Unit has 1G ram 6x 18G drives configured as following: 2 as raid 1 partitioned 500M /boot 10G / 5G /usr and remainder as swap ~1G
4 drives in raid 5 as a /svr Discs are connected to the Perc2/SC controller, primary on board controller is set to disabled, secondary on board controller has CD-ROM drive attached. Install was uneventful wend well, no error messages. Upon reboot there is a message: At about 4 seconds into the boot: i2o:iop0: Unable to start controller. Then after 60 seconds a stack trace: Null pointer exception. If someone could give me pointers that would be great. If you need the entire text of the stack trace I will have to copy it by hand. Install media was Debian 5.0 CD1 Kernel installed was linux-image-2.6.26-2-686. This is my first foray into propper server hardware - be it very old so any advice is welcomed. Adrian -- 24x7x365 != 24x7x52 Stupid or bad maths? <erno> hm. I've lost a machine.. literally _lost_. it responds to ping, it works completely, I just can't figure out where in my apartment it is. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
