On Fri, 08 Jul 2011 21:16:17 +0200, Ralf Mardorf wrote: >> > > If you don't see any usable disks it >> > > might take a bit longer :) >> > >> > If don't see any disk is when you start sweating :-P > > No, as long as there wasn't a click-click noise before, I wouldn't > sweat, I wouldn't wait, but open the PC case and reconnect the SATA > cables ;). Usually the poltergeist disconnect SATA cables. Time to > change the connectors by those new SATA connectors with a clip, a friend > found out that poltergeists are to stupid to disconnect this modern SATA > connectors.
I'm afraid you didn't get it :-) When hard disks are connected to the controller and installer cannot detect the disks in there, that usually means that your controller has been setup as a RAID controller and kernel cannot even recognized them, so you will need to: a) Get/load an additional driver b) Change your RAID config to AHCI o SATA c) Load a most updated kernel d) Get a real hardware RAID card :-P Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.07.09.10.36...@gmail.com
