On Sun, 21 Sep 2003 18:30:18 +0200, csj wrote: > Have you tried the cat > /proc trick, something like: > > cat using_dma:1 > /proc/ide/hdX/settings
In the case of a real IDE device, you can use the plain old IDE device nodes. My ide-scsi-driven CD-ROM drives (one burner, one reader) respond: # hdparm -d /dev/ide/host0/bus1/target?/lun0/generic /dev/ide/host0/bus1/target0/lun0/generic: using_dma = 1 (on) /dev/ide/host0/bus1/target1/lun0/generic: using_dma = 1 (on) (As you can see, I'm running devfs. The same thing should work with the traditional /dev/hdc and /dev/hdd devices.) > This works for my ide-scsi DVD-ROM drive. Then again maybe what you > need is the "scsitools" package: I don't think the SCSI layer is the problem. Probably, it's the USB driver or hardware. (Missing ehci module? USB1.1 port? USB1.1 cable between USB2.0 devices?) -- Best Regards, | Hi! I'm a .signature virus. Copy me into Sebastian | your ~/.signature to help me spread! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
