Hi list,
I am a new Debian user. I installed squeezy three days ago, having
several hardware problems, one of which was wifi, and folks from the
laptop debian list helped me still with no solution, one of the facts
related was migrating to backports kernel.
Sound hasn't worked since the first Debian install, and it is
important to me as the most important activity I do in my laptop is
programming Puredata. So, to not fill the list with all the hardware
problems at once I would like some help in this sound problem, please.
in the txt files along with this mail, I send the following info:
dsmesg
lsmod
lspci
uname -r
lspci |grep Audio
lsmod |grep hda_
/proc/asound/ ls .l and cat cards
/proc/asound/card0/codec#0
/proc/asound/card1/codec#0
Thank you a lot for your help,
Fernando
--
Fernando Gadea
[ 0.343750] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff]
[ 0.343754] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xffffffff]
[ 0.343758] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.343762] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit
pref]
[ 0.343767] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.343771] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.343775] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.343779] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.343783] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.343787] pci_bus 0000:03: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.343791] pci_bus 0000:03: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.343795] pci_bus 0000:03: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.343799] pci_bus 0000:03: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.343803] pci_bus 0000:03: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.343807] pci_bus 0000:03: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.343811] pci_bus 0000:03: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.343815] pci_bus 0000:03: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.343819] pci_bus 0000:03: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.343823] pci_bus 0000:03: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.343827] pci_bus 0000:03: resource 18 [mem 0x000ec000-0x000effff]
[ 0.343831] pci_bus 0000:03: resource 19 [mem 0xe0000000-0xf7ffffff]
[ 0.343835] pci_bus 0000:03: resource 20 [mem 0xfc000000-0xffffffff]
[ 0.344114] NET: Registered protocol family 2
[ 0.344620] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.347544] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[ 0.352600] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.353179] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.353184] TCP reno registered
[ 0.353225] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.353331] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.353825] NET: Registered protocol family 1
[ 0.353857] pci 0000:00:01.0: Boot video device
[ 0.448352] PCI: CLS 64 bytes, default 64
[ 0.448455] Unpacking initramfs...
[ 0.831959] Freeing initrd memory: 9548k freed
[ 0.837743] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.837751] Placing 64MB software IO TLB between ffff8800dba3f000 -
ffff8800dfa3f000
[ 0.837756] software IO TLB at phys 0xdba3f000 - 0xdfa3f000
[ 0.837880] Simple Boot Flag at 0x44 set to 0x1
[ 0.838815] audit: initializing netlink socket (disabled)
[ 0.838841] type=2000 audit(1327237173.836:1): initialized
[ 0.862278] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.864850] VFS: Disk quotas dquot_6.5.2
[ 0.864969] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.865128] msgmni has been set to 15209
[ 0.865889] alg: No test for stdrng (krng)
[ 0.865994] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.866002] io scheduler noop registered
[ 0.866005] io scheduler deadline registered
[ 0.866062] io scheduler cfq registered (default)
[ 0.866524] ERST: Table is not found!
[ 0.866649] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.921051] Linux agpgart interface v0.103
[ 0.921270] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 0.931947] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.931965] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.932229] mousedev: PS/2 mouse device common for all mice
[ 0.932358] rtc_cmos 00:05: RTC can wake from S4
[ 0.932680] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.932732] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.932760] cpuidle: using governor ladder
[ 0.932764] cpuidle: using governor menu
[ 0.933156] TCP cubic registered
[ 0.933407] NET: Registered protocol family 10
[ 0.934575] Mobile IPv6
[ 0.934581] NET: Registered protocol family 17
[ 0.934590] Registering the dns_resolver key type
[ 0.934806] PM: Hibernation image not present or could not be loaded.
