I have a (old) Pentium 75 that used to run Etch. I have been trying to
install Lenny on it without success. The installation stops at the 6%
point of the "Installation of Base System" step. Various packages are
being retrieved at that point. At different times, the installation has
stopped while it was getting dpkg, coreutils, bdsutils, and libselinux1.
When the installation stalls, I can't get CTRL-ALT-F4 to open another
console, so I can't tell exactly what was going on.
I have tried both the Lenny debian-500-i386-CD-1.iso and the
debian-500-i386-netinst.iso. Neither works. The disks have been used to
install Lenny on other machines, so I know that they are not the
problem.
Any ideas to diagnose what is going on or to get the installation to
complete would be appreciated. The output of lshw (from the System
Rescue CD) is below.
Thank you.
debian
description: Computer
width: 32 bits
*-core
description: Motherboard
physical id: 2
*-memory
description: System memory
physical id: 0
size: 128MB
*-cpu
product: Pentium 75 - 200
vendor: Intel Corp.
physical id: 1
bus info: c...@0
version: 5.2.5
size: 100MHz
width: 32 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr mce cx8
*-pci
description: Host bridge
product: 85C501/2
vendor: Silicon Integrated Systems [SiS]
physical id: 100
bus info: p...@00:00.0
version: 00
width: 32 bits
clock: 33MHz
*-isa
description: ISA bridge
product: SiS85C503/5513 (LPC Bridge)
vendor: Silicon Integrated Systems [SiS]
physical id: 1
bus info: p...@00:01.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-ide UNCLAIMED
description: IDE interface
product: PCI0640
vendor: Silicon Image, Inc.
physical id: 6
bus info: p...@00:06.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: ide
configuration: latency=0
*-display
description: VGA compatible controller
product: GD 5434-8 [Alpine]
vendor: Cirrus Logic
physical id: 7
bus info: p...@00:07.0
version: fc
size: 16MB
width: 32 bits
clock: 33MHz
capabilities: vga
configuration: latency=0
resources: iomemory:81000000-81ffffff
*-usb:0
description: USB Controller
product: USB
vendor: NEC Corporation
physical id: 11
bus info: p...@00:11.0
version: 41
width: 32 bits
clock: 33MHz
capabilities: ohci bus_master cap_list
configuration: driver=ohci_hcd latency=64 maxlatency=42
mingnt=1
resources: iomemory:82000000-82000fff irq:10
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.18-6-486 ohci_hcd
physical id: 1
bus info: u...@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=3
speed=12.0MB/s
*-usb:1
description: USB Controller
product: USB
vendor: NEC Corporation
physical id: 11.1
bus info: p...@00:11.1
version: 41
width: 32 bits
clock: 33MHz
capabilities: ohci bus_master cap_list
configuration: driver=ohci_hcd latency=64 maxlatency=42
mingnt=1
resources: iomemory:82001000-82001fff irq:10
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.18-6-486 ohci_hcd
physical id: 1
bus info: u...@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2
speed=12.0MB/s
*-usb:2
description: USB Controller
product: USB 2.0
vendor: NEC Corporation
physical id: 11.2
bus info: p...@00:11.2
version: 02
width: 32 bits
clock: 33MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci_hcd latency=132 maxlatency=34
mingnt=16
resources: iomemory:82002000-820020ff irq:10
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.18-6-486 ehci_hcd
physical id: 1
bus info: u...@3
logical name: usb3
version: 2.06
capabilities: usb-2.00
configuration: driver=hub maxpower=0mA slots=5
speed=480.0MB/s
*-network
description: Ethernet interface
product: VT86C100A [Rhine]
vendor: VIA Technologies, Inc.
physical id: 13
bus info: p...@00:13.0
logical name: eth0
version: 06
serial: 00:50:ba:cb:c9:aa
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: bus_master ethernet physical tp mii 10bt
10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes
driver=via-rhine driverversion=1.4.1 duplex=full ip=192.168.1.84
latency=200 link=yes maxlatency=152 mingnt=118 multicast=yes port=MII
speed=100MB/s
resources: ioport:3000-307f iomemory:82002100-8200217f
irq:10
*-ide:0
description: IDE Channel 0
physical id: 0
bus info: i...@0
logical name: ide0
*-disk
description: ATA Disk
product: WDC AC24300L
vendor: Western Digital
physical id: 0
bus info: i...@0.0
logical name: /dev/hda
version: 09.09M08
serial: WD-WM4111064157
size: 4112MB
capacity: 4112MB
capabilities: ata dma lba iordy smart pm partitioned
partitioned:dos
configuration: smart=on
*-volume:0
description: Linux filesystem partition
physical id: 1
bus info: i...@0.0,1
logical name: /dev/hda1
capacity: 3875MB
capabilities: primary bootable
*-volume:1
description: Extended partition
physical id: 2
bus info: i...@0.0,2
logical name: /dev/hda2
size: 235MB
capacity: 235MB
capabilities: primary extended partitioned
partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/hda5
capacity: 235MB
capabilities: nofs
*-ide:1
description: IDE Channel 1
physical id: 1
bus info: i...@1
logical name: ide1
*-cdrom
description: DVD reader
product: LITE-ON COMBO SOHC-5236V
physical id: 0
bus info: i...@1.0
logical name: /dev/hdc
version: R$09
serial: 2005081700009134
capabilities: packet atapi cdrom removable nonmagnetic dma lba
iordy audio cd-r cd-rw dvd
*-disc
physical id: 0
logical name: /dev/hdc
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
