On Wed, 10 Nov 2010 14:53:30 +0800, Umarzuki Mochlis wrote: > I'm currently testing a fax server setup with hylafax but dumbfounded > when i found that the open source version does not support Primary Rate > Interface (PRI) despite the hardware capability Refer to > http://www.ifax.com/products/hylafax/hylafax.html#PS_HylaFAX_Comparison > (click on the "Hylafax Comparison" tab)
Uh? Do you need something special for you PRI line? As long as your hardware is supported by hylafax (active/passive isdn card) you're done. All my faxes are behind ISDN lines (BRI, S/T), while I'm using using analog outputs (with POTS modems) isdn cards should just work. HylaFAX was kinda forked/branched into HylaFAX+, you can also look in there, but AFAIK main difference between both is about how fast are features incorporated into new reelases (while hylafax is more conservative, hylafax+ is more active and adds enhancements quickly). > So now, other than Hylafax, is there any other open source fax server > that is available on Debian Lenny that supports PRI? > > The PRI that I mentioned is > http://en.wikipedia.org/wiki/Primary_Rate_Interface > > Thanks for any info. I'm not sure why that comparative table shows PRI is not compatible with hylafax, but better ask in Hylafax forums/mailing list and tell them the hardware you are wanting to use. They will provide you an accurate response :-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.11.10.10.26...@gmail.com
