Dear All, i am a newbie, i tried RAID 1 installation on VM which was working fine. now i tried to install the same scenario on physical machine. i have two 300 GB Hard drives and i want to make a RAID1 every things work perfectly. i created the RAID partition and then RAID device. i created 3 partition on the RAID drive.
1./boot (1GB) 2.SWAP (not on RAID) 3./Root (300 GB) now everything when fine to the end of the installation but the problem is when i restart the machine after installation. it doest boot however in VM machine it didn't happen. but one thing i notice during installation it is giving me the message "the Kernel was unable to re-read the partition table on /dev/md0 (invalid argument) this means Linux won't know anything about the modifications you made until you reboot you should reboot you computer before doing anyting with /dev/md0. i tried Squeez 6.0.4 and Lenny several times and at the end no-success. kindly Help! Thanks, MYK -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cagwvfmndthcyqphkyupag4ejzttyerrzwfvmmzy_b0zprn9...@mail.gmail.com
