Hi,
Yesterday i started using amavis and clamav besides fetchmail, exim4 and
spamd. However this seems to bog down my server (Pentium III-333 128 Mb)
I saw a lot of open exims and some open amavis programs.
I stopped both exim and amavis and removed the amavis router and transport
to put less strain on my server.
I then restart exim but still a lot of messages remain in
/var/spool/exim4/input. I then deleted all in /var/spool/exim4/msglog and
/var/spool/exim4/db because it seemd to contain some referrences to amavis.
It seemed to work as some more messages where processed but still a lot
of messages remain in /var/spool/exim4/input.
Also, it seems to retry to send mails very often and exim also complains
about possible mail loops. I have included my exim.conf but amavis
is already taken out of this.
1. How can i force exim to process,deliver and clean up the queue?
2. It also has problems with mail from my own pc [EMAIL PROTECTED]
The domain is called camelot, my pc is guinevere (192.168.0.10) and the
server is arthur (192.168.0.1 on eth1 and external ip on eth0).
It seems as if the rewrite is only done when is post as [EMAIL PROTECTED]
and not as [EMAIL PROTECTED]
I have filled in a correct "external" email in
/etc/exim4/email-addresses.
How can i force to rewrite the email address and thus not trigger an error
message from my isp that he doesn't know the [EMAIL PROTECTED]
email address?
(the messages are sent to my isp as [EMAIL PROTECTED])
3. Are there free scanners that work faster than clamavis?
I now had amavis open 2 children but that seemed waaay to slow. I then
tested once with 10 childeren but it didn't seem all that much better.
Thanks,
Benedict
=============== exim.conf (/var/lib/exim4/config.autogenerated)=============
#########
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# this file is generated dynamically from the files in
# CONFDIR/conf.d/ and /etc/exim4/update-exim4.conf.conf
# Any changes you make here will be lost.
# See /usr/share/doc/exim4-base/README.Debian and update-exim4.conf(8)
# for instructions of customization.
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
#########
exim_path = /usr/sbin/exim4
CONFDIR = /etc/exim4
MESSAGE_SIZE_LIMIT = 10M
.ifdef DC_minimaldns
primary_hostname = camelot
.else
.endif
domainlist local_domains = @:camelot:localhost:arthur.camelot:camelot
domainlist relay_to_domains =
hostlist relay_from_hosts = 127.0.0.1 : ::::1 : 192.168.0.0/24
qualify_domain = camelot
DCreadhost =
DCsmarthost = mail-out.pandora.be
local_interfaces = 127.0.0.1 : 127.0.0.1.10025 : 192.168.0.1
LOCAL_DELIVERY=maildir_home
gecos_pattern = ^([^,:]*)
gecos_name = $1
DCconfig_smarthost = 1
acl_smtp_rcpt = acl_check_rcpt
acl_smtp_data = acl_check_data
.ifndef DC_minimaldns
host_lookup = *
.endif
rfc1413_hosts = *
rfc1413_query_timeout = 30s
ignore_bounce_errors_after = 2d
timeout_frozen_after = 7d
freeze_tell = postmaster
trusted_users = uucp
never_users = root
begin acl
acl_whitelist_local_deny:
accept hosts = ${if exists{CONFDIR/local_host_whitelist}\
{CONFDIR/local_host_whitelist}\
{}}
accept senders = ${if exists{CONFDIR/local_sender_whitelist}\
{CONFDIR/local_sender_whitelist}\
{}}
acl_check_rcpt:
accept hosts = :
deny local_parts = [EMAIL PROTECTED]/|] : ^\\.
accept local_parts = postmaster
domains = +local_domains
deny message = sender envelope address $sender_address is locally blacklisted here.
If you think this is wrong, get in touch with postmaster
!acl = acl_whitelist_local_deny
senders = ${if exists{CONFDIR/local_sender_blacklist}\
{CONFDIR/local_sender_blacklist}\
{}}
deny message = sender IP address $sender_host_address is locally blacklisted here.
If you think this is wrong, get in touch with postmaster
!acl = acl_whitelist_local_deny
hosts = ${if exists{CONFDIR/local_host_blacklist}\
{CONFDIR/local_host_blacklist}\
{}}
accept domains = +local_domains
endpass
message = unknown user
verify = recipient
accept domains = +relay_to_domains
endpass
message = unrouteable address
verify = recipient
accept hosts = +relay_from_hosts
accept authenticated = *
deny message = relay not permitted
acl_check_data:
accept
begin routers
.ifdef DCconfig_internet
dnslookup_relay_to_domains:
driver = dnslookup
domains = ! +local_domains : +relay_to_domains
transport = remote_smtp
same_domain_copy_routing = yes
no_more
dnslookup:
driver = dnslookup
domains = ! +local_domains
transport = remote_smtp
same_domain_copy_routing = yes
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 192.168.0.0/16 :\
172.16.0.0/12 : 10.0.0.0/8 : 169.254.0.0/16
no_more
.endif
.ifdef DCconfig_local
nonlocal:
driver = redirect
allow_fail
data = :fail: Mailing to remote domains not supported
no_more
domains = ! +local_domains
.endif
.ifdef DCconfig_smarthost DCconfig_satellite
smarthost:
driver = manualroute
domains = ! +local_domains
transport = remote_smtp
route_list = * DCsmarthost
host_find_failed = defer
same_domain_copy_routing = yes
no_more
.endif
real_local:
debug_print = "R: real_local for [EMAIL PROTECTED]"
driver = accept
local_part_prefix = real-
check_local_user
transport = LOCAL_DELIVERY
system_aliases:
debug_print = "R: system_aliases for [EMAIL PROTECTED]"
driver = redirect
allow_fail
allow_defer
data = ${lookup{$local_part}lsearch{/etc/aliases}}
file_transport = address_file
pipe_transport = address_pipe
.ifdef DCconfig_satellite
hub_user:
debug_print = "R: hub_user for [EMAIL PROTECTED]"
driver = redirect
data = [EMAIL PROTECTED]
check_local_user
.endif
userforward:
debug_print = "R: userforward for [EMAIL PROTECTED]"
driver = redirect
check_local_user
file = $home/.forward
no_verify
no_expn
check_ancestor
allow_filter
directory_transport = address_directory
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
skip_syntax_errors
syntax_errors_to = [EMAIL PROTECTED]
syntax_errors_text = \
This is an automatically generated message. An error has\n\
been found in your .forward file. Details of the error are\n\
reported below. While this error persists, you will receive\n\
a copy of this message for every message that is addressed\n\
to you. If your .forward file is a filter file, or if it is\n\
a non-filter file containing no valid forwarding addresses,\n\
a copy of each incoming message will be put in your normal\n\
mailbox. If a non-filter file contains at least one valid\n\
forwarding address, forwarding to the valid addresses will\n\
happen, and those will be the only deliveries that occur.
