see below. On Fri, Nov 5, 2010 at 11:07, Andrei Popescu <andreimpope...@gmail.com> wrote: > On Jo, 04 nov 10, 22:27:45, Kjetil brinchmann Halvorsen wrote: >> I have just installed lenny from cd-1 (5.0.6), but I cannot get wireless >> network >> to work. I have installed wicd from lenny-backports, and followed the >> instructions on >> the page >> http://wiki.debian.org/WiFi/HowToUse >> but wicd does not recognize the wireless network (which is there, >> I am sending this via it, from a live cd of ubuntu). > > My cristal ball says you are missing some firmware package specific to > your wireless card or you need a newer kernel. Please post the output of > 'lspci -nn' and 'dmesg | grep -i firmware' on the Lenny system. > output of lspci -nn : 00:00.0 RAM memory [0500]: nVidia Corporation MCP67 Memory Controller [10de:0547] (rev a2) 00:01.0 ISA bridge [0601]: nVidia Corporation MCP67 ISA Bridge [10de:0548] (rev a2) 00:01.1 SMBus [0c05]: nVidia Corporation MCP67 SMBus [10de:0542] (rev a2) 00:01.2 RAM memory [0500]: nVidia Corporation MCP67 Memory Controller [10de:0541] (rev a2) 00:01.3 Co-processor [0b40]: nVidia Corporation MCP67 Co-processor [10de:0543] (rev a2) 00:02.0 USB Controller [0c03]: nVidia Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2) 00:02.1 USB Controller [0c03]: nVidia Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2) 00:04.0 USB Controller [0c03]: nVidia Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2) 00:04.1 USB Controller [0c03]: nVidia Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2) 00:06.0 IDE interface [0101]: nVidia Corporation MCP67 IDE Controller [10de:0560] (rev a1) 00:07.0 Audio device [0403]: nVidia Corporation MCP67 High Definition Audio [10de:055c] (rev a1) 00:08.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Bridge [10de:0561] (rev a2) 00:09.0 IDE interface [0101]: nVidia Corporation MCP67 AHCI Controller [10de:0550] (rev a2) 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP67 Ethernet [10de:054c] (rev a2) 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:12.0 VGA compatible controller [0300]: nVidia Corporation GeForce 7150M [10de:0531] (rev a2) 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] 02:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) 02:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) 02:05.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12) 02:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12) 02:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
output od dmesg º grep -i `firmware` is nothing --- blank. I give the total (large) output of dmesg at the ver end of this message. Kjetil > Regards, > Andrei > -- > Offtopic discussions among Debian users and developers: > http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.10 (GNU/Linux) > > iQEcBAEBCAAGBQJM0+V+AAoJEHNWs3jeoi3phWIIALgfrrwshnPUPcVUMWIrlhrb > tTO2pZzGeTgWByMYQ3TfbMI7mF9mJwAaK0IQv5vrjz0rjQ8lJneQKoPWk+g302aQ > SnXV+ZP/46aSEl6ZjjrqRAmUfWUeniPbFYanUxUg31tMh1qfODtqkS1Daei8ZPmm > DhOvEogWh4tiH/kgSxnasqaR0T47GH0qHRdCq0pIuxTutV2MrXcvGlcHTAYQta+X > asqp9LIc0LbMlg2evCC6tCUZ707WsxzQa0zy1nbiqvUOuA/W80zMeHkpyU6/Km/3 > LlhSZFGHU1lT3znySgvbtYcYvfuRvMAV+HPXiEb3xJD+Bbq230xl817DPS2enTA= > =1kjw > -----END PGP SIGNATURE----- > > -- "If you want a picture of the future - imagine a boot stamping on the human face - forever." George Orwell (1984) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-25lenny1) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Sep 16 15:56:38 UTC 2010 [ 0.000000] Command line: root=UUID=7c58dea8-7e9f-4885-bc54-317fec47f06b ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bf50000 (usable) [ 0.000000] BIOS-e820: 000000007bf50000 - 000000007bf65000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bf65000 - 000000007bf66000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bf66000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 507728) 1 entries of 3200 used [ 0.000000] max_pfn_mapped = 1048576 [ 0.000000] init_memory_mapping [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F8250, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 7BF5C0CE, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP 7BF649BA, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 7BF5C13A, 880C (r1 NVIDIA MCP67 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 7BF65FC0, 0040 [ 0.000000] ACPI: TCPA 7BF64AAE, 0032 (r1 Phoeni x 6040000 TL 0) [ 0.000000] ACPI: SRAT 7BF64AE0, 00A0 (r1 AMD HAMMER 6040000 AMD 1) [ 0.000000] ACPI: SSDT 7BF64B80, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: MCFG 