[ 0.934831] registered taskstats version 1
[ 0.936130] rtc_cmos 00:05: setting system clock to 2012-01-22 12:59:34 UTC
(1327237174)
[ 0.936243] Initializing network drop monitor service
[ 0.936291] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.939158] Freeing unused kernel memory: 596k freed
[ 0.939460] Write protecting the kernel read-only data: 6144k
[ 0.944740] Freeing unused kernel memory: 764k freed
[ 0.950436] Freeing unused kernel memory: 788k freed
[ 0.986643] udev[47]: starting version 164
[ 1.214307] usbcore: registered new interface driver usbfs
[ 1.214394] usbcore: registered new interface driver hub
[ 1.216539] SCSI subsystem initialized
[ 1.218829] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no
elements (empty) (20110316/nspredef-456)
[ 1.218844] ACPI: [Package] has zero elements (ffff8801fb9b5280)
[ 1.218912] ACPI: Invalid active0 threshold
[ 1.220553] usbcore: registered new device driver usb
[ 1.227333] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.227340] ACPI: Thermal Zone [THRM] (60 C)
[ 1.230450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.230559] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.230614] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 1.230621] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.230664] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 1.261717] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 1.261772] QUIRK: Enable AMD PLL fix
[ 1.261806] ehci_hcd 0000:00:12.2: debug port 1
[ 1.261853] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf024c000
[ 1.263218] libata version 3.00 loaded.
[ 1.278200] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.278246] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.278252] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.278256] usb usb1: Product: EHCI Host Controller
[ 1.278260] usb usb1: Manufacturer: Linux 2.6.39-bpo.2-amd64 ehci_hcd
[ 1.278264] usb usb1: SerialNumber: 0000:00:12.2
[ 1.278590] hub 1-0:1.0: USB hub found
[ 1.278600] hub 1-0:1.0: 5 ports detected
[ 1.278804] ahci 0000:00:11.0: version 3.0
[ 1.278857] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.278994] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x1
impl SATA mode
[ 1.279003] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part
[ 1.279081] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.279135] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.279206] r8169 0000:01:00.0: setting latency timer to 64
[ 1.279215] r8169 0000:01:00.0: (unregistered net_device): unknown MAC,
using family default
[ 1.279324] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[ 1.280434] r8169 0000:01:00.0: eth0: RTL8168b/8111b at 0xffffc900057aa000,
68:b5:99:d4:60:24, XID 0c200000 IRQ 40
[ 1.280554] scsi0 : ahci
[ 1.280782] ata1: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e100
irq 19
[ 1.280958] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.281020] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 1.281027] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.281057] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 1.296279] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 1.296340] ehci_hcd 0000:00:13.2: debug port 1
[ 1.296369] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf024a000
[ 1.308267] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.308332] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.308337] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.308342] usb usb2: Product: EHCI Host Controller
[ 1.308346] usb usb2: Manufacturer: Linux 2.6.39-bpo.2-amd64 ehci_hcd
[ 1.308349] usb usb2: SerialNumber: 0000:00:13.2
[ 1.308602] hub 2-0:1.0: USB hub found
[ 1.308611] hub 2-0:1.0: 5 ports detected
[ 1.308773] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.308846] ehci_hcd 0000:00:16.2: setting latency timer to 64
[ 1.308852] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.308870] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus
number 3
[ 1.320287] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 1.320346] ehci_hcd 0000:00:16.2: debug port 1
[ 1.320374] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf0248000
[ 1.332269] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.332331] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.332336] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.332341] usb usb3: Product: EHCI Host Controller
[ 1.332344] usb usb3: Manufacturer: Linux 2.6.39-bpo.2-amd64 ehci_hcd
[ 1.332348] usb usb3: SerialNumber: 0000:00:16.2
[ 1.332593] hub 3-0:1.0: USB hub found
[ 1.332602] hub 3-0:1.0: 4 ports detected
[ 1.388941] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.389022] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.389080] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 1.389087] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.389112] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus
number 4
