Hello,
I've configured a software raid 1 on two sata drives, using a single
partition on each drive to create the array. When transferring large
files (100 to 1500mb) to the mount point using scp the transfer almost
always results in a corrupt file, by which I mean that the md5sum of the
file doesn't match the source.
I'm able to rm the file and transfer it again and it then seems to work
fine.
I've run fsck.ext3 on the md device and the raid itself shows clean.
This machine is just being built and tested so I can delete files, kill
the raid, etc as needed to troubleshoot the problem.
Any ideas?
/dev/md1:
Version : 00.90
Creation Time : Fri Jun 26 13:00:21 2009
Raid Level : raid1
Array Size : 488383936 (465.76 GiB 500.11 GB)
Used Dev Size : 488383936 (465.76 GiB 500.11 GB)
Raid Devices : 2
Total Devices : 2
Preferred Minor : 1
Persistence : Superblock is persistent
Update Time : Wed Jul 8 06:25:34 2009
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
UUID : ad2cec31:2053319c:eb15f7e1:187cf839 (local to host ord)
Events : 0.26
Number Major Minor RaidDevice State
0 8 1 0 active sync /dev/sda1
1 8 17 1 active sync /dev/sdb1
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