spamcheck_router:
no_verify
check_local_user
condition = "${if and { {!def:h_X-Spam-Flag:} \
{!eq {$received_protocol}{spam-scanned}} \
} {1} {0}}"
driver = accept
transport = spamcheck
procmail:
debug_print = "R: procmail for [EMAIL PROTECTED]"
driver = accept
check_local_user
transport = procmail_pipe
require_files = ${local_part}:${home}/.procmailrc:+/usr/bin/procmail
no_verify
no_expn
maildrop:
debug_print = "R: maildrop for [EMAIL PROTECTED]"
driver = accept
check_local_user
transport = maildrop_pipe
require_files = ${local_part}:${home}/.mailfilter:+/usr/bin/maildrop
no_verify
no_expn
local_user:
debug_print = "R: local_user for [EMAIL PROTECTED]"
driver = accept
check_local_user
transport = LOCAL_DELIVERY
begin transports
address_file:
debug_print = "T: address_file for [EMAIL PROTECTED]"
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
address_pipe:
debug_print = "T: address_pipe for [EMAIL PROTECTED]"
driver = pipe
return_fail_output
address_reply:
debug_print = "T: autoreply for [EMAIL PROTECTED]"
driver = autoreply
mail_spool:
debug_print = "T: appendfile for [EMAIL PROTECTED]"
driver = appendfile
file = /var/mail/$local_part
delivery_date_add
envelope_to_add
return_path_add
group = mail
mode = 0660
mode_fail_narrower = false
maildir_home:
debug_print = "T: maildir_home for [EMAIL PROTECTED]"
driver = appendfile
directory = $home/Maildir
delivery_date_add
envelope_to_add
return_path_add
mode = 0600
mode_fail_narrower = false
maildir_format
maildrop_pipe:
debug_print = "T: maildrop_pipe for [EMAIL PROTECTED]"
driver = pipe
path = "/bin:/usr/bin:/usr/local/bin"
command = "/usr/bin/maildrop"
return_path_add
delivery_date_add
envelope_to_add
procmail_pipe:
debug_print = "T: procmail_pipe for [EMAIL PROTECTED]"
driver = pipe
path = "/bin:/usr/bin:/usr/local/bin"
command = "/usr/bin/procmail"
return_path_add
delivery_date_add
envelope_to_add
remote_smtp:
debug_print = "T: remote_smtp for [EMAIL PROTECTED]"
driver = smtp
hosts_try_auth = DCsmarthost
spamcheck:
debug_print = "T: spamassassin_pipe for [EMAIL PROTECTED]"
driver = pipe
command = /usr/sbin/exim4 -oMr spam-scanned -bS
use_bsmtp = true
transport_filter = /usr/bin/spamc
home_directory = /tmp
current_directory = /tmp
group = mail
user = mail
return_fail_output = true
return_path_add = false
message_prefix =
message_suffix =
address_directory:
debug_print = "T: address_directory for [EMAIL PROTECTED]"
driver = appendfile
envelope_to_add = true
return_path_add = true
check_string = ""
escape_string = ""
maildir_format
begin retry
* * F,2h,15m; G,16h,1h,1.5; F,4d,6h
begin rewrite
[EMAIL PROTECTED] ${lookup{${local_part}}lsearch{/etc/email-addresses}\
{$value}fail} Ffrs
[EMAIL PROTECTED] "${if exists {CONFDIR/email-addresses}\
{${lookup{${local_part}}lsearch{CONFDIR/email-addresses}\
{$value}fail}}fail}" Ffrs
.ifdef DCconfig_satellite
[EMAIL PROTECTED] [EMAIL PROTECTED] Ffr
.endif
begin authenticators
login:
driver = plaintext
public_name = LOGIN
client_send = ":
${extract{1}{::}{${lookup{$host}lsearch*{CONFDIR/passwd.client}{$value}fail}}} :
${extract{2}{::}{${lookup{$host}lsearch*{CONFDIR/passwd.client}{$value}fail}}}"
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