[ 1.412336] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf024d000
[ 1.472287] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.472295] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.472299] usb usb4: Product: OHCI Host Controller
[ 1.472303] usb usb4: Manufacturer: Linux 2.6.39-bpo.2-amd64 ohci_hcd
[ 1.472307] usb usb4: SerialNumber: 0000:00:12.0
[ 1.472556] hub 4-0:1.0: USB hub found
[ 1.472576] hub 4-0:1.0: 5 ports detected
[ 1.472757] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.472821] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 1.472827] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.472843] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 5
[ 1.484398] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf024b000
[ 1.544284] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.544291] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.544295] usb usb5: Product: OHCI Host Controller
[ 1.544299] usb usb5: Manufacturer: Linux 2.6.39-bpo.2-amd64 ohci_hcd
[ 1.544303] usb usb5: SerialNumber: 0000:00:13.0
[ 1.544563] hub 5-0:1.0: USB hub found
[ 1.544578] hub 5-0:1.0: 5 ports detected
[ 1.544757] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.544806] ohci_hcd 0000:00:16.0: setting latency timer to 64
[ 1.544813] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.544832] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus
number 6
[ 1.544980] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf0249000
[ 1.604323] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.604330] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.604335] usb usb6: Product: OHCI Host Controller
[ 1.604339] usb usb6: Manufacturer: Linux 2.6.39-bpo.2-amd64 ohci_hcd
[ 1.604342] usb usb6: SerialNumber: 0000:00:16.0
[ 1.604602] hub 6-0:1.0: USB hub found
[ 1.604625] hub 6-0:1.0: 4 ports detected
[ 1.620292] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 1.772262] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.773232] ata1.00: ATA-8: Hitachi HTS725032A9A364, PC3OCH0A, max UDMA/100
[ 1.773239] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.774814] ata1.00: configured for UDMA/100
[ 1.775310] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72503 PC3O
PQ: 0 ANSI: 5
[ 1.789701] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298
GiB)
[ 1.789807] sd 0:0:0:0: [sda] Write Protect is off
[ 1.789813] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.789858] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.836260] Refined TSC clocksource calibration: 1596.003 MHz.
[ 1.836280] Switching to clocksource tsc
[ 1.840598] sda: sda1 sda2 sda3
[ 1.841691] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.252699] PM: Starting manual resume from disk
[ 2.252707] PM: Hibernation image partition 8:2 present
[ 2.252711] PM: Looking for hibernation image.
[ 2.253149] PM: Image not found (code -22)
[ 2.253155] PM: Hibernation image not present or could not be loaded.
[ 2.327195] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 2.655936] usb 2-1: New USB device found, idVendor=04f2, idProduct=b236
[ 2.655949] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.655958] usb 2-1: Product: CNFA033
[ 2.655965] usb 2-1: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.655972] usb 2-1: SerialNumber: 0x0001
[ 2.784307] usb 2-2: new high speed USB device number 3 using ehci_hcd
[ 2.930033] usb 2-2: New USB device found, idVendor=0bda, idProduct=0138
[ 2.930047] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.930055] usb 2-2: Product: USB2.0-CRW
[ 2.930062] usb 2-2: Manufacturer: Generic
[ 2.930068] usb 2-2: SerialNumber: 20090516388200000
[ 3.344246] usb 6-1: new full speed USB device number 2 using ohci_hcd
[ 3.580596] usb 6-1: New USB device found, idVendor=148f, idProduct=2000
[ 3.580610] usb 6-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.580615] usb 6-1: Product: CSR BS8510
[ 3.704773] udev[302]: starting version 164
[ 3.956382] Bluetooth: Core ver 2.16
[ 3.956424] NET: Registered protocol family 31
[ 3.956428] Bluetooth: HCI device and connection manager initialized
[ 3.956434] Bluetooth: HCI socket layer initialized
[ 3.956437] Bluetooth: L2CAP socket layer initialized
[ 3.956515] Bluetooth: SCO socket layer initialized
[ 3.994217] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.994502] usbcore: registered new interface driver btusb
[ 4.197266] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 4.197279] ACPI: Power Button [PWRB]
[ 4.197437] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 4.201336] ACPI: Lid Switch [LID]
[ 4.201488] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.201499] ACPI: Power Button [PWRF]
[ 4.218488] wmi: Mapper loaded
[ 4.223365] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.292155] usbcore: registered new interface driver uas
[ 4.345353] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 4.393954] Initializing USB Mass Storage driver...
