--- Henning Moll <[EMAIL PROTECTED]> escribió: > Hi! > > if i do a > > modprobe usb-uhci > > i get the following in my /var/log/messages: > > | Aug 23 18:49:47 mothership kernel: usb.c: USB device 2 (vend/prod > | 0x4a9/0x2208) is not claimed by any active driver. > > kernel: usb-uhci.c: $Revision: 1.275 $ time 13:42:01 Apr 14 2002 > kernel: usb-uhci.c: High bandwidth mode enabled > kernel: usb-uhci.c: USB UHCI at I/O 0xac00, IRQ 10 > kernel: usb-uhci.c: Detected 2 ports > kernel: usb.c: new USB bus registered, assigned bus number 1 > kernel: hub.c: USB hub found > kernel: hub.c: 2 ports detected > kernel: usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 10 > kernel: usb-uhci.c: Detected 2 ports > kernel: hub.c: USB new device connect on bus1/2, assigned device number 2 > kernel: usb.c: new USB bus registered, assigned bus number 2 > kernel: hub.c: USB hub found > kernel: hub.c: 2 ports detected > kernel: usb.c: USB device 2 (vend/prod 0x4a9/0x2208) is not claimed by any > active driver. > kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver > > Hmm, so the system is able to retrieve the manufactor-id and product-id. So, > usb is working in some way... > > But there is no /proc/bus/usb/devices and programs like gphoto do not work... > > Any suggestions? > Henning >
I had the same exact problem a while back. The trick is to make sure that you also have these modules loaded: sd_mod sr_mod sg_mod (I think that is what the three are called, I am going from memory) usb-storage -Roberto ___________________________________________________ Yahoo! Messenger - Nueva versión GRATIS Super Webcam, voz, caritas animadas, y más... http://messenger.yahoo.es -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
