Klistvud put forth on 12/25/2009 2:59 PM: > Dne, 25. 12. 2009 20:29:39 je Hartwig Atrops napisal(a): >> Hi. >> >> Why don't you mount the new disk on /home/merciadriluca/ ? >> > > I second that. To elaborate a little: it's quite common to copy the > entire contents of your current /home to a new disk or partition, and > then modify your fstab so as to mount the new disk (partition) as /home. > In order not to leave loose ends, before rebooting into the "new" /home > you should also rename your old /home to (say) /home.old and create the > new mount point /home on your current drive. It may be necessary to do > so from a live CD (or by booting into single-user (root) mode), if your > current /home can't be renamed on-the-fly.
I did almost exactly the above scenario recently. On my Postfix firewall/gateway+www+ftp server I migrated my entire system+data disk, a 40GB Seagate EIDE to a new 500GB WD SATA disk. With the original system setup, home directories and everything but /boot were on a single ~35GB partition. On the new disk, I duplicated the two partition sizes on the old disk, 100MB /boot and ~35GB /, along with a 1GB swap partition. I also created a new 100GB partition for home directories. After formatting the partitions, I copied everything over to the proper new locations with "cp -a" then modified /etc/fstab accordingly on the new disk, ran LILO to put an MBR on the new disk, powered down the system, removed the old disk, powered up, and /home was now on it's new 100GB partition. There are many ways to skin this cat, this is but one. -- Stan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
