Stephen, This is the second time I have replied, but I don't see the
reply on the list, so here it goes again.
"Local" is in the /etc/modprobe.d directory; it has the right contents;
modprobe.conf does not exist; the "cat" command does show the contents of
the file, but I don't see anything that shows if it is plain text or not.
Here is a section out of the output of "lsmod" pertaining to loaded sound
modules:
snd_ca0106 27584 3
snd_ac97_codec 88452 1 snd_ca0106
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62660 4 snd_ca0106,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 2660 0
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18496 2 snd_ca0106,snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
I didn't see anything about snd_intel8x0 anywhere in the output.
Here is the output of dmesg:
[ 0.000000] ACPI: BOOT 000FCDDE, 0028 (r1 DELL 8400 7
ASL 61)
[ 0.000000] ACPI: MCFG 000FCE06, 003E (r1 DELL 8400 7
ASL 61)
[ 0.000000] ACPI: HPET 000FCE44, 0038 (r1 DELL 8400 7
ASL 61)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at d1000000 (gap:
d0000000:10000000)
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 844942
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2992.587 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.004000] Memory: 3368252k/3406384k available (1770k kernel code,
36968k reserved, 751k data, 244k init, 2488880k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba9a9 - 0xc0376620 ( 751 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba9a9 (1770 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083948] Calibrating delay using timer specific routine.. 5991.27
BogoMIPS (lpj=11982554)
[ 0.083990] Security Framework initialized
[ 0.083995] SELinux: Disabled at boot.
[ 0.083999] Capability LSM initialized
[ 0.084005] Mount-cache hash table entries: 512
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.084005] CPU: L2 cache: 1024K
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] Intel machine check architecture supported.
[ 0.084005] Intel machine check reporting enabled on CPU#0.
[ 0.084005] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.084005] CPU0: Thermal monitoring enabled
[ 0.084005] using mwait in idle threads.
[ 0.084005] Checking 'hlt' instruction... OK.
[ 0.100006] ACPI: Core revision 20080321
[ 0.144009] ENABLING IO-APIC IRQs
[ 0.144009] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.183714] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[ 0.184011] Booting processor 1/1 ip 6000
[ 0.192012] Initializing CPU#1
[ 0.192012] Calibrating delay using timer specific routine.. 5985.00
BogoMIPS (lpj=11970019)
[ 0.192012] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.192012] CPU: L2 cache: 1024K
[ 0.192012] CPU: Physical Processor ID: 0
[ 0.192012] Intel machine check architecture supported.
[ 0.192012] Intel machine check reporting enabled on CPU#1.
[ 0.192012] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.192012] CPU1: Thermal monitoring enabled
[ 0.272017] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[ 0.272017] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.276017] Brought up 2 CPUs
[ 0.276017] Total of 2 processors activated (11976.28 BogoMIPS).
[ 0.276017] CPU0 attaching sched-domain:
[ 0.276017] domain 0: span 0-1
[ 0.276017] groups: 0 1
[ 0.276017] domain 1: span 0-1
[ 0.276017] groups: 0-1
[ 0.276017] CPU1 attaching sched-domain:
[ 0.276017] domain 0: span 0-1
[ 0.276017] groups: 1 0
[ 0.276017] domain 1: span 0-1
[ 0.276017] groups: 0-1
[ 0.276017] net_namespace: 660 bytes
[ 0.276017] Booting paravirtualized kernel on bare hardware
[ 0.276017] NET: Registered protocol family 16
[ 0.276017] ACPI: bus type pci registered
[ 0.276017] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0
- 255
[ 0.276017] PCI: MCFG area at e0000000 reserved in E820
[ 0.276017] PCI: Using MMCONFIG for extended config space
[ 0.276017] PCI: Using configuration type 1 for base access
[ 0.276017] Setting up standard PCI resources
[ 0.192012] ACPI: EC: Look up EC in DSDT
[ 0.300380] ACPI: Interpreter enabled
[ 0.300384] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.300407] ACPI: Using IOAPIC for interrupt routing
[ 0.336977] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.337342] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
[ 0.337348] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6
GPIO
[ 0.337977] PCI: Transparent bridge - 0000:00:1e.0
[ 0.338011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.338497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.339089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.339378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[ 0.339667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 0.620182] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12
15)
[ 0.620182] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12
15)
[ 0.620182] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12
15)
[ 0.620182] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12
15) *0, disabled.