7BF64D86, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 7BF64DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC 7BF64DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7BF64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7BF64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] Entering add_active_range(0, 256, 507728) 1 entries of 3200 used [ 0.000000] NUMA: Allocated memnodemap from c000 - d080 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-000000007bf50000 [ 0.000000] NODE_DATA [000000000000d080 - 000000000001207f] [ 0.000000] bootmap [0000000000013000 - 00000000000227ef] pages 10 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS [ 0.000000] early res: 3 [37daa000-37fef478] RAMDISK [ 0.000000] early res: 4 [9e000-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-bfff] PGTABLE [ 0.000000] early res: 6 [c000-d07f] MEMNODEMAP [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 158 [ 0.000000] 0: 256 -> 507728 [ 0.000000] On node 0 totalpages: 507630 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1249 pages reserved [ 0.000000] DMA zone: 2693 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6886 pages used for memmap [ 0.000000] DMA32 zone: 496746 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 499439 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=7c58dea8-7e9f-4885-bc54-317fec47f06b ro quiet [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.000000] time.c: Detected 2000.187 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] Node 0: aperture @ c20000000 size 32 MB [ 0.004000] Aperture beyond 4GB. Ignoring. [ 0.004000] No AGP bridge found [ 0.004000] Memory: 1994668k/2030912k available (2228k kernel code, 35852k reserved, 1084k data, 392k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.083851] Calibrating delay using timer specific routine.. 4004.74 BogoMIPS (lpj=8009499) [ 0.083906] Security Framework initialized [ 0.083912] SELinux: Disabled at boot. [ 0.083915] Capability LSM initialized [ 0.084005] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.084005] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.084005] Mount-cache hash table entries: 256 [ 0.084005] Initializing cgroup subsys ns [ 0.084005] Initializing cgroup subsys cpuacct [ 0.084005] Initializing cgroup subsys devices [ 0.084005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084005] CPU: L2 Cache: 512K (64 bytes/line) [ 0.084005] CPU 0/0 -> Node 0 [ 0.084005] CPU: Physical Processor ID: 0 [ 0.084005] CPU: Processor Core ID: 0 [ 0.084005] ACPI: Core revision 20080321 [ 0.140516] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 0.140520] Using local APIC timer interrupts. [ 0.148009] APIC timer calibration result 12501177 [ 0.148009] Detected 12.501 MHz APIC timer. [ 0.148009] Booting processor 1/1 ip 6000 [ 0.156009] Initializing CPU#1 [ 0.156009] Calibrating delay using timer specific routine.. 4000.43 BogoMIPS (lpj=8000868) [ 0.156009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.156009] CPU: L2 Cache: 512K (64 bytes/line) [ 0.156009] CPU 1/1 -> Node 0 [ 0.156009] CPU: Physical Processor ID: 0 [ 0.156009] CPU: Processor Core ID: 1 [ 0.156009] AMD C1E detected late. Force timer broadcast. [ 0.235827] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 0.235849] Brought up 2 CPUs [ 0.235852] Total of 2 processors activated (8005.18 BogoMIPS). [ 0.236010] CPU0 attaching sched-domain: [ 0.236013] domain 0: span 0-1 [ 0.236014] groups: 0 1 [ 0.236014] domain 1: span 0-1 [ 0.236014] groups: 0-1 [ 0.236014] CPU1 attaching sched-domain: [ 0.236014] domain 0: span 0-1 [ 0.236014] groups: 1 0 [ 0.236014] domain 1: span 0-1 [ 0.236014] groups: 0-1 [ 0.236014] net_namespace: 1224 bytes [ 0.236014] Booting paravirtualized kernel on bare hardware [ 0.236014] NET: Registered protocol family 16 [ 0.236014] node 0 link 0: io port [1000, fffff] [ 0.236014] TOM: 0000000080000000 aka 2048M [ 0.236014] node 0 link 0: mmio [a0000, bffff] [ 0.236014] node 0 link 0: mmio [80000000, dfffffff] [ 0.236014] node 0 link 0: mmio [e0000000, efffffff] [ 0.236014] node 0 link 0: mmio [f0000000, fe0bffff] [ 0.236014] bus: [00,ff] on node 0 link 0 [ 0.236014] bus: 00 index 0 io port: [0, ffff] [ 0.236014] bus: 00 index 1 mmio: [a0000, bffff] [ 0.236014] bus: 00 index 2 mmio: [80000000, fcffffffff] [ 0.236014] ACPI: bus type pci registered [ 0.236014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4 [ 0.236014] PCI: MCFG area at e0000000 reserved in E820 [ 0.236014] PCI: Using MMCONFIG at e0000000 - e04fffff [ 0.236014] PCI: Using configuration type 1 for base access [ 0.236014] ACPI: EC: Look up