing fglrx-driver. I put below my current xorg.conf and /var/log/Xorg.0.log for reference. I am not sure if I needed the tweak on chipID on my xorg.conf. I will experimet later. Again, thank you very much folks! I apprecieate your helps very much. --------------/etc/X11/xorg.conf--------------- Section "Device" Identifier "ATI" Driver "fglrx" Option "ChipID" "1002:6779" Option "MigrationHeuristic" "greedy" Option "AccelDFS" "on" Option "EXAVSync" "yes" Option "RenderAccel" "true" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection -------------------------------------------------------- ---------/var/log/Xorg.0.log------------------- [ 12.345] X.Org X Server 1.10.4 Release Date: 2011-08-19 [ 12.345] X Protocol Version 11, Revision 0 [ 12.345] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian [ 12.345] Current Operating System: Linux gabriel 3.2.0-0.bpo.1-amd64 #1 SMP Sat Feb 11 08:41:32 UTC 2012 x86_64 [ 12.345] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.1-amd64 root=UUID=74c7f0bb-0873-4009-9b91-9147782376ad ro quiet [ 12.345] Build Date: 28 August 2011 09:39:43PM [ 12.345] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <k...@debian.org>) [ 12.345] Current version of pixman: 0.16.4 [ 12.345] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 12.345] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 12.345] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 30 11:44:54 2012 [ 12.400] (==) Using config file: "/etc/X11/xorg.conf" [ 12.400] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 12.483] (==) No Layout section. Using the first Screen section. [ 12.484] (**) |-->Screen "Default Screen" (0) [ 12.484] (**) | |-->Monitor "<default monitor>" [ 12.484] (==) No device specified for screen "Default Screen". Using the first device section listed. [ 12.484] (**) | |-->Device "ATI" [ 12.484] (==) No monitor specified for screen "Default Screen". Using a default monitor configuration. [ 12.484] (==) Automatically adding devices [ 12.484] (==) Automatically enabling devices [ 12.517] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 12.517] Entry deleted from font path. [ 12.550] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 12.550] (==) ModulePath set to "/usr/lib/xorg/modules" [ 12.550] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 12.550] (II) Loader magic: 0x7d3ae0 [ 12.550] (II) Module ABI versions: [ 12.550] X.Org ANSI C Emulation: 0.4 [ 12.550] X.Org Video Driver: 10.0 [ 12.550] X.Org XInput driver : 12.2 [ 12.550] X.Org Server Extension : 5.0 [ 12.551] (--) PCI:*(0:1:0:0) 1002:677b:1462:2496 rev 0, Mem @ 0xc0000000/268435456, 0xfe620000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072 [ 12.551] (II) Open ACPI successful (/var/run/acpid.socket) [ 12.551] (II) LoadModule: "extmod" [ 12.566] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 12.617] (II) Module extmod: vendor="X.Org Foundation" [ 12.617] compiled for 1.10.4, module version = 1.0.0 [ 12.617] Module class: X.Org Server Extension [ 12.617] ABI class: X.Org Server Extension, version 5.0 [ 12.617] (II) Loading extension SELinux [ 12.617] (II) Loading extension MIT-SCREEN-SAVER [ 12.617] (II) Loading extension XFree86-VidModeExtension [ 12.617] (II) Loading extension XFree86-DGA [ 12.617] (II) Loading extension DPMS [ 12.617] (II) Loading extension XVideo [ 12.617] (II) Loading extension XVideo-MotionCompensation [ 12.617] (II) Loading extension X-Resource [ 12.617] (II) LoadModule: "dbe" [ 12.618] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 12.636] (II) Module dbe: vendor="X.Org Foundation" [ 12.636] compiled for 1.10.4, module version = 1.0.0 [ 12.636] Module class: X.Org Server Extension [ 12.636] ABI class: X.Org Server Extension, version 5.0 [ 12.636] (II) Loading extension DOUBLE-BUFFER [ 12.636] (II) LoadModule: "glx" [ 12.636] (II) Loading /usr/lib/xorg/modules/linux/libglx.so [ 12.653] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 12.653] compiled for 6.9.0, module version = 1.0.0 [ 12.653] (II) Loading extension GLX [ 12.653] (II) LoadModule: "record" [ 12.653] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 12.654] (II) Module record: vendor="X.Org Foundation" [ 12.654] compiled for 1.10.4, module version = 1.13.0 [ 12.654] Module class: X.Org Server Extension [ 12.654] ABI class: X.Org Server Extension, version 5.0 [ 12.654] (II) Loading