[ 0.620182] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12
15)
[ 0.620182] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12
15)
[ 0.620182] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12
15)
[ 0.620182] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12
15)
[ 0.620293] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.620293] pnp: PnP ACPI init
[ 0.620293] ACPI: bus type pnp registered
[ 0.648182] pnp: PnP ACPI: found 13 devices
[ 0.648182] ACPI: ACPI bus type pnp unregistered
[ 0.648182] PnPBIOS: Disabled by ACPI PNP
[ 0.648182] PCI: Using ACPI for IRQ routing
[ 0.653983] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.653991] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.655043] ACPI: RTC can wake from S4
[ 0.657979] Switched to high resolution mode on CPU 0
[ 0.658444] Switched to high resolution mode on CPU 1
[ 0.661956] system 00:01: ioport range 0x800-0x85f has been reserved
[ 0.661961] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 0.661965] system 00:01: ioport range 0x860-0x8ff could not be reserved
[ 0.661980] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.661984] system 00:0a: iomem range 0x100000-0xffffff could not be
reserved
[ 0.661988] system 00:0a: iomem range 0x1000000-0xcfe8cbff could not be
reserved
[ 0.661991] system 00:0a: iomem range 0xc0000-0xfffff could not be
reserved
[ 0.661995] system 00:0a: iomem range 0xfec00000-0xfecfffff could not
be reserved
[ 0.661998] system 00:0a: iomem range 0xfee00000-0xfeefffff could not
be reserved
[ 0.662002] system 00:0a: iomem range 0xfed20000-0xfed9ffff could not
be reserved
[ 0.662005] system 00:0a: iomem range 0xffb00000-0xffbfffff could not
be reserved
[ 0.662009] system 00:0a: iomem range 0xffc00000-0xffffffff could not
be reserved
[ 0.662017] system 00:0b: iomem range 0xe0000000-0xefffffff could not
be reserved
[ 0.662021] system 00:0b: iomem range 0xfeda0000-0xfedacfff has been
reserved
[ 0.693652] PCI: Bridge: 0000:00:01.0
[ 0.693652] IO window: d000-dfff
[ 0.693652] MEM window: 0xdfd00000-0xdfefffff
[ 0.693652] PREFETCH window: 0x00000000d0000000-0x00000000d7ffffff
[ 0.693652] PCI: Bridge: 0000:00:1c.0
[ 0.693652] IO window: disabled.
[ 0.693652] MEM window: 0xdfc00000-0xdfcfffff
[ 0.693652] PREFETCH window: disabled.
[ 0.693652] PCI: Bridge: 0000:00:1c.1
[ 0.693652] IO window: disabled.
[ 0.693652] MEM window: 0xdfb00000-0xdfbfffff
[ 0.693652] PREFETCH window: disabled.
[ 0.693652] PCI: Bridge: 0000:00:1e.0
[ 0.693652] IO window: c000-cfff
[ 0.693652] MEM window: disabled.
[ 0.693652] PREFETCH window: disabled.