EC in DSDT [ 0.239145] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.239911] ACPI: Interpreter enabled [ 0.239914] ACPI: (supports S0 S3 S4 S5) [ 0.239930] ACPI: Using IOAPIC for interrupt routing [ 0.239911] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.263912] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.263912] ACPI: EC: driver started in interrupt mode [ 0.263912] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.263913] PCI: Transparent bridge - 0000:00:08.0 [ 0.263913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.263913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.263913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.263913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.299915] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10 [ 0.299915] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 0.299915] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 0.299915] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 0.299915] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.299915] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.299915] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 0.299915] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 0.299915] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 0.299915] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 [ 0.299915] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 0.299915] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 [ 0.299915] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 [ 0.299915] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 [ 0.299915] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. [ 0.299915] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 [ 0.303915] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5 [ 0.303915] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10 [ 0.303915] ACPI: PCI Interrupt Link [LPMU] (IRQs *11) [ 0.303915] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.303915] pnp: PnP ACPI init [ 0.303915] ACPI: bus type pnp registered [ 0.303915] pnp 00:00: parse allocated resources [ 0.303915] pnp 00:00: add io 0xcf8-0xcff flags 0x1 [ 0.303915] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.303915] pnp 00:01: parse allocated resources [ 0.303915] pnp 00:01: add irq 8 flags 0x1 [ 0.303915] pnp 00:01: add mem 0xfed00000-0xfed003ff flags 0x0 [ 0.303915] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.303915] pnp 00:02: parse allocated resources [ 0.303915] pnp 00:02: add mem 0xe0000000-0xefffffff flags 0x1 [ 0.303915] pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.303915] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.303915] pnp 00:03: parse allocated resources [ 0.303915] pnp 00:03: add io 0x1000-0x107f flags 0x1 [ 0.303915] pnp 00:03: add io 0x1080-0x10ff flags 0x1 [ 0.303915] pnp 00:03: add io 0x1400-0x147f flags 0x1 [ 0.303915] pnp 00:03: add io 0x1480-0x14ff flags 0x1 [ 0.303915] pnp 00:03: add io 0x1800-0x187f flags 0x1 [ 0.303915] pnp 00:03: add io 0x1880-0x18ff flags 0x1 [ 0.303915] pnp 00:03: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.303915] pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.303915] pnp 00:04: parse allocated resources [ 0.303915] pnp 00:04: add io 0x10-0x1f flags 0x1 [ 0.303915] pnp 00:04: add io 0x22-0x3f flags 0x1 [ 0.303915] pnp 00:04: add io 0x44-0x5f flags 0x1 [ 0.303915] pnp 00:04: add io 0x63-0x63 flags 0x1 [ 0.303915] pnp 00:04: add io 0x65-0x65 flags 0x1 [ 0.303915] pnp 00:04: add io 0x67-0x6f flags 0x1 [ 0.303915] pnp 00:04: add io 0x72-0x73 flags 0x1 [ 0.303915] pnp 00:04: add io 0x74-0x7f flags 0x1 [ 0.303915] pnp 00:04: add io 0x80-0x80 flags 0x1 [ 0.303915] pnp 00:04: add io 0x84-0x84 flags 0x1 [ 0.303915] pnp 00:04: add io 0x91-0x93 flags 0x1 [ 0.303915] pnp 00:04: add io 0x97-0x9f flags 0x1 [ 0.303915] pnp 00:04: add io 0xa2-0xbf flags 0x1 [ 0.303915] pnp 00:04: add io 0xe0-0xef flags 0x1 [ 0.303915] pnp 00:04: add io 0x360-0x361 flags 0x1 [ 0.303915] pnp 00:04: add io 0x4d0-0x4d1 flags 0x1 [ 0.303915] pnp 00:04: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.303915] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.303915] pnp 00:05: parse allocated resources [ 0.303915] pnp 00:05: add io 0x0-0x8 flags 0x1 [ 0.303915] pnp 00:05: add io 0xa-0xf flags 0x1 [ 0.303915] pnp 00:05: add io 0x81-0x83 flags 0x1 [ 0.303915] pnp 00:05: add io 0x87-0x87 flags 0x1 [ 0.303915] pnp 00:05: add io 0x89-0x8b flags 0x1 [ 0.303915] pnp 00:05: add io 0x8f-0x8f flags 0x1 [ 0.303915] pnp 00:05: add io 0xc0-0xd1 flags 0x1 [ 0.303915] pnp 