extension RECORD [ 12.654] (II) LoadModule: "dri" [ 12.654] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 12.655] (II) Module dri: vendor="X.Org Foundation" [ 12.655] compiled for 1.10.4, module version = 1.0.0 [ 12.655] ABI class: X.Org Server Extension, version 5.0 [ 12.655] (II) Loading extension XFree86-DRI [ 12.655] (II) LoadModule: "dri2" [ 12.655] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 12.656] (II) Module dri2: vendor="X.Org Foundation" [ 12.656] compiled for 1.10.4, module version = 1.2.0 [ 12.656] ABI class: X.Org Server Extension, version 5.0 [ 12.656] (II) Loading extension DRI2 [ 12.656] (II) LoadModule: "fglrx" [ 12.656] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so [ 12.819] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 12.827] compiled for 1.4.99.906, module version = 8.95.3 [ 12.827] Module class: X.Org Video Driver [ 12.828] (II) Loading sub module "fglrxdrm" [ 12.828] (II) LoadModule: "fglrxdrm" [ 12.828] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so [ 12.877] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 12.877] compiled for 1.4.99.906, module version = 8.95.3 [ 12.877] (II) ATI Proprietary Linux Driver Version Identifier:8.95.3 [ 12.877] (II) ATI Proprietary Linux Driver Release Identifier: 8.951 [ 12.877] (II) ATI Proprietary Linux Driver Build Date: Mar 8 2012 23:06:45 [ 12.877] (++) using VT number 7 [ 12.886] (WW) Falling back to old probe method for fglrx [ 12.932] (II) Loading PCS database from /etc/ati/amdpcsdb [ 12.947] (--) Assigning device section with no busID to primary device [ 12.947] (--) Chipset Supported AMD Graphics Processor (0x677B) found [ 12.948] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 12.948] (II) AMD Video driver is running on a device generally supported by this driver [ 12.949] (II) AMD Video driver is signed [ 12.949] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so [ 12.949] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so [ 12.949] (II) fglrx(0): pEnt->device->identifier=0x802b40 [ 12.949] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin [ 12.949] (II) Loading sub module "vgahw" [ 12.949] (II) LoadModule: "vgahw" [ 12.966] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 12.977] (II) Module vgahw: vendor="X.Org Foundation" [ 12.977] compiled for 1.10.4, module version = 0.1.0 [ 12.977] ABI class: X.Org Video Driver, version 10.0 [ 12.977] (II) fglrx(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 [ 12.977] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 12.977] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 12.977] (==) fglrx(0): Default visual is TrueColor [ 12.977] (==) fglrx(0): RGB weight 888 [ 12.977] (II) fglrx(0): Using 8 bits per RGB [ 12.977] (==) fglrx(0): Buffer Tiling is ON [ 12.978] (II) Loading sub module "fglrxdrm" [ 12.978] (II) LoadModule: "fglrxdrm" [ 12.978] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so [ 12.978] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 12.978] compiled for 1.4.99.906, module version = 8.95.3 [ 12.992] ukiDynamicMajor: found major device number 251 [ 12.992] ukiDynamicMajor: found major device number 251 [ 12.992] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 12.992] ukiOpenDevice: node name is /dev/ati/card0 [ 12.992] ukiOpenDevice: open result is 10, (OK) [ 12.992] ukiOpenByBusid: ukiOpenMinor returns 10 [ 12.992] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 12.992] (**) fglrx(0): NoAccel = NO [ 12.992] (**) fglrx(0): ATI 2D Acceleration Architecture enabled [ 12.992] (--) fglrx(0): Chipset: "AMD Radeon HD 7400 Series" (Chipset = 0x677b) [ 12.992] (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x2496) [ 12.992] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI [ 12.992] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000 [ 12.992] (--) fglrx(0): MMIO registers at 0xfe620000 [ 12.992] (--) fglrx(0): I/O port at 0x0000e000 [ 12.992] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 13.004] (II) fglrx(0): AC Adapter is used [ 13.041] (II) fglrx(0): Primary V_BIOS segment is: 0xc000 [ 13.214] (II) Loading sub module "vbe" [ 13.214] (II) LoadModule: "vbe" [ 13.214] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 13.277] (II) Module vbe: vendor="X.Org Foundation" [ 13.277] compiled for 1.10.4, module version = 1.1.0 [ 13.277] ABI class: X.Org