[ 0.693652] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 0.693652] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.693652] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 0.693652] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.693652] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low)
-> IRQ 17
[ 0.693652] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.693652] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.693652] NET: Registered protocol family 2
[ 0.705733] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.706048] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.709652] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.709652] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.709652] TCP reno registered
[ 0.713760] NET: Registered protocol family 1
[ 0.713897] checking if image is initramfs... it is
[ 1.217654] Freeing initrd memory: 6071k freed
[ 1.217654] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[ 1.217654] Simple Boot Flag at 0x7a set to 0x1
[ 1.217654] audit: initializing netlink socket (disabled)
[ 1.217654] type=2000 audit(1266978750.208:1): initialized
[ 1.217941] highmem bounce pool size: 64 pages
[ 1.217941] Total HugeTLB memory allocated, 0
[ 1.217941] VFS: Disk quotas dquot_6.5.1
[ 1.217941] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.217941] msgmni has been set to 1730
[ 1.217941] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 1.217941] io scheduler noop registered
[ 1.217941] io scheduler anticipatory registered
[ 1.217941] io scheduler deadline registered
[ 1.217941] io scheduler cfq registered (default)
[ 1.217941] pci 0000:01:00.0: Boot video device
[ 1.217941] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.217941] assign_interrupt_mode Found MSI capability
[ 1.217941] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.217963] Allocate Port Service[0000:00:01.0:pcie03]
[ 1.217963] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.217963] assign_interrupt_mode Found MSI capability
[ 1.217963] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.217963] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.217963] Allocate Port Service[0000:00:1c.0:pcie03]
[ 1.221938] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.221938] assign_interrupt_mode Found MSI capability
[ 1.221938] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.221938] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.221938] Allocate Port Service[0000:00:1c.1:pcie03]
[ 1.221938] isapnp: Scanning for PnP cards...
[ 1.573523] isapnp: No Plug & Play device found
[ 1.580924] hpet_resources: 0xfed00000 is busy
[ 1.580924] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 1.580924] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.580924] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.584954] brd: module loaded
[ 1.584954] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
[ 1.584954] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 1.584954] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.584954] mice: PS/2 mouse device common for all mice
[ 1.584954] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.584954] rtc0: alarms up to one day
[ 1.584954] cpuidle: using governor ladder
[ 1.584954] cpuidle: using governor menu
[ 1.584954] No iBFT detected.
[ 1.584954] TCP cubic registered
[ 1.584954] NET: Registered protocol family 17
[ 1.584954] Using IPI No-Shortcut mode
[ 1.584954] registered taskstats version 1
[ 1.584954] rtc_cmos 00:05: setting system clock to 2010-02-24 02:32:31
UTC (1266978751)
[ 1.584954] Freeing unused kernel memory: 244k freed
[ 1.620955] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.684924] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.684924] ACPI: ACPI0007:01 is registered as cooling_device1
[ 2.165927] usbcore: registered new interface driver usbfs
[ 2.165927] usbcore: registered new interface driver hub
[ 2.174282] usbcore: registered new device driver usb
[ 2.178282] USB Universal Host Controller Interface driver v3.0
[ 2.178282] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low)
-> IRQ 21
[ 2.178282] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.178282] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.178282] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 2.178282] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
[ 2.178282] usb usb1: configuration #1 chosen from 1 choice
[ 2.178282] hub 1-0:1.0: USB hub found
[ 2.178282] hub 1-0:1.0: 2 ports detected
[ 2.279407] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.279414] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.279419] usb usb1: Product: UHCI Host Controller
[ 2.279423] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.279428] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.279478] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low)
-> IRQ 22
[ 2.279493] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.279499] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.279538] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 2.279574] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[ 2.281841] usb usb2: configuration #1 chosen from 1 choice
[ 2.281895] hub 2-0:1.0: USB hub found
[ 2.281906] hub 2-0:1.0: 2 ports detected
[ 2.288096] Uniform Multi-Platform E-IDE driver
