Hello Frank, Fist of all, thank you for your fast answer.
I use Soft Raid... and not Hard. So the disk array present me all the disks without any RAID or control. So if i want to remove a HDD, i have to set it faulty and logical remove from mdadm before hard remove HDD physically. And when i want add the new one... my system doesn't detect it... So i need a little voodoo solution to "force" Debian see the HDD :) JG. Le 17 février 2012 11:46, Frank <fr...@dead-link.org> a écrit : > If you use the onboard controller there is no need to do some software > voodoo. Just replace a faulty drive by a new one. The rebuild starts > automatically. > > Your device is /dev/cciss/c0d0 > > Frank > > Am 17.02.2012 um 11:35 schrieb Julien Groselle <julien.grose...@gmail.com > >: > > > Hi, > > > > After peel the web to find any information about how to add / remove > hard drive on Debian. > > My Hardware is HP ProLiant DL380 G7, with HP Smart Array P410i > Controller version 3.50. > > > > I had preferred soft RAID solution with mdadm. But the only bad point > for me is the Hot Plug. > > Could some one help me to add / remove hard drive disk from my server ? > > > > I have tested many solution with "rescan", and i think the solution is > not so far... > > > > I'm sure that at least one Debian user use this hardware and want use > hot plug. > > If not, I'm listening for any information about hot plug on any hardware. > > > > Have all a good day. > > > > JG. >
