On Thursday, October 21, 2010 06:29:35 pm Camaleón wrote: > On Thu, 21 Oct 2010 07:56:19 +1000, GeraldCC wrote: > > (...) > > > It does seem to me, at least, the kernel does not really support Sata 3 > > out of the boxes. This is a new box, and I have just upgraded it to all > > Sata 3 drives. When it only had 1 Sata 3 drive and 2 Sata 2 drives it > > ran all Linuxes with no trouble. But then they were not running raid1. I > > will now try straight installations with no raid components and see if > > it changes the way systems work. I will have Sata 3 to Sata 2, but > > working in Sata 3 ports. > > Try to configure the SATA 3 host controller for using AHCI, if possible. > > > Certainly with a raid1 system all versions of Linux,if they run at all, > > do not work as expected!! > > Fakereaid (dmraid) is always problematic. Or by "raid1" you meant > "software" raid (mdraid) or "hardware" (dedicated controller) raid? > > Greetings, Hi, I am using software raid, pensions do not extend to buying real raid cards, using mdadm and palimset. After many re-installs and watching what I am doing, I finally have the system running. The system is set up to use AHCI. on all systems that support it. Many Thanks for answering my call, I am just restructuring, my systems to get the best method of using the computers that I have. Gerald
-- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201010221004.09633.gcsgcatl...@bigpond.com