00:05: add io 0xd4-0xdf flags 0x1 [ 0.303915] pnp 00:05: add dma 4 flags 0x4 [ 0.303915] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.303915] pnp 00:06: parse allocated resources [ 0.303915] pnp 00:06: add io 0x61-0x61 flags 0x1 [ 0.303915] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.303915] pnp 00:07: parse allocated resources [ 0.303915] pnp 00:07: add io 0x70-0x71 flags 0x1 [ 0.303915] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.303915] pnp 00:08: parse allocated resources [ 0.303915] pnp 00:08: add io 0xf0-0xf1 flags 0x1 [ 0.303915] pnp 00:08: add irq 13 flags 0x1 [ 0.303915] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.303915] pnp 00:09: parse allocated resources [ 0.303915] pnp 00:09: add io 0x60-0x60 flags 0x1 [ 0.303915] pnp 00:09: add io 0x64-0x64 flags 0x1 [ 0.303915] pnp 00:09: add irq 1 flags 0x1 [ 0.303915] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.303915] pnp 00:0a: parse allocated resources [ 0.303915] pnp 00:0a: add irq 12 flags 0x1 [ 0.303915] pnp 00:0a: Plug and Play ACPI device, IDs SYN013b SYN0100 SYN0002 PNP0f13 (active) [ 0.307915] pnp 00:0b: parse allocated resources [ 0.307915] pnp 00:0b: add mem 0xffc00000-0xffffffff flags 0x0 [ 0.307915] pnp 00:0b: add mem 0xfec00000-0xfec00fff flags 0x1 [ 0.307915] pnp 00:0b: add mem 0xfee00000-0xfeefffff flags 0x1 [ 0.307915] pnp 00:0b: add mem 0xfed00000-0xfed00fff flags 0x1 [ 0.307915] pnp 00:0b: add mem 0x0-0xffffffffffffffff flags 0x10000001 [ 0.307915] pnp 00:0b: add mem 0xfef00000-0xfef00fff flags 0x1 [ 0.307915] pnp 00:0b: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c [ 0.307915] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.307915] pnp: PnP ACPI: found 12 devices [ 0.307915] ACPI: ACPI bus type pnp unregistered [ 0.307915] usbcore: registered new interface driver usbfs [ 0.307915] usbcore: registered new interface driver hub [ 0.307915] usbcore: registered new device driver usb [ 0.307915] PCI: Using ACPI for IRQ routing [ 0.323916] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.323916] hpet0: 3 32-bit timers, 25000000 Hz [ 0.323916] ACPI: RTC can wake from S4 [ 0.327945] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 0.327949] Could not switch to high resolution mode on CPU 0 [ 0.335941] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 0.335941] Could not switch to high resolution mode on CPU 1 [ 0.343932] pnp: the driver 'system' has been registered [ 0.343932] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.343932] system 00:02: driver attached [ 0.343932] system 00:03: ioport range 0x1000-0x107f has been reserved [ 0.343932] system 00:03: ioport range 0x1080-0x10ff has been reserved [ 0.343932] system 00:03: ioport range 0x1400-0x147f has been reserved [ 0.343932] system 00:03: ioport range 0x1480-0x14ff has been reserved [ 0.343932] system 00:03: ioport range 0x1800-0x187f has been reserved [ 0.343932] system 00:03: ioport range 0x1880-0x18ff has been reserved [ 0.343932] system 00:03: driver attached [ 0.343932] system 00:04: ioport range 0x360-0x361 has been reserved [ 0.343932] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.343932] system 00:04: driver attached [ 0.343932] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.343932] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.343932] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.343932] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.343932] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved [ 0.343932] system 00:0b: driver attached [ 0.343932] PCI: Bridge: 0000:00:08.0 [ 0.343932] IO window: disabled. [ 0.343932] MEM window: 0xf6100000-0xf61fffff [ 0.343932] PREFETCH window: disabled. [ 0.343932] PCI: Bridge: 0000:00:0c.0 [ 0.343932] IO window: 4000-4fff [ 0.343932] MEM window: 0xf2000000-0xf3ffffff [ 0.343932] PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff [ 0.343932] PCI: Bridge: 0000:00:0d.0 [ 0.343932] IO window: disabled. [ 0.343932] MEM window: 0xf6000000-0xf60fffff [ 0.343932] PREFETCH window: disabled. [ 0.343932] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 0.343932] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.343932] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.343932] NET: Registered protocol family 2 [ 0.387934] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.387934] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.387934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.387934] TCP: Hash tables configured (established 262144 bind 65536) [ 0.387934] TCP reno registered [ 0.403940] NET: Registered protocol