Video Driver, version 10.0 [ 13.277] (II) fglrx(0): VESA BIOS detected [ 13.277] (II) fglrx(0): VESA VBE Version 3.0 [ 13.277] (II) fglrx(0): VESA VBE Total Mem: 16384 kB [ 13.277] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS [ 13.277] (II) fglrx(0): VESA VBE OEM Software Rev: 13.12 [ 13.277] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc. [ 13.277] (II) fglrx(0): VESA VBE OEM Product: CAICOS [ 13.277] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 [ 13.307] (II) fglrx(0): ATI Video BIOS revision 9 or later detected [ 13.307] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3 [ 13.307] (II) fglrx(0): PCIE card detected [ 13.308] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 13.308] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 13.313] (II) fglrx(0): Using adapter: 1:0.0. [ 13.341] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000) [ 13.639] (II) fglrx(0): Interrupt handler installed at IRQ 53. [ 13.639] (II) fglrx(0): RandR 1.2 support is enabled! [ 13.639] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 13.639] (==) fglrx(0): Center Mode is disabled [ 13.639] (II) Loading sub module "fb" [ 13.639] (II) LoadModule: "fb" [ 13.639] (II) Loading /usr/lib/xorg/modules/libfb.so [ 13.668] (II) Module fb: vendor="X.Org Foundation" [ 13.668] compiled for 1.10.4, module version = 1.0.0 [ 13.668] ABI class: X.Org ANSI C Emulation, version 0.4 [ 13.669] (II) Loading sub module "ddc" [ 13.669] (II) LoadModule: "ddc" [ 13.669] (II) Module "ddc" already built-in [ 13.857] (II) fglrx(0): Finished Initialize PPLIB! [ 13.870] (II) fglrx(0): Output DFP1 has no monitor section [ 13.870] (II) fglrx(0): Output DFP2 has no monitor section [ 13.870] (II) fglrx(0): Output CRT1 has no monitor section [ 13.870] (II) Loading sub module "ddc" [ 13.870] (II) LoadModule: "ddc" [ 13.870] (II) Module "ddc" already built-in [ 13.870] (II) fglrx(0): Connected Display0: DFP2 [ 13.870] (II) fglrx(0): Display0 EDID data --------------------------- [ 13.870] (II) fglrx(0): Manufacturer: ENC Model: 2294 Serial#: 16843009 [ 13.870] (II) fglrx(0): Year: 2012 Week: 14 [ 13.870] (II) fglrx(0): EDID Version: 1.3 [ 13.870] (II) fglrx(0): Digital Display Input [ 13.870] (II) fglrx(0): Max Image Size [cm]: horiz.: 51 vert.: 29 [ 13.870] (II) fglrx(0): Gamma: 2.20 [ 13.870] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off [ 13.870] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 13.870] (II) fglrx(0): First detailed timing is preferred mode [ 13.870] (II) fglrx(0): redX: 0.660 redY: 0.330 greenX: 0.310 greenY: 0.620 [ 13.870] (II) fglrx(0): blueX: 0.150 blueY: 0.040 whiteX: 0.313 whiteY: 0.329 [ 13.870] (II) fglrx(0): Supported established timings: [ 13.870] (II) fglrx(0): 720x400@70Hz [ 13.870] (II) fglrx(0): 640x480@60Hz [ 13.870] (II) fglrx(0): 800x600@60Hz [ 13.870] (II) fglrx(0): 1024x768@60Hz [ 13.870] (II) fglrx(0): Manufacturer's mask: 0 [ 13.870] (II) fglrx(0): Supported standard timings: [ 13.870] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 13.870] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 13.870] (II) fglrx(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 13.870] (II) fglrx(0): #3: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 13.881] (II) fglrx(0): Supported detailed timing: [ 13.881] (II) fglrx(0): clock: 148.5 MHz Image Size: 510 x 287 mm [ 13.881] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 13.881] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 13.881] (II) fglrx(0): Serial No: 68112032 [ 13.881] (II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 68 kHz, PixClock max 155 MHz [ 13.881] (II) fglrx(0): Monitor name: EV2335W [ 13.881] (II) fglrx(0): EDID (in hex): [ 13.881] (II) fglrx(0): 00ffffffffffff0015c3942201010101 [ 13.881] (II) fglrx(0): 0e16010380331d78ea2795a9544f9e26 [ 13.881] (II) fglrx(0): 0a5054a1080081808140b30081c00101 [ 13.881] (II) fglrx(0): 010101010101023a801871382d40582c [ 13.881] (II) fglrx(0): 4500fe1f1100001e000000ff00363831 [ 13.881] (II) fglrx(0): 31323033320a20202020000000fd003b [ 13.881] (II) fglrx(0): 3d1f440f000a202020202020000000fc [ 13.881] (II) fglrx(0): 00455632333335570a20202020200004 [ 13.881] (II) fglrx(0): End of Display0 EDID data -------------------- [ 13.881] (II) fglrx(0): EDID for output DFP1 [ 13.881] (II) fglrx(0): EDID for output DFP2 [ 13.881] (II) fglrx(0): Manufacturer: ENC Model: 2294 Serial#: 16843009 [ 13.881] (II) fglrx(0): Year: 2012 Week: 14 [ 13.881] (II) fglrx(0): EDID Version: 1.3 [ 13.881] (II) fglrx(0): Digital Display Input [ 13.881] (II) fglrx(0): Max Image Size [cm]: horiz.: 51 vert.: 29 [ 13.881] (II) fglrx(0): Gamma: 2.20 [ 13.881] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off [ 13.881] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 13.881] (II) fglrx(0): First detailed timing is preferred mode [ 13.881] (II) fglrx(0): redX: 0.660 redY: 0.330 greenX: 0.310 greenY: 0.620 [ 13.881] (II) fglrx(0): blueX: 0.150 blueY: 0.040 whiteX: 0.313 whiteY: 0.329 [ 13.881] (II) fglrx(0): Supported established timings: [ 13.881] (II) fglrx(0): 720x400@70Hz [ 13.881] (II) fglrx(0): 640x480@60Hz [ 13.881] (II) fglrx(0): 800x600@60Hz [ 13.881] (II) fglrx(0): 1024x768@60Hz [ 13.881] (II) fglrx(0): Manufacturer's mask: 0 [ 13.881] (II) fglrx(0): Supported standard timings: [ 13.881] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 13.881] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 13.881] (II) fglrx(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 13.881] (II) fglrx(0): #3: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 13.881] (II) fglrx(0): Supported detailed timing: [ 13.881] (II) fglrx(0): clock: 148.5 MHz Image Size: 510 x 287 mm [ 13.881] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 13.881] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 13.881] (II) fglrx(0): Serial No: 68112032 [ 13.881] (II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 68 kHz, PixClock max 155 MHz [ 13.881] (II) fglrx(0): Monitor name: EV2335W [ 13.881] (II) fglrx(0): EDID (in hex): [ 13.881] (II) fglrx(0): 00ffffffffffff0015c3942201010101 [ 13.881] (II) fglrx(0): 0e16010380331d78ea2795a9544f9e26 [ 13.881] (II) fglrx(0): 0a5054a1080081808140b30081c00101 [ 13.881] (II) fglrx(0): 010101010101023a801871382d40582c [ 13.881] (II) fglrx(0): 4500fe1f1100001e000000ff00363831 [ 13.881] (II) fglrx(0): 31323033320a20202020000000fd003b [ 13.881] (II) fglrx(0): 3d1f440f000a202020202020000000fc [ 13.881] (II) fglrx(0): 00455632333335570a20202020200004 [ 13.881] (II) fglrx(0): Printing probed modes for output DFP2 [ 13.881] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 13.881] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) [ 13.881] (II) fglrx(0): Modeline "1400x1050"x60.0 146.25 1400 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) [ 13.881] (II) fglrx(0): Modeline "1600x900"x60.0 146.25 1600 1784 1960 2240 900 1053 1059 1089 -hsync +vsync (65.3 kHz) [ 13.881] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 13.881] (II) fglrx(0): Modeline "1440x900"x60.0 146.25 1440 1784 1960 2240 900 1053 1059 1089 -hsync +vsync (65.3 kHz) [ 13.881] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 13.881] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz) [ 13.881] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) [ 13.881] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 13.881] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 13.881] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 13.881] (II) fglrx(0): EDID for output CRT1 [ 13.881] (II) fglrx(0): Output DFP1 disconnected [ 13.881] (II) fglrx(0): Output DFP2 connected [ 13.881] (II) fglrx(0): Output CRT1 disconnected [ 13.881] (II) fglrx(0): Using exact sizes for initial modes [ 13.881] (II) fglrx(0): Output DFP2 using initial mode 1920x1080 [ 13.881] (II) fglrx(0): DPI set to (96, 96) [ 13.881] (II) fglrx(0): Eyefinity capable adapter detected. [ 13.881] (II) fglrx(0): Adapter AMD Radeon HD 7400 Series has 4 configurable heads and 1 displays connected. [ 13.881] (==) fglrx(0): PseudoColor visuals disabled [ 13.881] (II) Loading sub module "ramdac" [ 13.881] (II) LoadModule: "ramdac" [ 13.881] (II) Module "ramdac" already built-in [ 13.882] (==) fglrx(0): NoDRI = NO [ 13.882] (==) fglrx(0): Capabilities: 0x00000000 [ 13.882] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 13.882] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 13.882] (==) fglrx(0): UseFastTLS=0 [ 13.882] (==) fglrx(0): BlockSignalsOnLock=1 [ 13.882] (--) Depth 24 pixmap format is 32 bpp [ 13.882] (II) Loading extension ATIFGLRXDRI [ 13.882] (II) fglrx(0): doing swlDriScreenInit [ 13.882] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 13.882] ukiDynamicMajor: found major device number 251 [ 13.882] ukiDynamicMajor: found major device number 251 [ 13.882] ukiDynamicMajor: found major device number 251 [ 13.882] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 13.882] ukiOpenDevice: node name is /dev/ati/card0 [ 13.882] ukiOpenDevice: open result is 13, (OK) [ 13.882] ukiOpenByBusid: ukiOpenMinor returns 13 [ 13.882] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 13.882] (II) fglrx(0): [uki] DRM interface version 1.0 [ 13.882] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" [ 13.882] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 [ 13.882] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fdb8805d000 [ 13.882] (II) fglrx(0): [uki] framebuffer handle = 0x3000 [ 13.882] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 13.882] (II) fglrx(0): swlDriScreenInit done [ 13.882] (II) fglrx(0): Kernel Module Version Information: [ 13.882] (II) fglrx(0): Name: fglrx [ 13.882] (II) fglrx(0): Version: 8.95.3 [ 13.882] (II) fglrx(0): Date: Mar 8 2012 [ 13.882] (II) fglrx(0): Desc: ATI FireGL DRM kernel module [ 13.882] (II) fglrx(0): Kernel Module version matches driver. [ 13.882] (II) fglrx(0): Kernel Module Build Time Information: [ 13.882] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.2.0-0.bpo.1-amd64 [ 13.882] (II) fglrx(0): Build-Kernel MODVERSIONS: no [ 13.882] (II) fglrx(0): Build-Kernel __SMP__: no [ 13.882] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 13.882] (II) fglrx(0): [uki] register handle = 0x00004000 [ 13.902] (II) fglrx(0): DRI initialization successfull [ 13.902] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000 [ 13.910] (==) fglrx(0): Backing store disabled [ 13.910] (II) Loading extension FGLRXEXTENSION [ 13.910] (==) fglrx(0): DPMS enabled [ 13.911] (II) fglrx(0): Initialized in-driver Xinerama extension [ 13.911] (**) fglrx(0): Textured Video is enabled. [ 13.911] (II) LoadModule: "glesx" [ 13.911] (II) Loading /usr/lib/xorg/modules/glesx.so [ 14.001] (II) Module glesx: vendor="X.Org Foundation" [ 14.001] compiled for 1.4.99.906, module version = 1.0.0 [ 14.001] (II) Loading extension GLESX [ 14.001] (II) fglrx(0): GLESX enableFlags = 592 [ 14.002] (II) fglrx(0): GLESX is enabled [ 14.002] (II) LoadModule: "amdxmm" [ 14.002] (II) Loading /usr/lib/xorg/modules/amdxmm.so [ 14.012] (II) Module amdxmm: vendor="X.Org Foundation" [ 14.012] compiled for 1.4.99.906, module version = 2.0.0 [ 14.024] (II) Loading extension AMDXVOPL [ 14.024] (II) Loading extension AMDXVBA [ 14.030] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): [ 14.031] (II) fglrx(0): Enable composite support successfully [ 14.031] (WW) fglrx(0): Option "ChipID" is not used [ 14.031] (WW) fglrx(0): Option "MigrationHeuristic" is not used [ 14.031] (WW) fglrx(0): Option "AccelDFS" is not used [ 14.031] (WW) fglrx(0): Option "EXAVSync" is not used [ 14.031] (WW) fglrx(0): Option "RenderAccel" is not used [ 14.031] (II) fglrx(0): X context handle = 0x1 [ 14.031] (II) fglrx(0): [DRI] installation complete [ 14.032] (==) fglrx(0): Silken mouse enabled [ 14.032] (==) fglrx(0): Using HW cursor of display infrastructure! [ 14.032] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. [ 14.108] (--) RandR disabled [ 14.108] (II) Initializing built-in extension Generic Event Extension [ 14.108] (II) Initializing built-in extension SHAPE [ 14.108] (II) Initializing built-in extension MIT-SHM [ 14.108] (II) Initializing built-in extension XInputExtension [ 14.108] (II) Initializing built-in extension XTEST [ 14.108] (II) Initializing built-in extension BIG-REQUESTS [ 14.108] (II) Initializing built-in extension SYNC [ 14.108] (II) Initializing built-in extension XKEYBOARD [ 14.108] (II) Initializing built-in extension XC-MISC [ 14.108] (II) Initializing built-in extension SECURITY [ 14.108] (II) Initializing built-in extension XINERAMA [ 14.108] (II) Initializing built-in extension XFIXES [ 14.108] (II) Initializing built-in extension RENDER [ 14.108] (II) Initializing built-in extension RANDR [ 14.108] (II) Initializing built-in extension COMPOSITE [ 14.108] (II) Initializing built-in extension DAMAGE [ 14.108] (II) SELinux: Disabled on system [ 14.109] ukiDynamicMajor: found major device number 251 [ 14.109] ukiDynamicMajor: found major device number 251 [ 14.109] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 14.109] ukiOpenDevice: node name is /dev/ati/card0 [ 14.109] ukiOpenDevice: open result is 14, (OK) [ 14.109] ukiOpenByBusid: ukiOpenMinor returns 14 [ 14.109] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 14.668] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0 [ 14.730] (II) fglrx(0): Enable the clock gating! [ 14.730] (II) fglrx(0): Setting screen physical size to 508 x 285 [ 15.010] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 15.010] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 15.010] (II) LoadModule: "evdev" [ 15.011] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 15.028] (II) Module evdev: vendor="X.Org Foundation" [ 15.028] compiled for 1.10.3, module version = 2.6.0 [ 15.028] Module class: X.Org XInput Driver [ 15.028] ABI class: X.Org XInput driver, version 12.2 [ 15.028] (II) Using input driver 'evdev' for 'Power Button' [ 15.028] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 15.028] (**) Power Button: always reports core events [ 15.028] (**) Power Button: Device: "/dev/input/event5" [ 15.028] (--) Power Button: Found keys [ 15.028] (II) Power Button: Configuring as keyboard [ 15.028] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5" [ 15.028] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 15.028] (**) Option "xkb_rules" "evdev" [ 15.028] (**) Option "xkb_model" "pc105" [ 15.028] (**) Option "xkb_layout" "jp" [ 15.067] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 15.067] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 15.067] (II) Using input driver 'evdev' for 'Power Button' [ 15.067] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 15.067] (**) Power Button: always reports core events [ 15.067] (**) Power Button: Device: "/dev/input/event4" [ 15.067] (--) Power Button: Found keys [ 15.067] (II) Power Button: Configuring as keyboard [ 15.067] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4" [ 15.067] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 15.067] (**) Option "xkb_rules" "evdev" [ 15.067] (**) Option "xkb_model" "pc105" [ 15.067] (**) Option "xkb_layout" "jp" [ 15.068] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14) [ 15.068] (II) No input driver/identifier specified (ignoring) [ 15.069] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event0) [ 15.069] (**) CHICONY USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 15.069] (II) Using input driver 'evdev' for 'CHICONY USB Keyboard' [ 15.069] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 15.069] (**) CHICONY USB Keyboard: always reports core events [ 15.069] (**) CHICONY USB Keyboard: Device: "/dev/input/event0" [ 15.069] (--) CHICONY USB Keyboard: Found keys [ 15.069] (II) CHICONY USB Keyboard: Configuring as keyboard [ 15.069] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0/event0" [ 15.069] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD) [ 15.069] (**) Option "xkb_rules" "evdev" [ 15.069] (**) Option "xkb_model" "pc105" [ 15.069] (**) Option "xkb_layout" "jp" [ 15.070] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event1) [ 15.070] (**) CHICONY USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 15.070] (II) Using input driver 'evdev' for 'CHICONY USB Keyboard' [ 15.070] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 15.070] (**) CHICONY USB Keyboard: always reports core events [ 15.070] (**) CHICONY USB Keyboard: Device: "/dev/input/event1" [ 15.070] (--) CHICONY USB Keyboard: Found 1 mouse buttons [ 15.070] (--) CHICONY USB Keyboard: Found scroll wheel(s) [ 15.070] (--) CHICONY USB Keyboard: Found relative axes [ 15.070] (--) CHICONY USB Keyboard: Found absolute axes [ 15.070] (--) CHICONY USB Keyboard: Found keys [ 15.070] (II) CHICONY USB Keyboard: Configuring as mouse [ 15.070] (II) CHICONY USB Keyboard: Configuring as keyboard [ 15.070] (II) CHICONY USB Keyboard: Adding scrollwheel support [ 15.070] (**) CHICONY USB Keyboard: YAxisMapping: buttons 4 and 5 [ 15.070] (**) CHICONY USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 15.070] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input1/event1" [ 15.070] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD) [ 15.070] (**) Option "xkb_rules" "evdev" [ 15.070] (**) Option "xkb_model" "pc105" [ 15.070] (**) Option "xkb_layout" "jp" [ 15.070] (EE) CHICONY USB Keyboard: failed to initialize for relative axes. [ 15.070] (II) CHICONY