On Δευ, 2012-01-09 at 00:33 +1100, Scott Ferguson wrote: <snip>
> 1. Please enable usb-modeswitch logging by setting "EnableLogging=1" > it's the last option in the config file:- > # nano /etc/usb_modeswitch.conf > > 2. Then restart your computer, connect the modem. Done. > 3. Please take note of the LED colours and flash rate throughout and > post the results. There was a long pause at the beginning, then the green light flashed twice, a shorter pause, then the green light flashed twice again. Then at short intervals the blue or green light flashes once. I can't find any other pattern. > 4. Run the following for a few minutes then adding the output to the post:- > # cat /dev/USBtty1 | grep RSSI ^RSSI: 11 ^RSSI: 13 ^RSSI: 12 ^RSSI: 13 ^RSSI: 15 > 5. Please run the following and post it's output to paste.debian.org, > then put the link to the paste page into the post:- > $ dmesg | grep -i 'warn\|fail\|error\|usb\|tty';cat > /var/log/usb_modeswitch* paste.debian.net/151464 > >> Do you have a PIN set? > > Is that ^ a no?? I don't have a PIN set. <snip> > Thanks. > > I'll have a look at your post tomorrow. Shouldn't be too hard to fix. Again thank you. > > Cheers > -- > Iceweasel/Firefox extensions for finding answers to Debian questions:- > https://addons.mozilla.org/en-US/firefox/collections/Scott_Ferguson/debian/ > > -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1326057441.4682.66.camel@smyrna