family 1 [ 0.403940] checking if image is initramfs... it is [ 0.511929] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. [ 0.511935] Could not switch to high resolution mode on CPU 0 [ 0.511929] lapic is not functional. [ 0.511929] Could not switch to high resolution mode on CPU 1 [ 0.551928] Freeing initrd memory: 2325k freed [ 0.551928] Simple Boot Flag at 0x36 set to 0x1 [ 0.552843] audit: initializing netlink socket (disabled) [ 0.552843] type=2000 audit(1288965240.544:1): initialized [ 0.552843] Total HugeTLB memory allocated, 0 [ 0.552899] VFS: Disk quotas dquot_6.5.1 [ 0.552936] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.552986] msgmni has been set to 3900 [ 0.553138] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.553141] io scheduler noop registered [ 0.553143] io scheduler anticipatory registered [ 0.553145] io scheduler deadline registered [ 0.553163] io scheduler cfq registered (default) [ 0.553192] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.553359] pci 0000:00:07.0: Enabling HT MSI Mapping [ 0.553374] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.553389] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.553405] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.553420] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 0.553435] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.553449] pci 0000:00:12.0: Boot video device [ 0.553608] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.553629] assign_interrupt_mode Found MSI capability [ 0.553651] Allocate Port Service[0000:00:0c.0:pcie00] [ 0.553735] Allocate Port Service[0000:00:0c.0:pcie03] [ 0.553826] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.553845] assign_interrupt_mode Found MSI capability [ 0.553862] Allocate Port Service[0000:00:0d.0:pcie00] [ 0.553942] Allocate Port Service[0000:00:0d.0:pcie03] [ 0.557846] hpet_resources: 0xfed00000 is busy [ 0.557932] Linux agpgart interface v0.103 [ 0.557935] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 0.558335] pnp: the driver 'serial' has been registered [ 0.560571] brd: module loaded [ 0.560668] input: Macintosh mouse button emulation as /class/input/input0 [ 0.560803] pnp: the driver 'i8042 kbd' has been registered [ 0.560815] i8042 kbd 00:09: driver attached [ 0.560849] pnp: the driver 'i8042 aux' has been registered [ 0.560849] i8042 aux 00:0a: driver attached [ 0.560849] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.589003] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.589003] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.605871] mice: PS/2 mouse device common for all mice [ 0.605944] pnp: the driver 'rtc_cmos' has been registered [ 0.606022] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.606046] rtc0: alarms up to one year, y3k [ 0.606048] rtc_cmos 00:07: driver attached [ 0.606108] cpuidle: using governor ladder [ 0.606110] cpuidle: using governor menu [ 0.606115] No iBFT detected. [ 0.606530] TCP cubic registered [ 0.606533] NET: Registered protocol family 17 [ 0.606743] registered taskstats version 1 [ 0.606942] rtc_cmos 00:07: setting system clock to 2010-11-05 13:54:01 UTC (1288965241) [ 0.606951] Freeing unused kernel memory: 392k freed [ 0.623798] input: AT Translated Set 2 keyboard as /class/input/input1 [ 0.645509] Uniform Multi-Platform E-IDE driver [ 0.645515] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 0.647206] No dock devices found. [ 0.654671] SCSI subsystem initialized [ 0.661805] libata version 3.00 loaded. [ 0.664623] ahci 0000:00:09.0: version 3.0 [ 0.664992] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 0.664992] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 1.669022] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 1.669026] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part [ 1.669030] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 1.669394] scsi0 : ahci [ 1.669581] scsi1 : ahci [ 1.669692] scsi2 : ahci [ 1.669803] scsi3 : ahci [ 1.669926] ata1: SATA max UDMA/133 abar m8...@0xf6484000 port 0xf6484100 irq 1277 [ 1.669929] ata2: SATA max UDMA/133 abar m8...@0xf6484000 port 0xf6484180 irq 1277 [ 1.669932] ata3: SATA max UDMA/133 abar m8...@0xf6484000 port 0xf6484200 irq 1277 [ 1.669935] ata4: SATA max UDMA/133 abar m8...