[ 4.394141] scsi1 : usb-storage 2-2:1.0
[ 4.394398] usbcore: registered new interface driver usb-storage
[ 4.394401] USB Mass Storage support registered.
[ 4.414272] ACPI: acpi_idle registered with cpuidle
[ 4.429488] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 4.464476] acpi device:02: registered as cooling_device2
[ 4.464725] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 4.464738] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.577485] ACPI: Battery Slot [BAT0] (battery present)
[ 4.587234] ACPI: AC Adapter [AC] (on-line)
[ 4.652206] hp_accel: laptop model unknown, using default axes configuration
[ 4.833738] Linux media interface: v0.10
[ 4.879121] Linux video capture interface: v2.00
[ 4.901046] uvcvideo: Found UVC 1.00 device CNFA033 (04f2:b236)
[ 4.924505] input: CNFA033 as
/devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input7
[ 4.924793] usbcore: registered new interface driver uvcvideo
[ 4.924798] USB Video Class driver (v1.0.0)
[ 5.003627] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 5.003720] HDA Intel 0000:00:01.1: irq 41 for MSI/MSI-X
[ 5.004234] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 5.092957] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 5.093061] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 5.099280] lis3lv02d: 8 bits 3DC sensor found
[ 5.211218] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:14.2/input/input8
[ 5.228610] input: HDA ATI SB Mic at Ext Right Jack as
/devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 5.228810] input: HDA ATI SB HP Out at Ext Right Jack as
/devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 5.267431] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps:
0xd04773/0xe40000/0x5a0400
[ 5.316780] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input11
[ 5.397453] scsi 1:0:0:0: Direct-Access Generic- Multi-Card 1.00
PQ: 0 ANSI: 0 CCS
[ 6.224755] sd 1:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84
GiB)
[ 6.226005] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.226021] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 6.226030] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 6.231509] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 6.261734] sdb: sdb1
[ 6.265000] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 6.265054] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 6.880427] input: ST LIS3LV02DL Accelerometer as
/devices/platform/lis3lv02d/input/input12
[ 6.880751] Registered led device: hp::hddprotect
[ 6.880772] hp_accel: driver loaded
[ 7.370933] Adding 8787548k swap on /dev/sda2. Priority:-1 extents:1
across:8787548k
[ 7.379528] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.687122] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.799337] loop: module loaded
[ 8.451440] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
(null)
[ 9.366521] fuse init (API version 7.16)
[ 11.166907] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input13
[ 12.061302] r8169 0000:01:00.0: eth0: link down
[ 12.061315] r8169 0000:01:00.0: eth0: link down
[ 12.063397] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.485795] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.485801] Bluetooth: BNEP filters: protocol multicast
[ 12.490914] Bluetooth: RFCOMM TTY layer initialized
[ 12.490924] Bluetooth: RFCOMM socket layer initialized
[ 12.490928] Bluetooth: RFCOMM ver 1.11
[ 12.548280] Bridge firewalling registered
[ 13.668912] r8169 0000:01:00.0: eth0: link up
[ 13.670486] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.051395] lp: driver loaded but no devices found
[ 14.229471] ppdev: user-space parallel port driver
[ 24.512032] eth0: no IPv6 routers present
[ 40.786395] UDF-fs: No VRS found
[ 40.786403] UDF-fs: Rescanning with blocksize 2048
[ 40.806435] UDF-fs: No VRS found
[ 40.806444] UDF-fs: No partition found (1)
[ 41.013127] ISOFS: Unable to identify CD-ROM format.
