On Wednesday 20 August 2003 11:47, Shaul Karl wrote: > On Tue, Aug 19, 2003 at 02:54:24PM +0300, Alphonse Ogulla wrote: > > Just configured ppp and established a connection using pon. ifconfig ppp0 > > shows device ppp0 is up and running but with no indication of the > > negotiated bandwidth. How can I establish the speed in Kbps at which I'm > > connected? > > It *might* be a matter of the modem initializing string. Maybe it is > already reported in the log file? Have you tried some graphical dialing > program? > -- > > Shaul Karl, shaulk @ actcom . net . il Not tried Kppd or any other GUI ppp app. More comfortable on CLI. However, /dev/ttyS1, UART 16550A is set to a baud_base of 115200, the fastest attainable speed between the modem and the serial port. On the other hand, I used minicom to configure my 3Com US Robotics external modem to connect at the highest attainable data rate (AT&N0) whilst at the same time enabling auto data compression (AT&K1). /var/log/syslog has in it several lines pertaining to the activity of pppd but cannot deduce the connection speed. Thanks anyway. -- Alphonse Ogulla Nairobi, Kenya
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