[ 2.288107] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 2.376440] Floppy drive(s): fd0 is 1.44M
[ 2.385335] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.385344] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.385352] usb usb2: Product: UHCI Host Controller
[ 2.385358] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.385364] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.385504] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low)
-> IRQ 18
[ 2.385525] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.385534] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.385596] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 2.387398] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 2.387565] usb usb3: configuration #1 chosen from 1 choice
[ 2.387635] hub 3-0:1.0: USB hub found
[ 2.387647] hub 3-0:1.0: 2 ports detected
[ 2.392908] FDC 0 is a post-1991 82077
[ 2.490401] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.490406] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.490410] usb usb3: Product: UHCI Host Controller
[ 2.490412] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.490415] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.490472] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low)
-> IRQ 23
[ 2.490484] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 2.490488] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.490518] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
[ 2.490549] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[ 2.490639] usb usb4: configuration #1 chosen from 1 choice
[ 2.490679] hub 4-0:1.0: USB hub found
[ 2.490687] hub 4-0:1.0: 2 ports detected
[ 2.594378] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.594382] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.594385] usb usb4: Product: UHCI Host Controller
[ 2.594387] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.594390] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.594569] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low)
-> IRQ 21
[ 2.594584] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.594588] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.594617] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
[ 2.602274] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.602274] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 2.602274] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
[ 2.698273] usb 2-1: new low speed USB device using uhci_hcd and
address 2
[ 2.714283] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 2.714366] usb usb5: configuration #1 chosen from 1 choice
[ 2.714402] hub 5-0:1.0: USB hub found
[ 2.714412] hub 5-0:1.0: 8 ports detected
[ 2.774805] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 2.818388] usb usb5: New USB device found, idVendor=1d6b,
idProduct=0002
[ 2.818392] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.818395] usb usb5: Product: EHCI Host Controller
[ 2.818398] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 2.818400] usb usb5: SerialNumber: 0000:00:1d.7
[ 2.822772] ICH6: IDE controller (0x8086:0x266f rev 0x03) at PCI slot
0000:00:1f.1
[ 2.822772] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low)
-> IRQ 16
[ 2.822772] ICH6: not 100% native mode: will probe irqs later
[ 2.822772] ICH6: IDE port disabled
[ 2.822772] ide0: BM-DMA at 0xffa0-0xffa7
[ 2.822772] Probing IDE interface ide0...
[ 3.614224] hda: SONY DVD RW DRU-840A, ATAPI CD/DVD-ROM drive
[ 3.650120] usb 2-1: new low speed USB device using uhci_hcd and
address 3
[ 3.822112] usb 2-1: configuration #1 chosen from 1 choice
[ 3.835611] usb 2-1: New USB device found, idVendor=045e, idProduct=0040
[ 3.835617] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.835622] usb 2-1: Product: Microsoft Wheel Mouse Optical�
[ 3.835626] usb 2-1: Manufacturer: Microsoft
[ 4.066112] usb 3-1: new full speed USB device using uhci_hcd and
address 2
[ 4.086312] hdb: _NEC DVD+RW ND-3100AD, ATAPI CD/DVD-ROM drive
[ 4.142167] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.142312] hda: drive side 80-wire cable detection failed, limiting
max speed to UDMA33
[ 4.142315] hda: UDMA/33 mode selected
[ 4.142500] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.142574] hdb: UDMA/33 mode selected
[ 4.142689] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.142805] tg3.c:v3.92.1 (June 9, 2008)
[ 4.142824] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 4.142835] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 4.162501] eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI
Express) 10/100/1000Base-T Ethernet 00:11:11:45:8b:76
[ 4.162506] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1]
TSOcap[1]
[ 4.162510] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.258499] No dock devices found.
[ 4.271554] SCSI subsystem initialized
[ 4.291562] libata version 3.00 loaded.
[ 4.295565] ata_piix 0000:00:1f.2: version 2.12
[ 4.295565] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low)
-> IRQ 20
[ 4.295565] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.339932] usb 3-1: configuration #1 chosen from 1 choice
[ 4.377694] usb 3-1: New USB device found, idVendor=03f0, idProduct=0004
[ 4.377700] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4.377705] usb 3-1: Product: DeskJet 895C