USB Keyboard: initialized for absolute axes. [ 15.070] (**) CHICONY USB Keyboard: (accel) keeping acceleration scheme 1 [ 15.070] (**) CHICONY USB Keyboard: (accel) acceleration profile 0 [ 15.070] (**) CHICONY USB Keyboard: (accel) acceleration factor: 2.000 [ 15.071] (**) CHICONY USB Keyboard: (accel) acceleration threshold: 4 [ 15.071] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6) [ 15.071] (II) No input driver/identifier specified (ignoring) [ 15.071] (II) config/udev: Adding input device HDA Intel PCH Line-out (/dev/input/event10) [ 15.071] (II) No input driver/identifier specified (ignoring) [ 15.071] (II) config/udev: Adding input device HDA Intel PCH Line-out (/dev/input/event11) [ 15.071] (II) No input driver/identifier specified (ignoring) [ 15.072] (II) config/udev: Adding input device HDA Intel PCH Line-out (/dev/input/event12) [ 15.072] (II) No input driver/identifier specified (ignoring) [ 15.072] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13) [ 15.072] (II) No input driver/identifier specified (ignoring) [ 15.072] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7) [ 15.072] (II) No input driver/identifier specified (ignoring) [ 15.072] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8) [ 15.072] (II) No input driver/identifier specified (ignoring) [ 15.073] (II) config/udev: Adding input device HDA Intel PCH Line-out (/dev/input/event9) [ 15.073] (II) No input driver/identifier specified (ignoring) [ 15.074] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event2) [ 15.074] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 15.074] (II) Using input driver 'evdev' for 'USB Optical Mouse' [ 15.074] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 15.074] (**) USB Optical Mouse: always reports core events [ 15.074] (**) USB Optical Mouse: Device: "/dev/input/event2" [ 15.074] (--) USB Optical Mouse: Found 3 mouse buttons [ 15.074] (--) USB Optical Mouse: Found scroll wheel(s) [ 15.074] (--) USB Optical Mouse: Found relative axes [ 15.074] (--) USB Optical Mouse: Found x and y relative axes [ 15.074] (II) USB Optical Mouse: Configuring as mouse [ 15.074] (II) USB Optical Mouse: Adding scrollwheel support [ 15.074] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 15.074] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 15.075] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input2/event2" [ 15.075] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE) [ 15.075] (II) USB Optical Mouse: initialized for relative axes. [ 15.075] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 15.075] (**) USB Optical Mouse: (accel) acceleration profile 0 [ 15.075] (**) USB Optical Mouse: (accel) acceleration factor: 2.000 [ 15.075] (**) USB Optical Mouse: (accel) acceleration threshold: 4 [ 15.075] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0) [ 15.075] (II) No input driver/identifier specified (ignoring) [ 15.079] (II) config/udev: Adding input device PC Speaker (/dev/input/event3) [ 15.079] (II) No input driver/identifier specified (ignoring) [ 15.082] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 16.825] (II) fglrx(0): EDID vendor "ENC", prod id 8852 [ 16.825] (II) fglrx(0): Using EDID range info for horizontal sync [ 16.825] (II) fglrx(0): Using EDID range info for vertical refresh [ 16.825] (II) fglrx(0): Printing DDC gathered Modelines: [ 16.825] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 16.825] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 16.825] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 16.825] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 16.825] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 16.825] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 16.825] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 16.825] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 16.825] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) [ 16.838] (II) fglrx(0): EDID vendor "ENC", prod id 8852 [ 16.838] (II) fglrx(0): Using hsync ranges from config file [ 16.838] (II) fglrx(0): Using vrefresh ranges from config file [ 16.838] (II) fglrx(0): Printing DDC gathered Modelines: [ 16.838] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 16.838] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 16.838] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 