Hello! We have a SunBlade T6300 running a 2.6.26-2-sparc64-smp and equipped with an Emulex Zephyr-X LightPulse Fibre Channel Host Adapter. I'm trying to connect to a Sun StoreEdge 3510 with five scsi discs.
Machine seems to detect card an load the lpfc driver: 03: PCI 7700.0: 0c04 Fibre Channel [Created at pci.310] Unique ID: AJow.gMJ098VXYf0 Parent ID: Q8Dg.ZhzrP9eGT_A SysFS ID: /devices/pci0000:02/0000:02:00.0/0000:03:09.0/0000:77:00.0 SysFS BusID: 0000:77:00.0 Hardware Class: storage Model: "Emulex Zephyr-X LightPulse Fibre Channel Host Adapter" Vendor: pci 0x10df "Emulex Corporation" Device: pci 0xfc20 "Zephyr-X LightPulse Fibre Channel Host Adapter" SubVendor: pci 0x10df "Emulex Corporation" SubDevice: pci 0xfc2e Revision: 0x02 Driver: "lpfc" Driver Modules: "lpfc" Memory Range: 0x20300000-0x20301fff (rw,non-prefetchable) Memory Range: 0x20302000-0x20303fff (rw,non-prefetchable) I/O Ports: 0x4001000-0x40010ff (rw,disabled) Memory Range: 0x20340000-0x2037ffff (ro,non-prefetchable,disabled) IRQ: 19 (709 event Module Alias: "pci:v000010DFd0000FC20sv000010DFsd0000FC2Ebc0Csc0 4i00" Driver Info #0: Driver Status: lpfc is active Driver Activation Cmd: "modprobe lpfc" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (PCI bridge)cat /proc/scsi/scsi !!! However, the discs appear as five separate devices: 24: SCSI 00.0: 10600 Disk [Created at block.234] Unique ID: TGKD.v8v+Gwv2mP4 Parent ID: AJow.gMJ098VXYf0 SysFS ID: /block/sdb SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:02/0000:02:00.0/0000:03:09.0/0000:77:00.0/host0/rport-0:0-0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "FUJITSU MAX3073FCSUN72G" Vendor: "FUJITSU" Device: "MAX3073FCSUN72G" Revision: "1103" Serial ID: "000743F04GL0 DUC0P7A04GL0" Driver: "lpfc", "sd" Driver Modules: "lpfc" Device File: /dev/sdb (/dev/sg3) Device Files: /dev/sdb, /dev/disk/by-id/scsi-3500000e0182a7a60, /dev/disk/by-path/pci-0000:77:00.0-fc-0x500000e0182a7a62:0x0000000000000000 Device Number: block 8:16-8:31 (char 21:3) Geometry (Logical): CHS 8924/255/63 Size: 143374738 sectors a 512 bytes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #2 (Fibre Channel) !!!and so forth up to /dev/sdf. I thougth I needed to create an iscsi-target and a LUN so I've been messing around with iscsitarget, ietadm (I couldn't find tgt for my distro) and so forth without any success. Emulex only supply drivers and firmware as rpm's for i686/amd64. Now I'm confused and wonder if I'm on the right track at all? Any help would be appreciated. -- ****************************************************************** Sten Ring Bozoka.com Svenska AB Tegnérgatan 28, 2tr 113 59 Stockholm Tel 46-8-545 068 07 Mob 46-701-84 84 87 AIM:stenringbozoka www.bozoka.com www.multimobil.se
