-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Since I have two DVD/CD rewritable drive units in two different boxes, it occurred to me to swap the two and see what would happen. Here is the result:
k...@sol:~/downloads$ wodim -v speed=2 dev=/dev/hda debian-507-i386-kde-CD-1.iso wodim: No write mode specified. wodim: Asuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. TOC Type: 1 = CD-ROM scsidev: '/dev/hda' devname: '/dev/hda' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.9 SCSI buffer size: 64512 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identification : 'DVD-RAM GSA-H55N' Revision : '1.03' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 (CD-R) Profile: 0x0012 (DVD-RAM) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) (current) Profile: 0x0008 (CD-ROM) Profile: 0x0002 (Removable disk) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1114112 = 1088 KB Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. Drive DMA Speed: 94870 kB/s 539x CD 68x DVD FIFO size : 12582912 = 12288 KB Track 01: data 647 MB Total size: 743 MB (73:41.98) = 331649 sectors Lout start: 744 MB (73:43/74) = 331649 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359846 (79:59/71) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359846 Blocks current: 359846 Blocks remaining: 28197 Speed set to 2822 KB/s Starting to write CD/DVD at speed 16.0 in real TAO mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 647 of 647 MB written (fifo 100%) [buf 91%] 16.2x. Track 01: Total bytes read/written: 679213056/679213056 (331647 sectors). Writing time: 292.020s Average write speed 15.1x. Min drive buffer fill was 90% Fixating... Fixating time: 18.373s wodim: fifo had 10699 puts and 10699 gets. wodim: fifo was 0 times empty and 10417 times full, min fill was 97%. k...@sol:~/downloads$ So, as can be seen, with the replacement drive unit everything was working as it should. The question now is why one drive would work but not the other. The working box has a Gigabyte GA-EP43-UD3L mainboard with an Intel dual core CPU. The operating system is Debian Lenny. The DVD/CD drive which worked is a LG model GSA-H55N dating from 2007-09-12. The one that did not work in this box is a Sony model DW-D26A dating from March 2005. Previously this drive was used and worked in an Intel P4 box, the mainboard of which was a DFI dating from before 2002. This box has been out of service for at least a year and is due to be recycled. In the Gigabyte box I had put the Sony drive instead of the LG one because I preferred the colour of the face plate on the former -- beige instead of black. It would seem that in this case practicality trumps aesthetics. I would still like to know why the Sony drive would not write (it did read) in the Gigabyte box and fix it if possible. Could it be a firmware problem? Regards, Ken Heard -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAk0ach4ACgkQlNlJzOkJmTcmvQCePpPWM/EDDz4sk4p7oK+rWxhm SLYAnj4fsh0cIDKqHpx4DCRztIxOW8Mx =71FG -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d1a721f.7000...@heard.name
