On Mon, May 23, 2011 at 12:04 AM, David Parker <dpar...@utica.edu> wrote:
Was your onboard serial port disabled in the BIOS at the time you installed > Debian? If it was, then the first port on your serial card should be mapped > to /dev/ttyS0. If not, then udev may have picked up the onboard port as > /dev/ttyS0 and made your card /dev/ttyS1 (or another number). > No, originally the on-board serial device was enabled in the BIOS when I plopped the card in, I've since disabled it in the BIOS and sometimes now when I reboot this box, and run setserial, I will see either one or two serial devices listed. The on-board device always showed up with a low IRQ and the Serial card is IRQ16, so I was able to tell which device I was using. During my troubleshooting, before sending my initial email), I had set everything up to use ttyS0 and ttyS1 anyway, just to cover all my bases, but I still got no login when I tried to connect via serial. > > I have two Debian 4 boxes with the serial console working. It has been > quite a while since I set this up, but I'm pretty sure that I just added > this line to /etc/inittab and then restarted init: > > co:2345:respawn:/sbin/getty -L ttyS0 9600 vt102 > > I think the "co" may have something to do with it. Sorry I can't be more > help, I'm really rusty on this. I did this 5 years ago and I've never had > to do it again. > What does co do vs TO? Admittidly, I don't know much about how this works, so like a smart monkey, I did what I saw wrote about the most. Also, how are you restarting init w/o rebooting? -- > A: Yes. > >Q: Are you sure? > >>A: Because it reverses the logical flow of conversation. > >>>Q: Why is top posting frowned upon?
