had the same problem with my htc hero

so my recipe:
# mount /dev/sdc /media/smth
the result is some message, nothing is mounted, but AFTER this line

# mount /dev/sdc1 /media/smth
works well!


2011/9/26 Lisi <lisi.re...@gmail.com>

> Hello all!
>
> Where do I go from here?
>
> mount /dev/sdc1 /media/Distros/
> mount: special device /dev/sdc1 does not exist
> Tux:/home/lisi# dmesg | tail
> [10296.211252] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors
> (500108
> MB)
> [10296.211913] sd 3:0:0:0: [sdc] Write Protect is off
> [10296.211917] sd 3:0:0:0: [sdc] Mode Sense: 2f 08 00 00
> [10296.211921] sd 3:0:0:0: [sdc] Assuming drive cache: write through
> [10296.213409] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors
> (500108
> MB)
> [10296.214031] sd 3:0:0:0: [sdc] Write Protect is off
> [10296.214035] sd 3:0:0:0: [sdc] Mode Sense: 2f 08 00 00
> [10296.214038] sd 3:0:0:0: [sdc] Assuming drive cache: write through
> [10296.214047]  sdc: sdc1
> [10296.265961] sd 3:0:0:0: [sdc] Attached SCSI disk
> Tux:/home/lisi# mount dev/sdc1 /media/Distros
> mount: special device dev/sdc1 does not exist
> Tux:/home/lisi# mount
> /dev/hda1 on / type ext3 (rw,errors=remount-ro)
> tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
> proc on /proc type proc (rw,noexec,nosuid,nodev)
> sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
> procbususb on /proc/bus/usb type usbfs (rw)
> udev on /dev type tmpfs (rw,mode=0755)
> tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
> devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
> fusectl on /sys/fs/fuse/connections type fusectl (rw)
> /dev/sda1 on /home type ext3 (rw)
> Tux:/home/lisi# mount /dev/sdc /media/Distros
> mount: you must specify the filesystem type
> Tux:/home/lisi# mount /dev/sdc -t ext3 /media/Distros
> mount: wrong fs type, bad option, bad superblock on /dev/sdc,
>       missing codepage or helper program, or other error
>       In some cases useful info is found in syslog - try
>       dmesg | tail  or so
>
> This is the drive I said that I was having problems with. :-(  I suppose
> that
> it might be faulty, but I am more inclined to think that I have still not
> finally and fully succeeded in ridding myself of the Windows "locks".
>
> Lisi
>
>
> --
> To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmas...@lists.debian.org
> Archive: http://lists.debian.org/201109260853.25539.lisi.re...@gmail.com
>
>


-- 
С уважением,
Роман Новиков

Reply via email to