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan# lsmod
Module Size Used by
isofs 34960 0
udf 71212 0
crc_itu_t 12347 1 udf
parport_pc 22191 0
mperf 12411 0
ppdev 12725 0
cpufreq_userspace 12576 0
lp 17190 0
cpufreq_stats 12762 0
parport 31650 3 parport_pc,ppdev,lp
cpufreq_conservative 13147 0
cpufreq_powersave 12454 0
bridge 65614 0
stp 12392 1 bridge
rfcomm 32744 10
bnep 17424 2
binfmt_misc 12914 1
uinput 17392 1
fuse 61554 1
loop 22479 0
joydev 17138 0
snd_hda_codec_idt 53263 1
snd_hda_codec_hdmi 22174 1
snd_hda_intel 25946 1
snd_hda_codec 67865 3
snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 13148 1 snd_hda_codec
uvcvideo 57386 0
videodev 66266 1 uvcvideo
snd_pcm 67276 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
media 18148 1 videodev
snd_seq 44678 0
snd_timer 22658 2 snd_pcm,snd_seq
snd_seq_device 13155 1 snd_seq
tpm_tis 13125 0
hp_accel 21104 0
tpm 17756 1 tpm_tis
snd 52324 11
snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
tpm_bios 12903 1 tpm
v4l2_compat_ioctl32 16575 1 videodev
lis3lv02d 17723 1 hp_accel
evdev 17475 25
i2c_piix4 12536 0
ac 12624 0
processor 27431 2
battery 13109 0
video 17553 0
soundcore 13014 1 snd
psmouse 55199 0
usb_storage 43639 0
hp_wmi 13250 0
i2c_core 23766 2 videodev,i2c_piix4
k10temp 12611 0
sparse_keymap 12760 1 hp_wmi
power_supply 13475 2 ac,battery
uas 13151 0
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
serio_raw 12878 0
pcspkr 12579 0
input_polldev 12906 1 lis3lv02d
wmi 13202 1 hp_wmi
button 12895 0
btusb 17417 2
bluetooth 107224 23 rfcomm,bnep,btusb
rfkill 19014 4 hp_wmi,bluetooth
ext4 313064 2
mbcache 12930 1 ext4
jbd2 65105 1 ext4
crc16 12343 2 bluetooth,ext4
sd_mod 35644 4
crc_t10dif 12348 1 sd_mod
ohci_hcd 26362 0
r8169 37356 0
ahci 25089 3
libahci 22616 1 ahci
libata 151572 2 ahci,libahci
ehci_hcd 39487 0
thermal 17330 0
scsi_mod 161557 4 usb_storage,uas,sd_mod,libata
usbcore 127203 7 uvcvideo,usb_storage,uas,btusb,ohci_hcd,ehci_hcd
thermal_sys 17939 3 video,processor,thermal
mii 12675 1 r8169
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan#
root@ulises:/home/nan# lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] Device 1510
00:01.0 VGA compatible controller: ATI Technologies Inc Device 9802
00:01.1 Audio device: ATI Technologies Inc Device 1314
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Device 1512
00:05.0 PCI bridge: Advanced Micro Devices [AMD] Device 1513
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI
mode] (rev 40)
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev
40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
Function 7
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller (rev 06)
02:00.0 Network controller: RaLink Device 539f
root@ulises:/home/nan# ^C
root@ulises:/home/nan#
root@ulises:/home/nan# uname -r
2.6.39-bpo.2-amd64
root@ulises:/home/nan# lspci |grep Audio
00:01.1 Audio device: ATI Technologies Inc Device 1314
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
root@ulises:/home/nan# lsmod |grep hda
