Thank You for Your time and answer, Arno: >I think this setup might need additional configuration on the outside, >because you need to add the same subnet route on your Internet >modem/router. I don't think qemu gives you NAT for free...
I've got such a problem w/ NATing: /sbin/iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -d ! 192.168.1.0/24 -j SNAT --to-source 192.168.0.2 Bad argument `192.168.1.0/24' Do You have any idea why iptables does not accept the ip nor the ip net? Then I went this way for NAT-ing but w/ no luck: iptables -t nat -A PREROUTING -i eth0 -s 192.168.0.2 -j DNAT --to-destination 192.168.1.10 iptables -t nat -A POSTROUTING -i eth0 -s 192.168.1.10 -j SNAT --to-source 192.168.0.2 iptables -A FORWARD -i eth0 -o tap0 -d 192.168.1.10 -j ACCEPT Also, on host I do: sysctl -w net.ipv4.ip_forward=1 route add -host 192.168.1.10 dev tap0 and on guest: route add -host 192.168.1.2 dev eth0 route add default gw 192.168.0.2 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ec160a7.d278cc0a.6f8d.ffffb...@mx.google.com