[ 4.377708] usb 3-1: Manufacturer: Hewlett-Packard
[ 4.377712] usb 3-1: SerialNumber: MX02M1S0HCFB
[ 4.381660] usbcore: registered new interface driver hiddev
[ 4.399658] input: Microsoft Microsoft Wheel Mouse Optical� as
/class/input/input1
[ 4.407660] input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft
Wheel Mouse Optical�] on usb-0000:00:1d.1-1
[ 4.407660] usbcore: registered new interface driver usbhid
[ 4.407660] usbhid: v2.6:USB HID core driver
[ 4.459570] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.463538] scsi0 : ata_piix
[ 4.463538] scsi1 : ata_piix
[ 4.463538] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0
irq 20
[ 4.463538] ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8
irq 20
[ 4.627524] ata1.00: ATA-7: Maxtor 6Y160M0, YAR51HW0, max UDMA/133
[ 4.627524] ata1.00: 312500000 sectors, multi 8: LBA48
[ 4.743902] ata1.00: configured for UDMA/133
[ 4.909681] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y160M0
YAR5 PQ: 0 ANSI: 5
[ 4.984025] hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 4.984045] Uniform CD-ROM driver Revision: 3.20
[ 4.984025] hdb: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 5.004233] Driver 'sd' needs updating - please use bus_type methods
[ 5.004341] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors
(160000 MB)
[ 5.004364] sd 0:0:0:0: [sda] Write Protect is off
[ 5.004367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.004404] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.004476] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors
(160000 MB)
[ 5.004497] sd 0:0:0:0: [sda] Write Protect is off
[ 5.004500] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.004536] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.004542] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 5.056378] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.407307] PM: Starting manual resume from disk
[ 5.440179] kjournald starting. Commit interval 5 seconds
[ 5.440179] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.505935] udevd version 125 started
[ 7.267889] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 8.013165] input: Power Button (FF) as /class/input/input2
[ 8.075084] ACPI: Power Button (FF) [PWRF]
[ 8.075198] input: Power Button (CM) as /class/input/input3
[ 8.136167] ACPI: Power Button (CM) [VBTN]
[ 8.635981] input: PC Speaker as /class/input/input4
[ 8.804180] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low)
-> IRQ 17
[ 8.847395] intel_rng: Firmware space is locked read-only. If you can't
or
[ 8.847399] intel_rng: don't want to disable this in firmware setup,
and if
[ 8.847402] intel_rng: you are certain that your system has a functional
[ 8.847405] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 8.896857] usblp0: Disabling reads from problematic bidirectional
printer
[ 8.912859] usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2
vid 0x03F0 pid 0x0004
[ 8.912859] usbcore: registered new interface driver usblp
[ 9.163648] parport_pc 00:08: reported by Plug and Play ACPI
[ 9.163709] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 9.517324] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low)
-> IRQ 17
[ 9.517324] snd-ca0106: Model 1007 Rev 00000000 Serial 10071102
[ 9.867602] Adding 2650684k swap on /dev/sda7. Priority:-1 extents:1
across:2650684k
[ 10.139452] EXT3 FS on sda1, internal journal
[ 10.804379] loop: module loaded
[ 11.969336] kjournald starting. Commit interval 5 seconds
[ 11.993553] EXT3 FS on sda9, internal journal
[ 11.993561] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.035851] kjournald starting. Commit interval 5 seconds
[ 12.048070] EXT3 FS on sda8, internal journal
[ 12.048077] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.071357] kjournald starting. Commit interval 5 seconds
[ 12.075608] EXT3 FS on sda5, internal journal
[ 12.075614] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.095847] kjournald starting. Commit interval 5 seconds
[ 12.111846] EXT3 FS on sda6, internal journal
[ 12.111846] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.464984] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 15.464991] tg3: eth0: Flow control is off for TX and off for RX.
[ 15.923756] NET: Registered protocol family 10
[ 15.923756] lo: Disabled Privacy Extensions
[ 16.096323] lp0: using parport0 (interrupt-driven).
[ 16.116470] ppdev: user-space parallel port driver
[ 22.655561] Linux agpgart interface v0.103
[ 22.687563] [drm] Initialized drm 1.1.0 20060810
[ 22.716017] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 22.716030] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 22.716131] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 24.805900] [drm] Setting GART location based on new memory map
[ 24.805900] [drm] Loading R300 Microcode
[ 24.805900] [drm] Num pipes: 1
[ 24.805900] [drm] writeback test succeeded in 1 usecs
[ 37.493908] eth0: no IPv6 routers present
Here is the output of dpkg-query: alsa-base 1.0.17.dfsg-4 ALSA driver
configuration files.
Looks like the alsa utils is not installed.
The Intel audio controller is still listed along with the Creative Labs
audio controller in the "lspci" output: Intel Corp. 82801FR (ICH6 Family)
AC'97 Audio Controller.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/op.u8l9ohw6do2...@dimension8400