@0xf6484000 port 0xf6484280 irq 1277 [ 2.172998] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.172998] ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 8909, max UDMA/100 [ 2.172998] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.172998] ata1.00: configured for UDMA/100 [ 2.504990] ata2: SATA link down (SStatus 0 SControl 300) [ 2.836982] ata3: SATA link down (SStatus 0 SControl 300) [ 3.168986] ata4: SATA link down (SStatus 0 SControl 300) [ 3.168986] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 8909 PQ: 0 ANSI: 5 [ 3.193761] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 3.193860] ACPI: ACPI0007:00 is registered as cooling_device0 [ 3.193865] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.193865] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.193865] ACPI: ACPI0007:01 is registered as cooling_device1 [ 3.193865] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.193865] ACPI Exception (thermal-0377): AE_OK, No or invalid critical threshold [20080321] [ 3.285701] Driver 'sd' needs updating - please use bus_type methods [ 3.285813] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 3.285829] sd 0:0:0:0: [sda] Write Protect is off [ 3.285832] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.285854] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.285909] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 3.285921] sd 0:0:0:0: [sda] Write Protect is off [ 3.285923] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.285944] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.285947] sda: sda1 sda2 sda3 sda4 [ 3.314482] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.756678] PM: Starting manual resume from disk [ 3.804676] kjournald starting. Commit interval 5 seconds [ 3.804676] EXT3-fs: mounted filesystem with ordered data mode. [ 5.102933] udevd version 125 started [ 5.568656] input: Power Button (FF) as /class/input/input2 [ 5.628656] ACPI: Power Button (FF) [PWRF] [ 5.628656] input: Sleep Button (CM) as /class/input/input3 [ 5.692655] ACPI: Sleep Button (CM) [SLPB] [ 5.692655] input: Lid Switch as /class/input/input4 [ 5.724655] ACPI: Lid Switch [LID] [ 5.748654] ACPI: AC Adapter [ACAD] (on-line) [ 5.748654] input: Power Button (CM) as /class/input/input5 [ 5.788654] ACPI: Power Button (CM) [PWRB] [ 6.061009] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.061415] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 6.061425] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 6.061440] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 6.061443] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 6.061615] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 6.061636] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000 [ 6.118933] usb usb1: configuration #1 chosen from 1 choice [ 6.118971] hub 1-0:1.0: USB hub found [ 6.118983] hub 1-0:1.0: 7 ports detected [ 6.220998] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.221002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.221005] usb usb1: Product: OHCI Host Controller [ 6.221007] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd [ 6.221009] usb usb1: SerialNumber: 0000:00:02.0 [ 6.221456] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 [ 6.221459] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z018] -> GSI 18 (level, low) -> IRQ 18 [ 6.221473] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 6.221477] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 6.221531] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 6.221547] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000 [ 6.232654] ACPI: Battery Slot [BAT0] (battery present) [ 6.232654] ACPI: WMI: Mapper loaded [ 6.278943] usb usb2: configuration #1 chosen from 1 choice [ 6.278978] hub 2-0:1.0: USB hub found [ 6.278988] hub 2-0:1.0: 2 ports detected [ 6.380969] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.380973] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.380976] usb usb2: Product: OHCI Host Controller [ 6.380978] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd [ 6.380980] usb usb2: SerialNumber: 0000:00:04.0 [ 6.384648] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 6.384648] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 6.384648] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 6.384648] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 6.384648] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 6.384648] ehci_hcd 0000:00:02.1: debug port 1 [ 6.384648] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 6.384648] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 [ 6.458732] ricoh-mmc: Ricoh MMC Controller disabling driver [ 6.458735] ricoh-mmc: Copyright(c) Philip Langdale [ 6.496652] ACPI: device:25 is registered as cooling_device2 [ 6.496652] input: Video Bus as /class/input/input6 [ 6.524881] usb 1-2: new full speed USB device using ohci_hcd and address 