snd_hda_codec_idt 53263 1
snd_hda_codec_hdmi 22174 1
snd_hda_intel 25946 1
snd_hda_codec 67865 3
snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 13148 1 snd_hda_codec
snd_pcm 67276 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd 52324 11
snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
root@ulises:/home/nan# cd /proc/asound
root@ulises:/proc/asound# ls -l
total 0
dr-xr-xr-x 3 root root 0 ene 22 13:05 card0
dr-xr-xr-x 4 root root 0 ene 22 13:05 card1
-r--r--r-- 1 root root 0 ene 22 13:05 cards
-r--r--r-- 1 root root 0 ene 22 13:05 devices
lrwxrwxrwx 1 root root 5 ene 22 13:05 Generic -> card0
-r--r--r-- 1 root root 0 ene 22 13:05 hwdep
-r--r--r-- 1 root root 0 ene 22 13:05 modules
dr-xr-xr-x 2 root root 0 ene 22 13:05 oss
-r--r--r-- 1 root root 0 ene 22 13:05 pcm
lrwxrwxrwx 1 root root 5 ene 22 13:05 SB -> card1
dr-xr-xr-x 2 root root 0 ene 22 13:05 seq
-r--r--r-- 1 root root 0 ene 22 13:05 timers
-r--r--r-- 1 root root 0 ene 22 13:05 version
root@ulises:/proc/asound#
root@ulises:/proc/asound# cat cards
0 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xf0244000 irq 41
1 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xf0240000 irq 16
root@ulises:/proc/asound# cat card0/codec#1 |grep Codec
cat: card0/codec#1: No existe el fichero o el directorio
root@ulises:/proc/asound# cat card0/codec#1|grep Codec
cat: card0/codec#1: No existe el fichero o el directorio
root@ulises:/proc/asound# ls
card0 cards Generic modules pcm seq version
card1 devices hwdep oss SB timers
root@ulises:/proc/asound# cd card0
root@ulises:/proc/asound/card0# ls
codec#0 eld#0.0 id pcm3p
root@ulises:/proc/asound/card0# codec#0
bash: codec#0: no se encontró la orden
root@ulises:/proc/asound/card0# gedit codec#0
(gedit:4254): EggSMClient-WARNING **: Failed to connect to the session manager:
None of the authentication protocols specified are supported
root@ulises:/proc/asound/card0# cd..
bash: cd..: no se encontró la orden
root@ulises:/proc/asound/card0# cd ..
root@ulises:/proc/asound# cd card1
root@ulises:/proc/asound/card1# ls
codec#0 id pcm0c pcm0p
root@ulises:/proc/asound/card1# gedit codec#0
(gedit:4320): EggSMClient-WARNING **: Failed to connect to the session manager:
None of the authentication protocols specified are supported
root@ulises:/proc/asound/card1# codec#0|grep Codec
bash: codec#0: no se encontró la orden
root@ulises:/proc/asound/card1# codec#0|grep codec
bash: codec#0: no se encontró la orden
root@ulises:/proc/asound/card1# lsmod |grep hda_
snd_hda_codec_idt 53263 1
snd_hda_codec_hdmi 22174 1
snd_hda_intel 25946 1
snd_hda_codec 67865 3
snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 13148 1 snd_hda_codec
snd_pcm 67276 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd 52324 11
snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
root@ulises:/proc/asound/card1# codec#0|grep
bash: codec#0: no se encontró la orden
Modo de empleo: grep [OPCIÓN]... PATRÓN [FICHERO]...
Pruebe `grep --help' para más información.