16.838] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 16.838] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 16.838] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 16.838] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 16.838] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 16.838] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) [ 16.923] (II) fglrx(0): EDID vendor "ENC", prod id 8852 [ 16.923] (II) fglrx(0): Using hsync ranges from config file [ 16.923] (II) fglrx(0): Using vrefresh ranges from config file [ 16.923] (II) fglrx(0): Printing DDC gathered Modelines: [ 16.923] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 16.923] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 16.923] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 16.923] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 16.923] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 16.923] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 16.923] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 16.923] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 16.923] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) [ 28.131] (II) fglrx(0): EDID vendor "ENC", prod id 8852 [ 28.131] (II) fglrx(0): Using hsync ranges from config file [ 28.131] (II) fglrx(0): Using vrefresh ranges from config file [ 28.131] (II) fglrx(0): Printing DDC gathered Modelines: [ 28.131] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 28.131] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 28.131] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 28.131] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 28.131] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 28.131] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 28.131] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 28.131] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 28.131] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) [ 28.141] (II) fglrx(0): EDID vendor "ENC", prod id 8852 [ 28.141] (II) fglrx(0): Using hsync ranges from config file [ 28.141] (II) fglrx(0): Using vrefresh ranges from config file [ 28.141] (II) fglrx(0): Printing DDC gathered Modelines: [ 28.141] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 28.141] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 28.141] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 28.142] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 28.142] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 28.142] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 28.142] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 28.142] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 28.142] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) [ 28.153] (II) fglrx(0): EDID vendor "ENC", prod id 8852 [ 28.153] (II) fglrx(0): Using hsync ranges from config file [ 28.153] (II) fglrx(0): Using vrefresh ranges from config file [ 28.153] (II) fglrx(0): Printing DDC gathered Modelines: [ 28.153] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 28.153] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 28.153] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 28.153] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 28.153] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 28.153] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 28.153] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 28.153] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 28.153] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) [ 30.496] (II) fglrx(0): EDID vendor "ENC", prod id 8852 [ 30.496] (II) fglrx(0): Using hsync ranges from config file [ 30.496] (II) fglrx(0): Using vrefresh ranges from config file [ 30.497] (II) fglrx(0): Printing DDC gathered Modelines: [ 30.497] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 30.497] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 30.497] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 30.497] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 30.497] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 30.497] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 30.497] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) [ 30.497] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [ 30.497] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cadz+jbpjktcqbwgpet6mwwcba3zhtefo+neccnouofgciqf...@mail.gmail.com