2 [ 6.544646] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.544646] usb usb3: configuration #1 chosen from 1 choice [ 6.544646] hub 3-0:1.0: USB hub found [ 6.544646] hub 3-0:1.0: 7 ports detected [ 6.548653] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 6.604646] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 6.652645] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.652645] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.652645] usb usb3: Product: EHCI Host Controller [ 6.652645] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd [ 6.652645] usb usb3: SerialNumber: 0000:00:02.1 [ 6.652645] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 6.652645] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z019] -> GSI 22 (level, low) -> IRQ 22 [ 6.652645] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 6.652645] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 6.652645] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 [ 6.652645] ehci_hcd 0000:00:04.1: debug port 1 [ 6.652645] PCI: cache line size of 64 is not supported by device 0000:00:04.1 [ 6.652645] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400 [ 6.652645] input: PC Speaker as /class/input/input7 [ 6.667400] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.667503] usb usb4: configuration #1 chosen from 1 choice [ 6.667540] hub 4-0:1.0: USB hub found [ 6.667550] hub 4-0:1.0: 2 ports detected [ 6.773234] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.773234] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.773234] usb usb4: Product: EHCI Host Controller [ 6.773234] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd [ 6.773234] usb usb4: SerialNumber: 0000:00:04.1 [ 6.773234] NFORCE-MCP67: 0000:00:06.0 (rev a1) UDMA133 controller [ 6.773234] NFORCE-MCP67: IDE controller (0x10de:0x0560 rev 0xa1) at PCI slot 0000:00:06.0 [ 6.773234] NFORCE-MCP67: not 100% native mode: will probe irqs later [ 6.773234] NFORCE-MCP67: BIOS didn't set cable bits correctly. Enabling workaround. [ 6.773234] NFORCE-MCP67: IDE port disabled [ 6.773234] ide0: BM-DMA at 0x30c0-0x30c7 [ 6.773234] Probing IDE interface ide0... [ 6.816649] sdhci: Secure Digital Host Controller Interface driver [ 6.816649] sdhci: Copyright(c) Pierre Ossman [ 7.433984] usb 3-2: new high speed USB device using ehci_hcd and address 2 [ 7.524637] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000 [ 7.552637] hda: TSSTcorp CDDVDW TS-L632N, ATAPI CD/DVD-ROM drive [ 7.584637] usb 3-2: configuration #1 chosen from 1 choice [ 7.584637] usb 3-2: New USB device found, idVendor=04fc, idProduct=0c15 [ 7.584637] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 7.584637] usb 3-2: Product: USB to Serial-ATA bridge [ 7.584637] usb 3-2: Manufacturer: Sunplus Technology Co.,Ltd. [ 7.584637] usb 3-2: SerialNumber: CFD0CAF080000 [ 7.600636] input: SynPS/2 Synaptics TouchPad as /class/input/input8 [ 8.264630] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 8.264630] hda: MWDMA2 mode selected [ 8.264630] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 8.280629] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 8.280629] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 8.280629] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 8.280629] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 8.312629] usb 4-2: new high speed USB device using ehci_hcd and address 2 [ 8.472628] usb 4-2: configuration #1 chosen from 1 choice [ 8.476628] usb 4-2: New USB device found, idVendor=0408, idProduct=030c [ 8.476628] usb 4-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 8.476628] usb 4-2: Product: HP Webcam [ 8.476628] usb 4-2: Manufacturer: QCM [ 8.476628] usb 4-2: SerialNumber: SN0001 [ 8.800624] usb 1-4: new low speed USB device using ohci_hcd and address 3 [ 8.808625] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:87:4a:4a [ 8.808625] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 8.808625] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 8.808625] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 8.808625] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 8.889162] ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12) [ 8.889179] ricoh-mmc: Controller is now disabled. [ 8.889364] ohci1394 0000:02:05.0: enabling device (0100 -> 0102) [ 8.889748] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 8.889759] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 8.941910] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 8.945910] sdhci: SDHCI controller found at 0000:02:05.1 [1180:0822] (rev 22) [ 