root@ulises:/proc/asound/card1# ls
codec#0 id pcm0c pcm0p
root@ulises:/proc/asound/card1# gedit id
(gedit:4358): EggSMClient-WARNING **: Failed to connect to the session manager:
None of the authentication protocols specified are supported
root@ulises:/proc/asound/card1# gedit pcm0c
(gedit:4362): EggSMClient-WARNING **: Failed to connect to the session manager:
None of the authentication protocols specified are supported
cd pcm0c
root@ulises:/proc/asound/card1# cd pcm0c
root@ulises:/proc/asound/card1/pcm0c# ls
info sub0
root@ulises:/proc/asound/card1/pcm0c# gedit info
(gedit:4366): EggSMClient-WARNING **: Failed to connect to the session manager:
None of the authentication protocols specified are supported
root@ulises:/proc/asound/card1/pcm0c# cd sub0
root@ulises:/proc/asound/card1/pcm0c/sub0# ls
hw_params info prealloc prealloc_max status sw_params
root@ulises:/proc/asound/card1/pcm0c/sub0# gedit hw_params
(gedit:4372): EggSMClient-WARNING **: Failed to connect to the session manager:
None of the authentication protocols specified are supported
root@ulises:/proc/asound/card1/pcm0c/sub0#
Codec: ATI R6xx HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x1002aa01
Subsystem Id: 0x00aa0100
Revision Id: 0x100200
No Modem Function Group found
Default PCM:
rates [0x70]: 32000 44100 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=03, enabled=1
Connection: 1
0x02
Codec: IDT 92HD81B1X5
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x111d7605
Subsystem Id: 0x103c1611
Revision Id: 0x100105
No Modem Function Group found
Default PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Power-Map: 0x00
Node 0x0a [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x0001173c: IN OUT HP EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0421201f: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Grey
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x0c [Pin Complex] wcaps 0x400583: Stereo Amp-In
Control: name="Mic Jack Mode", index=0, device=0
ControlAmp: chs=0, dir=In, idx=0, ofs=0
Control: name="Mic Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00011734: IN OUT EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x04a12040: [Jack] Mic at Ext Right
Conn = 1/8, Color = Grey
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0d [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00010050: OUT EAPD Balanced
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0e [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x0f [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x10 [Pin Complex] wcaps 0x400500: Mono
Pincap 0x00000010: OUT
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Connection: 1
0x1a
Node 0x11 [Pin Complex] wcaps 0x400483: Stereo Amp-In
Control: name="Internal Mic Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000024: IN Detect
Pin Default 0xd5a30150: [Both] Mic at Int Top
Conn = ATAPI, Color = Unknown
DefAssociation = 0x5, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x12 [Vendor Defined Widget] wcaps 0xf00503: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Power: setting=D0, actual=D0
Connection: 1
0x20
Node 0x13 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=63
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="STAC92xx Analog", type="Audio", device=0
Amp-Out caps: N/A
Amp-Out vals: [0x7f 0x7f]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x14 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=63
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: N/A
Amp-Out vals: [0x6c 0x6c]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x15 [Audio Input] wcaps 0x1d0541: Stereo
Device: name="STAC92xx Analog", type="Audio", device=0
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x17
Processing caps: benign=0, ncoeff=0
Node 0x16 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x18
Processing caps: benign=0, ncoeff=0
Node 0x17 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Power: setting=D0, actual=D0
Connection: 7
0x0c 0x0e 0x0f 0x1b 0x11* 0x12 0x0a
Node 0x18 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Power: setting=D0, actual=D0
Connection: 7
0x0c* 0x0e 0x0f 0x1b 0x11 0x12 0x0a
Node 0x19 [Audio Selector] wcaps 0x300501: Stereo
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x1a [Audio Mixer] wcaps 0x200500: Mono
Power: setting=D0, actual=D0
Connection: 1
0x19
Node 0x1b [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
[0x97 0x97]
Power: setting=D0, actual=D0
Connection: 6
0x0c 0x0e 0x0f 0x13 0x14 0x0a
Node 0x1c [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x9f 0x9f]
Power: setting=D0, actual=D0
Connection: 1
0x1b
Node 0x1d [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power: setting=D0, actual=D0
Delay: 4 samples
Node 0x1e [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power: setting=D0, actual=D0
Delay: 4 samples
Node 0x1f [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1d
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000034: IN OUT Detect
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x21 [Beep Generator Widget] wcaps 0x70040c: Mono Amp-Out
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x00]
Power: setting=D0, actual=D0
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
