Please don't top post. I have rewritten this to conform to suggested list standard and replied at bottom.
Kousik Maiti: > In my system there are two ethernet card. I can't ping to other machine > via eth0 but eth1 is working fine. My ethernat controller is Ethernet > controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet > (rev 12) It is the output from lspci . Can anybody help??? > Marc Shapiro: >> This may seem trivial, but is the other box that you are trying to ping >> on a local network, or on the Net? If your NICs are set up with one to >> the Net and the second one to a local network then you are only going to >> be able to ping local machines on the second NIC and use the first to >> connect to machines outside the local net. >> Kousik Maiti: >>> Both are connected with Net. >>> I think you need to explain a bit better. To me it looks like you are saying both of your interface cards are connected to the Internet (If I understand Marc correctly he's using an common abbreviation for Internet, Net) Do you really mean both cards are connected to the Internet, if so, tell us a bit more about how you have them connected. Are both of your interface cards the same type broadcom card? There is also the chance that udev has identified a single card as, first eth0 and, second eth1 but that is not what you seem to be saying. Someone here can probably provide you with a useful answer if you first clarify. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