8.945910] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 8.945910] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 8.949910] mmc0: Will use DMA mode even though HW doesn't fully claim to support it. [ 8.949910] mmc0: SDHCI at 0xf6100800 irq 7 DMA [ 8.949910] Initializing USB Mass Storage driver... [ 8.953417] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 8.953430] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 19 [ 8.953439] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 8.953484] ath5k_pci 0000:03:00.0: registered as 'phy0' [ 8.958255] ath5k phy0: Support for RF2425 is under development. [ 8.996575] phy0: Selected rate control algorithm 'pid' [ 9.022343] usb 1-4: configuration #1 chosen from 1 choice [ 9.028201] usb 1-4: New USB device found, idVendor=04d9, idProduct=0499 [ 9.028201] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.164206] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 9.164206] Uniform CD-ROM driver Revision: 3.20 [ 9.276200] Linux video capture interface: v2.00 [ 9.277825] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 9.336199] usb 1-7: new full speed USB device using ohci_hcd and address 4 [ 9.556196] usb 1-7: configuration #1 chosen from 1 choice [ 9.560200] usb 1-7: New USB device found, idVendor=08ff, idProduct=2580 [ 9.560200] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 9.560200] usb 1-7: Product: Fingerprint Sensor [ 9.560200] scsi4 : SCSI emulation for USB Mass Storage devices [ 9.560200] usb-storage: device found at 2 [ 9.560203] usb-storage: waiting for device to settle before scanning [ 9.560200] usbcore: registered new interface driver usb-storage [ 9.560200] USB Mass Storage support registered. [ 9.564203] usbcore: registered new interface driver hiddev [ 9.564203] uvcvideo: Found UVC 1.00 device HP Webcam (0408:030c) [ 9.568201] input: HP Webcam as /class/input/input9 [ 9.600201] usbcore: registered new interface driver uvcvideo [ 9.600201] USB Video Class driver (v0.1.0) [ 9.608202] input: HID 04d9:0499 as /class/input/input10 [ 9.672196] input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:02.0-4 [ 9.672196] usbcore: registered new interface driver usbhid [ 9.672196] usbhid: v2.6:USB HID core driver [ 10.180191] Adding 3903784k swap on /dev/sda2. Priority:-1 extents:1 across:3903784k [ 10.218199] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0052200c01] [ 10.633471] EXT3 FS on sda1, internal journal [ 11.305464] loop: module loaded [ 12.265454] kjournald starting. Commit interval 5 seconds [ 12.273455] EXT3 FS on sda3, internal journal [ 12.273455] EXT3-fs: mounted filesystem with ordered data mode. [ 12.297454] kjournald starting. Commit interval 5 seconds [ 12.305454] EXT3 FS on sda4, internal journal [ 12.305454] EXT3-fs: mounted filesystem with ordered data mode. [ 13.389450] eth0: no link during initialization. [ 14.569431] usb-storage: device scan complete [ 14.569431] isa bounce pool size: 16 pages [ 14.573436] scsi 4:0:0:0: Direct-Access CSD CAW0 80S PQ: 0 ANSI: 2 [ 14.597431] sd 4:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 14.601431] sd 4:0:0:0: [sdb] Write Protect is off [ 14.601431] sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 14.601431] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 14.605431] sd 4:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 14.609431] sd 4:0:0:0: [sdb] Write Protect is off [ 14.609431] sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 14.609431] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 14.609431] sdb: sdb1 [ 14.609431] sd 4:0:0:0: [sdb] Attached SCSI disk [ 36.625281] pnp: the driver 'parport_pc' has been registered [ 36.625281] lp: driver loaded but no devices found [ 36.661318] ppdev: user-space parallel port driver [ 57.409128] NET: Registered protocol family 10 [ 57.409128] lo: Disabled Privacy Extensions [ 57.409128] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 220.783933] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1768.015105] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1808.097588] CPU0 attaching NULL sched-domain. [ 1808.097588] CPU1 attaching NULL sched-domain. [ 1808.113582] CPU0 attaching sched-domain: [ 1808.113582] domain 0: span 0-1 [ 1808.113582] groups: 0 1 [ 1808.113582] domain 1: span 0-1 [ 1808.113582] groups: 0-1 [ 1808.113582] CPU1 attaching sched-domain: [ 1808.113582] domain 0: span 0-1 [ 1808.113582] groups: 1 0 [ 1808.113582] domain 1: span 0-1 [ 1808.113582] groups: 0-1 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktix0qho9rm-+rxjjr-3v5q+p7falo+9rmd...@mail.gmail.com
