On Sat, Jun 11, 2011 at 3:08 PM, Camaleón <noela...@gmail.com> wrote:
> On Sat, 11 Jun 2011 14:14:31 +0200, Christian Simo wrote:
>
> > Hi all
> >
> > Sorry to response let!
>
> Please, keep the replies into the same thread, there is no need to open a
> new thread for every post :-)
>
> Sorry for that, I deleted by mistake the previous mails.
> > I was busy with my ISP:
> >
> > please see below the NAT configuration for my Cisco Router done by my
> > ISP:
>
> (...)
>
> Christian, having a computer connected to Internet 24 hours 365 days
> which provides remote services it can be very risky (and not only for you
> or your LAN but the whole of the Internet users) so I think you need
> first to get some of the basics about networking and routing to
> understand what is this all about and what do you need, at least for
> making your first tests.
>
> Thanks for this resume,
in fact, I set up a network using class A 10.0.0.0:
my LAN gateway is 10.0.0.2
n1.kom.co.za and ns2.kom.co.za are the hostnames for 10.0.0.80 and
10.0.0.82
this two debian machines are my DNS bind server.
Please below the interfaces files congigurations:
iface eth0 inet static
address 10.0.0.80
netmask 255.255.255.0
network 10.0.0.0
broadcast 10.0.0.255
gateway 10.0.0.2
# dns-* options are implemented by the resolvconf package, if
installed
dns-nameservers 196.28.80.139 196.28.80.140
dns-search ns1.kom.co.za ns2.kom.co.za
iface eth0 inet static
address 10.0.0.82
netmask 255.255.255.0
network 10.0.0.0
broadcast 10.0.0.255
gateway 10.0.0.2
# dns-* options are implemented by the resolvconf package, if
installed
dns-nameservers 196.28.80.139 196.28.80.140
dns-search ns1.kom.co.za ns2.kom.co.za
this below are my hosts files configurations for 10.0.0.80 and 10.0.0.82:
127.0.0.1 localhost
10.0.0.82 ns1.kom.co.za ns1
127.0.0.1 localhost
10.0.0.82 ns2.kom.co.za ns2
> I dunno how can we help you if we don't know what is your network layout,
> what routers/gateways/modems do you have configured at your site and what
> tests are you doing right know.
>
> The routers is a Cisco provide by my ISP and I got 4 switch D-LINK on
the network.
I said before, I planed to have two DNS server one as primary on 10.0.0.80
and another as slave on 10.0.0.82
my router IP is 41.134.19.89, 10.0.0.80 pointing on 41.134.19.90 with port
53 open and 10.0.0.82 pointing on 41.134.19.91 with ports 53 and 80 open.
See below my primary DNS configuration:
*File: /etc/bind/named.conf.local;*
zone "kom.co.za" IN {
type master;
file "/var/cache/bind/master.kom.co.za";
notify yes;
};
zone "0.0.10.in-addr.arpa" IN {
type master;
file "/var/cache/bind/kom.co.za.inv";
};
*File: /var/cache/bind/master.kom.co.za :*
$ORIGIN kom.co.za.
$TTL 861000
@ IN SOA ns1.kom.co.za. postmaster.kom.co.za. (
2011061001 ; serial
3600 ; refresh
900 ; retry
1209600 ; expire
13200) ; default_TTL
IN NS ns1.kom.co.za.
IN NS ns2.kom.co.za.
IN MX 10 mail.kom.co.za.
ns1 IN A 10.0.0.80
ns2 IN A 10.0.0.82
www IN A 10.0.0.81
sql IN A 10.0.0.81
mail IN A 10.0.0.84
backup IN A 10.0.0.102
ftp IN CNAME www
imap IN CNAME mail
pop IN CNAME mail
pop3 IN CNAME mail
smtp IN CNAME mail
img IN CNAME www
*File: /var/cache/bind/kom.co.za.inv *
$ORIGIN 0.0.10.in-addr.arpa.
$TTL 864000
@ IN SOA ns1.kom.co.za. postmaster.kom.co.za. (
201105311 ; serial
3600 ; refresh
900 ; retry
1209600 ; expire
43200) ; default_TTL
IN NS ns1.kom.co.za.
IN NS ns2.kom.co.za.
10.0.0.80. IN PTR ns1.kom.co.za.
10.0.0.82. IN PTR ns2.kom.co.za.
10.0.0.101. IN PTR sql.kom.co.za.
10.0.0.102. IN PTR backup.kom.co.za.
So please, let's concetrate in one service (dns server or http server or
> whatever you prefer) and now that your ISP has configured the routes to
> point to your local server you can start with your setup. So choose one
> service, configure it and put here any problems you have with that.
>
> When I tried to update kom.co.za domain from co.za. administrator domain,
I received this errors:
Syntax/Cross-Checking provided info for Nameserver at 6a: ns1.kom.co.za @
41.134.19.90
IPv4: 41.134.19.90 ==> 41-134-19-90.dsl.mweb.co.za.
FQDN: ns1.kom.co.za ==>
ERROR: Checking field 6a and running a Reverse check. "ns1.kom.co.za" not
found in "41-134-19-90.dsl.mweb.co.za."
! Whilst checking field 6a on the application form and whilst running a
Reverse check...
! you specified that "41.134.19.90" would map to "ns1.kom.co.za",
! but DNS returned "41-134-19-90.dsl.mweb.co.za."
Syntax/Cross-Checking provided info for Nameserver at 6e: ns2.kom.co.za @
41.134.19.91
IPv4: 41.134.19.91 ==> 41-134-19-91.dsl.mweb.co.za.
FQDN: ns2.kom.co.za ==>
ERROR: Checking field 6e and running a Reverse check. "ns2.kom.co.za" not
found in "41-134-19-91.dsl.mweb.co.za."
! Whilst checking field 6e on the application form and whilst running a
Reverse check...
! you specified that "41.134.19.91" would map to "ns2.kom.co.za",
! but DNS returned "41-134-19-91.dsl.mweb.co.za."
Thanks in advance
Greetings,
>
> --
> Camaleón
>
>
> --
> To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmas...@lists.debian.org
> Archive: http://lists.debian.org/pan.2011.06.11.13.08...@gmail.com
>
>
